Cleanup

Add LED support for G713IC

See merge request asus-linux/asusctl!124

.gitlab-ci.yml

@@ -10,6 +10,7 @@ stages:
 test:
   script:
     - cargo check #+nightly check --features "clippy"
+    - cargo test
 
 build:
   only:

CHANGELOG.md

@@ -4,7 +4,117 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-## [Unreleased]
+## [Unreleased ]
+
+## [4.3.0] - 2022-07-21
+### Added
+- Clear command for anime `asusctl anime --clear` will clear the display
+- Re-added support for LED power states on `0x1866` type keyboards
+### Changed
+- Make rog-anime more error tolerent. Remove various asserts and return errors instead
+- Return error if a pixel-gif is larger than the anime-display dimensions
+- Both Anime and Aura dbus interfaces are changed a little
+  - Aura power has changed, all power related settings are now in one method
+  - Anime methods will now return an error (if errored)
+  - /org/asuslinux/Led renamed to /org/asuslinux/Aura
+
+## [4.2.1] - 2022-07-18
+### Added
+- Add panel overdrive support (autodetects if supported)
+- Add detection of dgpu_disable and egpu_enable for diagnostic
+### Changed
+- Fixed save and restore of multizone LED settings
+- Create defaults for multizone
+
+## [4.2.0] - 2022-07-16
+### Added
+- Support for GA402 Anime Matrix display (Author: I-Al-Istannen & Luke Jones)
+- Support for power-config of all LED zones. See `asusctrl led-power --help` (Author: Luke Jones, With much help from: @MNS26)
+- Full support for multizone LED <logo, keyboard, lightbar> (Author: Luke Jones, With much help from: @MNS26)
+- Add ability to load extra data from `/etc/asusd/asusd-user-ledmodes.toml` for LED support if file exits
+- Support for G513IM LED modes
+- Support for GX703HS LED modes
+### Changed
+- Dbus interface for Aura config has been changed, all power control is done with `SetLedsEnabled` and `SetLedsDisabled`
+- Data for anime-matrix now requires passing the laptop model as enum
+- Extra unit tests for anime stuff to help verify things
+
+### Added
+- Support for GA503R LED modes
+### Changed
+- Refactor LED and AniMe tasks
+- Reload keyboard brightness on resume from sleep/hiber
+
+## [4.1.1] - 2022-06-21
+### Changed
+- Fixes to anime matrix system thread cancelation
+
+## [4.1.0] - 2022-06-20
+### Changed
+- Huge refactor to use zbus 2.2 + zvariant 3.0 in system-daemon.
+- Daemons with tasks now use `smol` for async ops.
+- Fixes to fan-curve settings from CLI (Author: Armas Span)
+- Add brightness to anime zbus notification
+- Adjust how threads in AniMe matrix controller work
+- Use proper power-state packet for keyboard LED's (Author: Martin Piffault)
+### Added
+- Support for GA402R LED modes
+- Support for GU502LV LED modes
+- Support for G512 LED modes
+- Support for G513IC LED modes (Author: dada513)
+- Support for G513QM LED modes (Author: Martin Piffault)
+- Add side-LED toggle support (Author: Martin Piffault)
+- Support reloading keyboard mode on wake (from sleep/hiber)
+- Support reloading charge-level on wake (from sleep/hiber)
+- Support running AniMe animation blocks on wake/sleep and boot/shutdown events
+
+# [4.0.7] - 2021-12-19
+### Changed
+- Fix incorrect power-profile validation
+- Update asusd-ledmodes.toml to support Asus Rog Strix G15 G513QE (@LordVicky)
+- Update patch notes and links
+
+# [4.0.6] - 2021-11-01
+### Changed
+- Fix CLI for bios toggles
+### Added
+- Extra commands for AniMe: pixel-image, gif, pixel-gif
+
+# [4.0.5] - 2021-10-27
+### Changed
+- Convert fan curve percentage to 0-255 expected by kernel driver only if '%' char is used, otherwise the expected range for fan power is 0-255
+- Use correct error in daemon for invalid charging limit
+- Enforce charging limit values in range 20-100
+### Added
+- LED modes for G513QR
+
+# [4.0.4] - 2021-10-02
+### Changed
+- Add missing Profile commands
+- Spawn tasks on individual threads to prevent blocking
+- Don't force fan-curve default on reload
+- Begin obsoleting the graphics switch command in favour of supergfxctl
+- Slim down the notification daemon to pure ASUS notifications
+
+# [4.0.3] - 2021-09-16
+### Changed
+- Don't show fan-curve warning if fan-curve available
+- Add G713QR to Strix led-modes
+- Fix part of CLI fan-curve control
+
+# [4.0.2] - 2021-09-14
+### Changed
+- Backup old configs to *-old if parse fails
+- Prevent some types of crashes related to unpatched kernels
+- Add better help for graphics errors
+- Add better help for asusctl general errors
+- Implement fan-curve dbus API
+- Implement partial fan-curve control via CLI tool
+  + Set fan curve for profile + fan gpu/cpu
+
+# [4.0.1] - 2021-09-11
+### Changed
+- Fix asusd-ledmodes.toml
 
 # [4.0.0] - 2021-09-10
 ### Added

Cargo.toml

@@ -2,7 +2,9 @@
 members = ["asusctl", "asus-notify", "daemon", "daemon-user", "rog-supported", "rog-dbus", "rog-anime", "rog-aura", "rog-profiles"]
 
