Change reset cumulated_error formula

README-fr.md

@@ -128,7 +128,7 @@ En conséquence toute la phase de paramètrage d'un VTherm a été profondemment
 **Note :** les copies d'écran de la configuration d'un VTherm n'ont pas été mises à jour.
 
 # Merci pour la bière [buymecoffee](https://www.buymeacoffee.com/jmcollin78)
-Un grand merci à @salabur, @pvince83, @bergoglio, @EPicLURcher, @ecolorado66, @Kriss1670, @maia, @f.maymil, @moutte69, @Jerome, @Gunnar M, @Greg.o, @John Burgess, @abyssmal, @capinfo26, @Helge, @MattG @Mexx62, @Someone, @Lajull, @giopeco pour les bières. Ca fait très plaisir et ça m'encourage à continuer !
+Un grand merci à @salabur, @pvince83, @bergoglio, @EPicLURcher, @ecolorado66, @Kriss1670, @maia, @f.maymil, @moutte69, @Jerome, @Gunnar M, @Greg.o, @John Burgess, @abyssmal, @capinfo26, @Helge, @MattG @Mexx62, @Someone, @Lajull, @giopeco, @fredericselier, @philpagan pour les bières. Ca fait très plaisir et ça m'encourage à continuer !
 
 
 # Quand l'utiliser et ne pas l'utiliser

README.md

@@ -128,7 +128,7 @@ Consequently, the entire configuration phase of a VTherm has been profoundly mod
 **Note:** the VTherm configuration screenshots have not been updated.
 
 # Thanks for the beer [buymecoffee](https://www.buymeacoffee.com/jmcollin78)
-Many thanks to @salabur, @pvince83, @bergoglio, @EPicLURcher, @ecolorado66, @Kriss1670, @maia, @f.maymil, @moutte69, @Jerome, @Gunnar M, @Greg.o, @John Burgess, @abyssmal, @capinfo26, @Helge, @MattG, @MattG, @Mexx62, @Someone, @Lajull, @giopeco for the beers. It's very nice and encourages me to continue!
+Many thanks to @salabur, @pvince83, @bergoglio, @EPicLURcher, @ecolorado66, @Kriss1670, @maia, @f.maymil, @moutte69, @Jerome, @Gunnar M, @Greg.o, @John Burgess, @abyssmal, @capinfo26, @Helge, @MattG, @MattG, @Mexx62, @Someone, @Lajull, @giopeco, @fredericselier, @philpagan for the beers. It's very nice and encourages me to continue!
 
 # When to use / not use
 This thermostat can control 3 types of equipment:

custom_components/versatile_thermostat/base_thermostat.py

@@ -1233,9 +1233,9 @@ class BaseThermostat(ClimateEntity, RestoreEntity):
             )
 
         # If AC is on maybe we have to change the temperature in force mode, but not in frost mode (there is no Frost protection possible in AC mode)
-        if self._hvac_mode == HVACMode.COOL:
+        if self._hvac_mode == HVACMode.COOL and self.preset_mode != PRESET_NONE:
             if self.preset_mode != PRESET_FROST_PROTECTION:
-                await self._async_set_preset_mode_internal(self._attr_preset_mode, True)
+                await self._async_set_preset_mode_internal(self.preset_mode, True)
             else:
                 await self._async_set_preset_mode_internal(PRESET_ECO, True, False)
 

custom_components/versatile_thermostat/pi_algorithm.py

@@ -47,10 +47,10 @@ class PITemperatureRegulator:
     def set_target_temp(self, target_temp):
         """Set the new target_temp"""
         self.target_temp = target_temp
-        # Do not reset the accumulated error
         # Discussion #191. After a target change we should reset the accumulated error which is certainly wrong now.
-        if self.accumulated_error < 0:
+        # Discussion #384. Finally don't reset the accumulated error but smoothly reset it if the sign is inversed
-            self.accumulated_error = 0
+        # if self.accumulated_error < 0:
+        #     self.accumulated_error = 0
 
     def calculate_regulated_temperature(
         self, room_temp: float, external_temp: float
@@ -71,6 +71,11 @@ class PITemperatureRegulator:
         error = self.target_temp - room_temp
 
