From d96fe4bec79ec4827f24491adfadfecf871a4313 Mon Sep 17 00:00:00 2001
From: Jean-Marc Collin <jean-marc.collin-extern@renault.com>
Date: Sat, 30 Mar 2024 07:51:22 +0000
Subject: [PATCH] Add Nodon module virtuak switch example

---
 README-fr.md | 38 ++++++++++++++++++++++++++++++++++++++
 README.md    | 38 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 76 insertions(+)

diff --git a/README-fr.md b/README-fr.md
index 1e97679..a5b0f0c 100644
--- a/README-fr.md
+++ b/README-fr.md
@@ -75,6 +75,7 @@
 - [Dépannages](#dépannages)
   - [Utilisation d'un Heatzy](#utilisation-dun-heatzy)
   - [Utilisation d'un radiateur avec un fil pilote](#utilisation-dun-radiateur-avec-un-fil-pilote)
+  - [Utilisation d'un radiateur avec un fil pilote](#utilisation-dun-radiateur-avec-un-fil-pilote-1)
   - [Seul le premier radiateur chauffe](#seul-le-premier-radiateur-chauffe)
   - [Le radiateur chauffe alors que la température de consigne est dépassée ou ne chauffe pas alors que la température de la pièce est bien en-dessous de la consigne](#le-radiateur-chauffe-alors-que-la-température-de-consigne-est-dépassée-ou-ne-chauffe-pas-alors-que-la-température-de-la-pièce-est-bien-en-dessous-de-la-consigne)
     - [Type `over_switch` ou `over_valve`](#type-over_switch-ou-over_valve)
@@ -1497,6 +1498,43 @@ Exemple :
 
 </details>
 
+<details>
+<summary>Utilisation d'un radiateur avec un module Nodon</summary>
+
+## Utilisation d'un radiateur avec un fil pilote
+Comme pour le Heatzy ci-dessus vous pouvez utiliser un switch virtuel qui va changer le preset de votre radiateur en fonction de l'état d'allumage du VTherm.
+Exemple :
+```
+- platform: template
+  switches:
+    chauffage_chb_parents:
+      unique_id: chauffage_chb_parents
+      friendly_name: Chauffage chambre parents
+      value_template: "{{ is_state('select.fp_chb_parents_pilot_wire_mode', 'comfort') }}"
+      icon_template: >-
+        {% if is_state('select.fp_chb_parents_pilot_wire_mode', 'comfort') %}
+          mdi:radiator
+        {% elif is_state('select.fp_chb_parents_pilot_wire_mode', 'frost_protection') %}
+          mdi:snowflake
+        {% else %}
+          mdi:radiator-disabled
+        {% endif %}
+      turn_on:
+        service: select.select_option
+        target:
+          entity_id: select.fp_chb_parents_pilot_wire_mode
+        data:
+          option: comfort
+      turn_off:
+        service: select.select_option
+        target:
+          entity_id: select.fp_chb_parents_pilot_wire_mode
+        data:
+          option: eco
+```
+
+</details>
+
 <details>
 <summary>Seul le premier radiateur chauffe</summary>
 
diff --git a/README.md b/README.md
index 7b36bbc..ba1cc38 100644
--- a/README.md
+++ b/README.md
@@ -76,6 +76,7 @@
 - [Troubleshooting](#troubleshooting)
   - [Using a Heatzy](#using-a-heatzy)
   - [Using a Heatsink with a Pilot Wire](#using-a-heatsink-with-a-pilot-wire)
+  - [Using a heater with a Nodon module](#using-a-heater-with-a-nodon-module)
   - [Only the first radiator heats](#only-the-first-radiator-heats)
   - [The radiator heats up even though the setpoint temperature is exceeded or does not heat up even though the room temperature is well below the setpoint](#the-radiator-heats-up-even-though-the-setpoint-temperature-is-exceeded-or-does-not-heat-up-even-though-the-room-temperature-is-well-below-the-setpoint)
     - [Type `over_switch` or `over_valve`](#type-over_switch-or-over_valve)
@@ -1488,6 +1489,43 @@ Example :
 ```
 </details>
 
+<details>
+<summary>Using a heater with a Nodon</summary>
+
+## Using a heater with a Nodon module
+As for the heatzy module above you can use a virtual switch which will change the preset of your heater depending of the state of the VTherm.
+Example :
+```
+- platform: template
+  switches:
+    chauffage_chb_parents:
+      unique_id: chauffage_chb_parents
+      friendly_name: Chauffage chambre parents
+      value_template: "{{ is_state('select.fp_chb_parents_pilot_wire_mode', 'comfort') }}"
+      icon_template: >-
+        {% if is_state('select.fp_chb_parents_pilot_wire_mode', 'comfort') %}
+          mdi:radiator
+        {% elif is_state('select.fp_chb_parents_pilot_wire_mode', 'frost_protection') %}
+          mdi:snowflake
+        {% else %}
+          mdi:radiator-disabled
+        {% endif %}
+      turn_on:
+        service: select.select_option
+        target:
+          entity_id: select.fp_chb_parents_pilot_wire_mode
+        data:
+          option: comfort
+      turn_off:
+        service: select.select_option
+        target:
+          entity_id: select.fp_chb_parents_pilot_wire_mode
+        data:
+          option: eco
+```
+
+</details>
+
 <details>
 <summary>Only the first radiator heats</summary>