 [profile.release]
-lto = true
+# thin = 57s, asusd = 9.0M
+# fat = 72s, asusd = 6.4M
+lto = "fat"
 debug = false
 opt-level = 3
 panic = "abort"

MANUAL.md

@@ -60,17 +60,17 @@ The defaults are located at `/etc/asusd/asusd-ledmodes.toml`, and on `asusd` sta
 Example:
 ```toml
 [[led_data]]
-prod_family = "ROG Zephyrus M15"
-board_names = ["GU502LU"]
-standard = ["Static", "Breathe", "Strobe", "Pulse"]
-multizone = false
+prod_family = "Strix"
+board_names = ["GL504G"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = ["Key1", "Key2", "Key3", "Key4", "Logo", "BarLeft", "BarRight"]
 per_key = false
 ```
 
 1. `prod_family`: you can find this in `journalctl -b -u asusd`, or `cat /sys/class/dmi/id/product_name`. It should be copied as written. There can be multiple `led-data` groups of the same `prod_family` with differing `board_names`.
 2. `board_names`: is an array of board names in this product family. Find this in the journal as above or by `cat /sys/class/dmi/id/board_name`.
 3. `standard` are the factory preset modes, the names should corrospond to Armory Crate names
-4. `multizone`: some keyboards have 4 zones of LED control, this enables setting a colour in each zone. The keyboard must support this or it has no effect.
+4. `multizone`: some models have 4 to 7 zones of LED control as shown in the example. If the laptop has no zones then an empty array will suffice.
 5. `per_key`: enable per-key RGB effects. The keyboard must support this or it has no effect.
 
 ##### /etc/asusd/aura.conf
@@ -90,14 +90,14 @@ where the number is a percentage.
 
 Some options that you find in Armory Crate are available under this controller, so far there is:
 
-- POST sound: this is the sound you here on bios boot post
+- POST sound: this is the sound you hear on bios boot post
 - G-Sync: this controls if the dGPU (Nvidia) is the *only* GPU, making it the main GPU and disabling the iGPU
 
 These options are not written to the config file as they are stored in efivars. The only way to change these is to use the exposed safe dbus methods, or use the `asusctl` CLI tool.
 
 ### Profiles
 
-asusctl can support setting a power profile via platform_profile drivers. This requires [power-profiles-daemon](https://gitlab.freedesktop.org/hadess/power-profiles-daemon) v0.9.0 minimum. It also requires the kernel patch for platform_profile support to be applied form [here](https://lkml.org/lkml/2021/8/18/1022) - this patch is included in the "rog" kernels we build for fedora and arch, and will hit kernel 5.15 upstream.
+asusctl can support setting a power profile via platform_profile drivers. This requires [power-profiles-daemon](https://gitlab.freedesktop.org/hadess/power-profiles-daemon) v0.10.0 minimum. It also requires the kernel patch for platform_profile support to be applied form [here](https://lkml.org/lkml/2021/8/18/1022) - this patch is merged to 5.15 kernel upstream.
 
 A common use of asusctl is to bind the `fn+f5` (fan) key to `asusctl profile -n` to cycle through the 3 profiles:
 1. Balanced
@@ -106,7 +106,7 @@ A common use of asusctl is to bind the `fn+f5` (fan) key to `asusctl profile -n`
 
 #### Fan curves
 
-Fan curve support requires a laptop that supports it (this is detected automatically) and the kernel patch from [here](https://lkml.org/lkml/2021/8/29/50) which is still in review as of 29/09/21. As with Profiles, this is included in the kernels we build, and will hit 5.15 kernel upstream.
+Fan curve support requires a laptop that supports it (this is detected automatically) and the kernel patch from [here](https://lkml.org/lkml/2021/10/23/250) which is accepted for the 5.17 kernel release .
 
 The fan curve format can be of varying formats:
 
@@ -293,7 +293,7 @@ A plain non-float integer.
 
 ## asusctl
 
-`asusctl` is a commandline interface which intends to be the main method of interacting with `asusd`. I can be used in any place a terminal app can be used.
+`asusctl` is a commandline interface which intends to be the main method of interacting with `asusd`. It can be used in any place a terminal app can be used.
 
 This program will query `asusd` for the `Support` level of the laptop and show or hide options according to this support level.
 
@@ -356,4 +356,4 @@ Reference to any ASUS products, services, processes, or other information and/or
 
 The use of ROG and ASUS trademarks within this website and associated tools and libraries is only to provide a recognisable identifier to users to enable them to associate that these tools will work with ASUS ROG laptops.
 
----
+---

README.md

@@ -5,10 +5,11 @@
 `asusd` is a utility for Linux to control many aspects of various ASUS laptops
 but can also be used with non-asus laptops with reduced features.
 
-## Kernel patches required
+## Kernel support
 
-1. https://lkml.org/lkml/2021/8/20/232
-2. https://lkml.org/lkml/2021/8/18/1022
+**The minimum supported kernel version is 5.15**
+
+Fan curve control on laptops with this feature require [this patch](https://lkml.org/lkml/2021/10/23/250) which has been merged for 5.17 upstream.
 