         # Calculate the sum of error (I)
+        # Discussion #384. Finally don't reset the accumulated error but smoothly reset it if the sign is inversed
+        # If the error have change its sign, reset smoothly the accumulated error
+        if error * self.accumulated_error < 0:
+            self.accumulated_error = self.accumulated_error / 2.0
+
         self.accumulated_error += error
 
         # Capping of the error
@@ -91,8 +96,7 @@ class PITemperatureRegulator:
 
         result = round(self.target_temp + total_offset, 1)
 
-        # TODO Change to debug after experimental
+        _LOGGER.debug(
-        _LOGGER.info(
             "PITemperatureRegulator - Error: %.2f accumulated_error: %.2f offset: %.2f offset_ext: %.2f target_tem: %.1f regulatedTemp: %.1f",
             error,
             self.accumulated_error,

custom_components/versatile_thermostat/thermostat_climate.py

@@ -214,15 +214,12 @@ class ThermostatOverClimate(BaseThermostat):
                     )
                 )
             ):
-                offset_temp = self.current_temperature - device_temp
+                offset_temp = device_temp - self.current_temperature
 
-            if self.hvac_mode == HVACMode.COOL:
+            target_temp = self.regulated_target_temp + offset_temp
-                target_temp = self.regulated_target_temp - offset_temp
-            else:
-                target_temp = self.regulated_target_temp + offset_temp
 
             _LOGGER.debug(
-                "%s - the device offset temp for regulation is %.2f - internal temp is %.2f. Nes target is %.2f",
+                "%s - The device offset temp for regulation is %.2f - internal temp is %.2f. New target is %.2f",
                 self,
                 offset_temp,
                 device_temp,

tests/test_auto_regulation.py

@@ -127,9 +127,7 @@ async def test_over_climate_regulation(
 
             # the regulated temperature should be under
             assert entity.regulated_target_temp < entity.target_temperature
-            assert (
+            assert entity.regulated_target_temp == 18 - 2.5
-                entity.regulated_target_temp == 18 - 2
-            )  # normally 0.6 but round_to_nearest gives 0.5
 
 
 @pytest.mark.parametrize("expected_lingering_tasks", [True])
@@ -473,10 +471,11 @@ async def test_over_climate_regulation_use_device_temp(
             )
 
         # 3. change temperature so that the regulated temperature should slow down
+        # HVACMODE.HEAT
         # room temp is 15
         # target is 18
-        # internal heater temp is 13
+        # internal heater temp is 20
-        fake_underlying_climate.set_current_temperature(13)
+        fake_underlying_climate.set_current_temperature(20)
         await entity.async_set_temperature(temperature=18)
         await send_ext_temperature_change_event(entity, 9, event_timestamp)
 
@@ -498,7 +497,7 @@ async def test_over_climate_regulation_use_device_temp(
                         "set_temperature",
                         {
                             "entity_id": "climate.mock_climate",
-                            "temperature": 21.4,  # 19.4 + 2
+                            "temperature": 24.4,  # 19.4 + 5
                             "target_temp_high": 30,
                             "target_temp_low": 15,
                         },
@@ -524,7 +523,7 @@ async def test_over_climate_regulation_use_device_temp(
 
             # the regulated temperature should be upper (device offset is +2)
             assert entity.regulated_target_temp < entity.target_temperature
-            assert entity.regulated_target_temp == 22.9
+            assert entity.regulated_target_temp == 22.4
 
             mock_service_call.assert_has_calls(
                 [
@@ -533,7 +532,7 @@ async def test_over_climate_regulation_use_device_temp(
                         "set_temperature",
                         {
                             "entity_id": "climate.mock_climate",
-                            "temperature": 24.9,  # 22.9 + 2° of offset
+                            "temperature": 24.4,  # 22.4 + 2° of offset
                             "target_temp_high": 30,
                             "target_temp_low": 15,
                         },