 ## Goals
 
@@ -24,10 +25,6 @@ supported (while asusd might still run fine on them). For best support use fedor
 Point 4? asusd currently uses a tiny fraction of cpu time, and less than 1Mb of ram, the way
 a system-level daemon should.
 
-**NOTICE:**
-
-Various patches are required for keyboard support. See [this post](https://asus-linux.org/blog/updates-2021-05-06/) for details on status and which kernels will have which patches.
-
 ## Discord
 
 [Discord server link](https://discord.gg/4ZKGd7Un5t)
@@ -61,27 +58,27 @@ will probably suffer another rename once it becomes generic enough to do so.
 
 # BUILDING
 
-Requirements are rust >= 1.47 installed from rustup.io if the distro provided version is too old, and `make`.
+Requirements are rust >= 1.57 installed from rustup.io if the distro provided version is too old, and `make`.
 
-**Ubuntu*:** `apt install libclang-dev libudev-dev`
+**Ubuntu (unsuported):**
 
-**fedora:** `dnf install clang-devel systemd-devel`
+    apt install libclang-dev libudev-dev
+    curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
+    make
+    sudo make install
+
+**fedora:**
+
+    dnf install clang-devel systemd-devel cargo
+    make
+    sudo make install
 
 ## Installing
+- Fedora copr = https://copr.fedorainfracloud.org/coprs/lukenukem/asus-linux/
+- openSUSE = https://download.opensuse.org/repositories/home:/luke_nukem:/asus/
+- Ubuntu = not supported due to packaging woes, but you can build and install on your own.
 
-Download repositories are available [here](https://download.opensuse.org/repositories/home:/luke_nukem:/asus/) for the latest versions of Fedora, Ubuntu, and openSUSE.
-
-### Ubuntu
-
-    sudo su -c "echo 'deb https://download.opensuse.org/repositories/home:/luke_nukem:/asus/xUbuntu_21.04/ /' > /etc/apt/sources.list.d/luke_nukem.list"
-    curl -fsSL https://download.opensuse.org/repositories/home:/luke_nukem:/asus/xUbuntu_21.04/Release.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/home_luke_nukem.gpg > /dev/null
-    sudo apt-get update
-    sudo apt-get install asusctl dkms-hid-asus-rog
-
-
----
-
-Run `make` then `sudo make install` then reboot.
+=======
 
 The default init method is to use the udev rule, this ensures that the service is
 started when the device is initialised and ready.

asus-notify/Cargo.toml

@@ -1,22 +1,22 @@
 [package]
 name = "asus-notify"
-version = "3.0.2"
+version = "3.1.0"
 authors = ["Luke D Jones <luke@ljones.dev>"]
 edition = "2018"
 
 # See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
 
 [dependencies]
-zbus = "^1.9"
+zbus = "^2.2"
 # serialisation
 serde_json = "^1.0"
 rog_dbus = { path = "../rog-dbus" }
 rog_aura = { path = "../rog-aura" }
 rog_supported = { path = "../rog-supported" }
 rog_profiles = { path = "../rog-profiles" }
-supergfxctl = { git = "https://gitlab.com/asus-linux/supergfxctl.git", tag = "2.0.0" }
+smol = "^1.2"
 
 [dependencies.notify-rust]
 version = "^4.3"
 default-features = false
-features = ["z"]
+features = ["z"]

asus-notify/src/main.rs

@@ -1,15 +1,16 @@
 use notify_rust::{Hint, Notification, NotificationHandle};
 use rog_aura::AuraEffect;
-use rog_dbus::{DbusProxies, Signals};
+use rog_dbus::{
+    zbus_charge::ChargeProxy, zbus_led::LedProxy, zbus_profile::ProfileProxy,
+    zbus_rogbios::RogBiosProxy,
+};
 use rog_profiles::Profile;
-use std::error::Error;
-use std::sync::mpsc::channel;
-use std::thread::sleep;
-use std::time::Duration;
-use std::{process, thread};
-use supergfxctl::gfx_vendors::{GfxRequiredUserAction, GfxVendors};
-use supergfxctl::zbus_proxy::GfxProxy;
-use zbus::Connection;
+use smol::{future, Executor};
+use std::{
+    error::Error,
+    sync::{Arc, Mutex},
+};
+use zbus::export::futures_util::StreamExt;
 
 const NOTIF_HEADER: &str = "ROG Control";
 
@@ -19,7 +20,7 @@ macro_rules! notify {
             notif.close();
         }
         if let Ok(x) = $notifier($data) {
-            $last_notif = Some(x);
+            $last_notif.replace(x);
         }
     };
 }
@@ -34,99 +35,99 @@ macro_rules! base_notification {
     };
 }
 
+type SharedHandle = Arc<Mutex<Option<NotificationHandle>>>;
+
 fn main() -> Result<(), Box<dyn std::error::Error>> {
     println!("asus-notify version {}", env!("CARGO_PKG_VERSION"));
     println!("   rog-dbus version {}", rog_dbus::VERSION);
-    println!("supergfxctl version {}", supergfxctl::VERSION);
 
-    let (proxies, conn) = DbusProxies::new()?;
-    let signals = Signals::new(&proxies)?;
+    let last_notification: SharedHandle = Arc::new(Mutex::new(None));
 
-    let mut last_notification: Option<NotificationHandle> = None;
+    let executor = Executor::new();
+    // BIOS notif
+    let x = last_notification.clone();
+    executor
+        .spawn(async move {
+            let conn = zbus::Connection::system().await.unwrap();
+            let proxy = RogBiosProxy::new(&conn).await.unwrap();
+            if let Ok(p) = proxy.receive_notify_post_boot_sound().await {
+                p.for_each(|e| {
+                    if let Ok(out) = e.args() {
+                        if let Ok(ref mut lock) = x.try_lock() {
+                            notify!(do_post_sound_notif, lock, &out.sound());
+                        }
+                    }
+                    future::ready(())
+                })
+                .await;
+            };
+        })
+        .detach();
 
-    let recv = proxies.setup_recv(conn);
-    let mut err_count = 0;
+    // Charge notif
+    let x = last_notification.clone();
+    executor
+        .spawn(async move {
+            let conn = zbus::Connection::system().await.unwrap();
+            let proxy = ChargeProxy::new(&conn).await.unwrap();
+            if let Ok(p) = proxy.receive_notify_charge().await {
+                p.for_each(|e| {
+                    if let Ok(out) = e.args() {
+                        if let Ok(ref mut lock) = x.try_lock() {
+                            notify!(do_charge_notif, lock, &out.limit);
+                        }
+                    }
+                    future::ready(())
+                })
+                .await;
+            };
+        })
+        .detach();
 
-    gfx_thread()?;
+    // Profile notif
+    let x = last_notification.clone();
+    executor
+        .spawn(async move {
+            let conn = zbus::Connection::system().await.unwrap();
+            let proxy = ProfileProxy::new(&conn).await.unwrap();
+            if let Ok(p) = proxy.receive_notify_profile().await {
+                p.for_each(|e| {
+                    if let Ok(out) = e.args() {
+                        if let Ok(ref mut lock) = x.try_lock() {
+                            notify!(do_thermal_notif, lock, &out.profile);
+                        }
+                    }
+                    future::ready(())
+                })
+                .await;
+            };
+        })
+        .detach();
+
+    // LED notif
+    executor
+        .spawn(async move {
+            let conn = zbus::Connection::system().await.unwrap();
+            let proxy = LedProxy::new(&conn).await.unwrap();
+            if let Ok(p) = proxy.receive_notify_led().await {
+                p.for_each(|e| {
+                    if let Ok(out) = e.args() {
+                        if let Ok(ref mut lock) = last_notification.try_lock() {
+                            notify!(do_led_notif, lock, &out.data);
+                        }
+                    }
+                    future::ready(())
+                })
+                .await;
+            };
+        })
+        .detach();
 
     loop {
-        sleep(Duration::from_millis(100));
-        if let Err(err) = recv.next_signal() {
-            if err_count < 3 {
-                err_count += 1;
-                println!("{}", err);
-            }
-            if err_count == 3 {
-                err_count += 1;
-                println!("Max error count reached. Spooling silently.");
-            }
-            sleep(Duration::from_millis(2000));
-            continue;
-        }
-        err_count = 0;
-
-        if let Ok(data) = signals.led_mode.try_recv() {
-            notify!(do_led_notif, last_notification, &data);
-        }
-        if let Ok(data) = signals.profile.try_recv() {
-            notify!(do_thermal_notif, last_notification, &data);
-        }
-        if let Ok(data) = signals.charge.try_recv() {
-            notify!(do_charge_notif, last_notification, &data);
-        }
+        smol::block_on(executor.tick());
     }
 }
 
-fn gfx_thread() -> Result<(), Box<dyn std::error::Error>> {
-    let mut last_notification: Option<NotificationHandle> = None;
-
-    let conn = Connection::new_system()?;
-    let proxy = GfxProxy::new(&conn)?;
-
-    let (tx1, rx1) = channel();
-    proxy.connect_notify_gfx(tx1)?;
-
-    let (tx2, rx2) = channel();
-    proxy.connect_notify_action(tx2)?;
-
-    thread::spawn(move || loop {
-        if proxy
-            .next_signal()
-            .map_err(|e| println!("Error: {}", e))
-            .is_err()
-        {
-            break;
-        }
-
-        if let Ok(data) = rx1.try_recv() {
-            notify!(do_gfx_notif, last_notification, &data);
-        }
-
-        if let Ok(data) = rx2.try_recv() {
-            match data {
-                GfxRequiredUserAction::Logout | GfxRequiredUserAction::Reboot => {
-                    do_gfx_action_notif(&data)
-                        .map_err(|e| {
-                            println!("Error: {}", e);
-                        })
-                        .ok();
-                }
-                GfxRequiredUserAction::Integrated => {
-                    base_notification!(
-                        "You must be in integrated mode first to switch to the requested mode"
-                    )
-                    .map_err(|e| {
-                        println!("Error: {}", e);
-                    })
-                    .ok();
-                }
-                GfxRequiredUserAction::None => {}
-            }
-        }
-    });
-    Ok(())
-}
-
 fn do_thermal_notif(profile: &Profile) -> Result<NotificationHandle, Box<dyn Error>> {
     let icon = match profile {
         Profile::Balanced => "asus_notif_yellow",
@@ -160,51 +161,6 @@ fn do_charge_notif(limit: &u8) -> Result<NotificationHandle, notify_rust::error:
     base_notification!(&format!("Battery charge limit changed to {}", limit))
 }
 
-fn do_gfx_notif(vendor: &GfxVendors) -> Result<NotificationHandle, notify_rust::error::Error> {
-    let icon = match vendor {
-        GfxVendors::Nvidia => "/usr/share/icons/hicolor/scalable/status/gpu-nvidia.svg",
-        GfxVendors::Integrated => "/usr/share/icons/hicolor/scalable/status/gpu-integrated.svg",
-        GfxVendors::Compute => "/usr/share/icons/hicolor/scalable/status/gpu-compute.svg",
-        GfxVendors::Vfio => "/usr/share/icons/hicolor/scalable/status/gpu-vfio.svg",
-        GfxVendors::Hybrid => "/usr/share/icons/hicolor/scalable/status/gpu-hybrid.svg",
-    };
-    Notification::new()
-        .summary(NOTIF_HEADER)
-        .body(&format!(
-            "Graphics mode changed to {}",
-            <&str>::from(vendor)
-        ))
-        .timeout(2000)
-        .icon(icon)
-        .show()
-}
-
-fn do_gfx_action_notif(vendor: &GfxRequiredUserAction) -> Result<(), notify_rust::error::Error> {
-    let mut notif = Notification::new()
-        .summary(NOTIF_HEADER)
-        .timeout(2000)
-        .urgency(notify_rust::Urgency::Critical)
-        .icon("/usr/share/icons/hicolor/scalable/status/notification-reboot.svg")
-        .finalize();
-
-    if matches!(vendor, GfxRequiredUserAction::Logout) {
-        notif.action("logout", "Logout now?");
-    } else if matches!(vendor, GfxRequiredUserAction::Reboot) {
-        notif.action("reboot", "Reboot now?");
-    }
-
-    notif.body("Graphics mode changed");
-    notif.show()?.wait_for_action(|action| match action {
-        "logout" => {
-            process::Command::new("gnome-session-quit").spawn().ok();
-        }
-        "reboot" => {
-            process::Command::new("systemctl")
-                .arg("reboot")
-                .spawn()
-                .ok();
-        }
-        _ => (),
-    });
-    Ok(())
+fn do_post_sound_notif(on: &bool) -> Result<NotificationHandle, notify_rust::error::Error> {
+    base_notification!(&format!("BIOS Post sound {}", on))
 }

asusctl/Cargo.toml

@@ -1,13 +1,13 @@
 [package]
 name = "asusctl"
-version = "4.0.0"
+version = "4.3.0"
 authors = ["Luke D Jones <luke@ljones.dev>"]
 edition = "2018"
 
 # See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
 
 [dependencies]
-zbus = "^1.9.1"
+zbus = "^2.2"
 rog_anime = { path = "../rog-anime" }
 rog_aura = { path = "../rog-aura" }
 rog_dbus = { path = "../rog-dbus" }
@@ -15,12 +15,12 @@ rog_profiles = { path = "../rog-profiles" }
 rog_supported = { path = "../rog-supported" }
 daemon = { path = "../daemon" }
 gumdrop = "^0.8"
-supergfxctl = { git = "https://gitlab.com/asus-linux/supergfxctl.git", tag = "2.0.0" }
+toml = "^0.5.8"
 
 sysfs-class = "^0.1.2"
 
 [dev-dependencies]
-tinybmp = "^0.2.3"
-glam = "0.14.0"
+tinybmp = "^0.3.3"
+glam = "0.20.5"
 rog_dbus = { path = "../rog-dbus" }
-gif = "^0.11.2"
+gif = "^0.11.2"

asusctl/examples/anime-diag-png.rs

@@ -1,10 +1,10 @@
 use std::{env, error::Error, path::Path, process::exit};
 
-use rog_anime::{AnimeDataBuffer, AnimeDiagonal};
-use rog_dbus::RogDbusClient;
+use rog_anime::{usb::get_anime_type, AnimeDiagonal, AnimeType};
+use rog_dbus::RogDbusClientBlocking;
 
 fn main() -> Result<(), Box<dyn Error>> {
-    let (client, _) = RogDbusClient::new().unwrap();
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
 
     let args: Vec<String> = env::args().into_iter().collect();
     if args.len() != 3 {
@@ -13,13 +13,19 @@ fn main() -> Result<(), Box<dyn Error>> {
         exit(-1);
     }
 
-    let matrix =
-        AnimeDiagonal::from_png(Path::new(&args[1]), None, args[2].parse::<f32>().unwrap())?;
+    let matrix = AnimeDiagonal::from_png(
+        Path::new(&args[1]),
+        None,
+        args[2].parse::<f32>().unwrap(),
+        AnimeType::GA401,
+    )?;
+
+    let anime_type = get_anime_type()?;
 
     client
         .proxies()
         .anime()
-        .write(<AnimeDataBuffer>::from(&matrix))
+        .write(matrix.into_data_buffer(anime_type)?)
         .unwrap();
 
     Ok(())

asusctl/examples/anime-diag.rs

@@ -1,7 +1,7 @@
 use std::{thread::sleep, time::Duration};
 
-use rog_anime::{AnimeDataBuffer, AnimeDiagonal};
-use rog_dbus::RogDbusClient;
+use rog_anime::{usb::get_anime_type, AnimeDiagonal, AnimeType};
+use rog_dbus::RogDbusClientBlocking;
 
 // In usable data:
 // Top row start at 1, ends at 32
@@ -9,10 +9,10 @@ use rog_dbus::RogDbusClient;
 // 74w x 36h diagonal used by the windows app
 
 fn main() {
-    let (client, _) = RogDbusClient::new().unwrap();
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
 
     for step in (2..50).rev() {
-        let mut matrix = AnimeDiagonal::new(None);
+        let mut matrix = AnimeDiagonal::new(AnimeType::GA401, None);
         for c in (0..60).into_iter().step_by(step) {
             for i in matrix.get_mut().iter_mut() {
                 i[c] = 50;
@@ -25,8 +25,12 @@ fn main() {
             }
         }
 
-        let m = <AnimeDataBuffer>::from(&matrix);
-        client.proxies().anime().write(m).unwrap();
+        let anime_type = get_anime_type().unwrap();
+        client
+            .proxies()
+            .anime()
+            .write(matrix.into_data_buffer(anime_type).unwrap())
+            .unwrap();
         sleep(Duration::from_millis(300));
     }
 }

asusctl/examples/anime-gif.rs

@@ -1,10 +1,10 @@
 use std::{env, path::Path, thread::sleep};
 
-use rog_anime::{ActionData, ActionLoader, Sequences};
-use rog_dbus::RogDbusClient;
+use rog_anime::{usb::get_anime_type, ActionData, ActionLoader, Sequences};
+use rog_dbus::RogDbusClientBlocking;
 
 fn main() {
-    let (client, _) = RogDbusClient::new().unwrap();
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
 
     let args: Vec<String> = env::args().into_iter().collect();
     if args.len() != 3 {
@@ -14,7 +14,8 @@ fn main() {
 
     let path = Path::new(&args[1]);
     let brightness = args[2].parse::<f32>().unwrap();
-    let mut seq = Sequences::new();
+    let anime_type = get_anime_type().unwrap();
+    let mut seq = Sequences::new(anime_type);
     seq.insert(
         0,
         &ActionLoader::AsusAnimation {

asusctl/examples/anime-grid.rs

@@ -1,5 +1,6 @@
-use rog_anime::{AnimeDataBuffer, AnimeGrid};
-use rog_dbus::RogDbusClient;
+use rog_anime::{usb::get_anime_type, AnimeDataBuffer, AnimeGrid};
+use rog_dbus::RogDbusClientBlocking;
+use std::convert::TryFrom;
 
 // In usable data:
 // Top row start at 1, ends at 32
@@ -7,8 +8,9 @@ use rog_dbus::RogDbusClient;
 // 74w x 36h diagonal used by the windows app
 
 fn main() {
-    let (client, _) = RogDbusClient::new().unwrap();
-    let mut matrix = AnimeGrid::new(None);
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+    let anime_type = get_anime_type().unwrap();
+    let mut matrix = AnimeGrid::new(anime_type);
     let tmp = matrix.get_mut();
 
     let mut i = 0;
@@ -38,7 +40,7 @@ fn main() {
         }
     }
 
-    let matrix = <AnimeDataBuffer>::from(matrix);
+    let matrix = <AnimeDataBuffer>::try_from(matrix).unwrap();
 
     client.proxies().anime().write(matrix).unwrap();
 }

asusctl/examples/anime-outline.rs

@@ -1,128 +1,129 @@
-use rog_anime::AnimeDataBuffer;
-use rog_dbus::RogDbusClient;
+use rog_anime::{usb::get_anime_type, AnimeDataBuffer};
+use rog_dbus::RogDbusClientBlocking;
 
 // In usable data:
 // Top row start at 1, ends at 32
 
 fn main() {
-    let (client, _) = RogDbusClient::new().unwrap();
-    let mut matrix = AnimeDataBuffer::new();
-    matrix.get_mut()[1] = 100; // start = 1
-    for n in matrix.get_mut()[2..32].iter_mut() {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+    let anime_type = get_anime_type().unwrap();
+    let mut matrix = AnimeDataBuffer::new(anime_type);
+    matrix.data_mut()[1] = 100; // start = 1
+    for n in matrix.data_mut()[2..32].iter_mut() {
         *n = 250;
     }
-    matrix.get_mut()[32] = 100; // end
-    matrix.get_mut()[34] = 100; // start x = 0
-    matrix.get_mut()[66] = 100; // end
-    matrix.get_mut()[69] = 100; // start x = 1
-    matrix.get_mut()[101] = 100; // end
-    matrix.get_mut()[102] = 100; // start
-    matrix.get_mut()[134] = 100; // end
-    matrix.get_mut()[137] = 100; // start
-    matrix.get_mut()[169] = 100; // end
-    matrix.get_mut()[170] = 100; // start
-    matrix.get_mut()[202] = 100; // end
-    matrix.get_mut()[204] = 100; // start
-    matrix.get_mut()[236] = 100; // end
-    matrix.get_mut()[237] = 100; // start
-    matrix.get_mut()[268] = 100; // end
-    matrix.get_mut()[270] = 100; // start
-    matrix.get_mut()[301] = 100; // end
-    matrix.get_mut()[302] = 100; // start
-    matrix.get_mut()[332] = 100; // end
-    matrix.get_mut()[334] = 100; // start
-    matrix.get_mut()[364] = 100; // end
-    matrix.get_mut()[365] = 100; // start
-    matrix.get_mut()[394] = 100; // end
-    matrix.get_mut()[396] = 100; // start
-    matrix.get_mut()[425] = 100; // end
-    matrix.get_mut()[426] = 100; // start
-    matrix.get_mut()[454] = 100; // end
-    matrix.get_mut()[456] = 100; // start
-    matrix.get_mut()[484] = 100; // end
-    matrix.get_mut()[485] = 100; // start
-    matrix.get_mut()[512] = 100; // end
-    matrix.get_mut()[514] = 100; // start
-    matrix.get_mut()[541] = 100; // end
-    matrix.get_mut()[542] = 100; // start
-    matrix.get_mut()[568] = 100; // end
-    matrix.get_mut()[570] = 100; // start
-    matrix.get_mut()[596] = 100; // end
-    matrix.get_mut()[597] = 100; // start
-    matrix.get_mut()[622] = 100; // end
-    matrix.get_mut()[624] = 100; // start
-    matrix.get_mut()[649] = 100; // end
-    matrix.get_mut()[650] = 100; // start
-    matrix.get_mut()[674] = 100; // end
-    matrix.get_mut()[676] = 100; // start
-    matrix.get_mut()[700] = 100; // end
-    matrix.get_mut()[701] = 100; // start
-    matrix.get_mut()[724] = 100; // end
-    matrix.get_mut()[726] = 100; // start
-    matrix.get_mut()[749] = 100; // end
-    matrix.get_mut()[750] = 100; // start
-    matrix.get_mut()[772] = 100; // end
-    matrix.get_mut()[774] = 100; // start
-    matrix.get_mut()[796] = 100; // end
-    matrix.get_mut()[797] = 100; // start
-    matrix.get_mut()[818] = 100; // end
-    matrix.get_mut()[820] = 100; // start
-    matrix.get_mut()[841] = 100; // end
-    matrix.get_mut()[842] = 100; // start
-    matrix.get_mut()[862] = 100; // end
-    matrix.get_mut()[864] = 100; // start
-    matrix.get_mut()[884] = 100; // end
-    matrix.get_mut()[885] = 100; // start
-    matrix.get_mut()[904] = 100; // end
-    matrix.get_mut()[906] = 100; // start
-    matrix.get_mut()[925] = 100; // end
-    matrix.get_mut()[926] = 100; // start
-    matrix.get_mut()[944] = 100; // end
-    matrix.get_mut()[946] = 100; // start
-    matrix.get_mut()[964] = 100; // end
-    matrix.get_mut()[965] = 100; // start
-    matrix.get_mut()[982] = 100; // end
-    matrix.get_mut()[984] = 100; // start
-    matrix.get_mut()[1001] = 100; // end
-    matrix.get_mut()[1002] = 100; // start
-    matrix.get_mut()[1018] = 100; // end
-    matrix.get_mut()[1020] = 100; // start
-    matrix.get_mut()[1036] = 100; // end
-    matrix.get_mut()[1037] = 100; // start
-    matrix.get_mut()[1052] = 100; // end
-    matrix.get_mut()[1054] = 100; // start
-    matrix.get_mut()[1069] = 100; // end
-    matrix.get_mut()[1070] = 100; // start
-    matrix.get_mut()[1084] = 100; // end
-    matrix.get_mut()[1086] = 100; // start
-    matrix.get_mut()[1100] = 100; // end
-    matrix.get_mut()[1101] = 100; // start
-    matrix.get_mut()[1114] = 100; // end
-    matrix.get_mut()[1116] = 100; // start
-    matrix.get_mut()[1129] = 100; // end
-    matrix.get_mut()[1130] = 100; // start
-    matrix.get_mut()[1142] = 100; // end
-    matrix.get_mut()[1144] = 100; // start
-    matrix.get_mut()[1156] = 100; // end
-    matrix.get_mut()[1157] = 100; // start
-    matrix.get_mut()[1168] = 100; // end
-    matrix.get_mut()[1170] = 100; // start
-    matrix.get_mut()[1181] = 100; // end
-    matrix.get_mut()[1182] = 100; // start
-    matrix.get_mut()[1192] = 100; // end
-    matrix.get_mut()[1194] = 100; // start
-    matrix.get_mut()[1204] = 100; // end
-    matrix.get_mut()[1205] = 100; // start
-    matrix.get_mut()[1214] = 100; // end
-    matrix.get_mut()[1216] = 100; // start
-    matrix.get_mut()[1225] = 100; // end
-    matrix.get_mut()[1226] = 100; // start
-    matrix.get_mut()[1234] = 100; // end
-    matrix.get_mut()[1236] = 100; // start
-    for n in matrix.get_mut()[1237..1244].iter_mut() {
+    matrix.data_mut()[32] = 100; // end
+    matrix.data_mut()[34] = 100; // start x = 0
+    matrix.data_mut()[66] = 100; // end
+    matrix.data_mut()[69] = 100; // start x = 1
+    matrix.data_mut()[101] = 100; // end
+    matrix.data_mut()[102] = 100; // start
+    matrix.data_mut()[134] = 100; // end
+    matrix.data_mut()[137] = 100; // start
+    matrix.data_mut()[169] = 100; // end
+    matrix.data_mut()[170] = 100; // start
+    matrix.data_mut()[202] = 100; // end
+    matrix.data_mut()[204] = 100; // start
+    matrix.data_mut()[236] = 100; // end
+    matrix.data_mut()[237] = 100; // start
+    matrix.data_mut()[268] = 100; // end
+    matrix.data_mut()[270] = 100; // start
+    matrix.data_mut()[301] = 100; // end
+    matrix.data_mut()[302] = 100; // start
+    matrix.data_mut()[332] = 100; // end
+    matrix.data_mut()[334] = 100; // start
+    matrix.data_mut()[364] = 100; // end
+    matrix.data_mut()[365] = 100; // start
+    matrix.data_mut()[394] = 100; // end
+    matrix.data_mut()[396] = 100; // start
+    matrix.data_mut()[425] = 100; // end
+    matrix.data_mut()[426] = 100; // start
+    matrix.data_mut()[454] = 100; // end
+    matrix.data_mut()[456] = 100; // start
+    matrix.data_mut()[484] = 100; // end
+    matrix.data_mut()[485] = 100; // start
+    matrix.data_mut()[512] = 100; // end
+    matrix.data_mut()[514] = 100; // start
+    matrix.data_mut()[541] = 100; // end
+    matrix.data_mut()[542] = 100; // start
+    matrix.data_mut()[568] = 100; // end
+    matrix.data_mut()[570] = 100; // start
+    matrix.data_mut()[596] = 100; // end
+    matrix.data_mut()[597] = 100; // start
+    matrix.data_mut()[622] = 100; // end
+    matrix.data_mut()[624] = 100; // start
+    matrix.data_mut()[649] = 100; // end
+    matrix.data_mut()[650] = 100; // start
+    matrix.data_mut()[674] = 100; // end
+    matrix.data_mut()[676] = 100; // start
+    matrix.data_mut()[700] = 100; // end
+    matrix.data_mut()[701] = 100; // start
+    matrix.data_mut()[724] = 100; // end
+    matrix.data_mut()[726] = 100; // start
+    matrix.data_mut()[749] = 100; // end
+    matrix.data_mut()[750] = 100; // start
+    matrix.data_mut()[772] = 100; // end
+    matrix.data_mut()[774] = 100; // start
+    matrix.data_mut()[796] = 100; // end
+    matrix.data_mut()[797] = 100; // start
+    matrix.data_mut()[818] = 100; // end
+    matrix.data_mut()[820] = 100; // start
+    matrix.data_mut()[841] = 100; // end
+    matrix.data_mut()[842] = 100; // start
+    matrix.data_mut()[862] = 100; // end
+    matrix.data_mut()[864] = 100; // start
+    matrix.data_mut()[884] = 100; // end
+    matrix.data_mut()[885] = 100; // start
+    matrix.data_mut()[904] = 100; // end
+    matrix.data_mut()[906] = 100; // start
+    matrix.data_mut()[925] = 100; // end
+    matrix.data_mut()[926] = 100; // start
+    matrix.data_mut()[944] = 100; // end
+    matrix.data_mut()[946] = 100; // start
+    matrix.data_mut()[964] = 100; // end
+    matrix.data_mut()[965] = 100; // start
+    matrix.data_mut()[982] = 100; // end
+    matrix.data_mut()[984] = 100; // start
+    matrix.data_mut()[1001] = 100; // end
+    matrix.data_mut()[1002] = 100; // start
+    matrix.data_mut()[1018] = 100; // end
+    matrix.data_mut()[1020] = 100; // start
+    matrix.data_mut()[1036] = 100; // end
+    matrix.data_mut()[1037] = 100; // start
+    matrix.data_mut()[1052] = 100; // end
+    matrix.data_mut()[1054] = 100; // start
+    matrix.data_mut()[1069] = 100; // end
+    matrix.data_mut()[1070] = 100; // start
+    matrix.data_mut()[1084] = 100; // end
+    matrix.data_mut()[1086] = 100; // start
+    matrix.data_mut()[1100] = 100; // end
+    matrix.data_mut()[1101] = 100; // start
+    matrix.data_mut()[1114] = 100; // end
+    matrix.data_mut()[1116] = 100; // start
+    matrix.data_mut()[1129] = 100; // end
+    matrix.data_mut()[1130] = 100; // start
+    matrix.data_mut()[1142] = 100; // end
+    matrix.data_mut()[1144] = 100; // start
+    matrix.data_mut()[1156] = 100; // end
+    matrix.data_mut()[1157] = 100; // start
+    matrix.data_mut()[1168] = 100; // end
+    matrix.data_mut()[1170] = 100; // start
+    matrix.data_mut()[1181] = 100; // end
+    matrix.data_mut()[1182] = 100; // start
+    matrix.data_mut()[1192] = 100; // end
+    matrix.data_mut()[1194] = 100; // start
+    matrix.data_mut()[1204] = 100; // end
+    matrix.data_mut()[1205] = 100; // start
+    matrix.data_mut()[1214] = 100; // end
+    matrix.data_mut()[1216] = 100; // start
+    matrix.data_mut()[1225] = 100; // end
+    matrix.data_mut()[1226] = 100; // start
+    matrix.data_mut()[1234] = 100; // end
+    matrix.data_mut()[1236] = 100; // start
+    for n in matrix.data_mut()[1237..1244].iter_mut() {
         *n = 250;
     }
-    matrix.get_mut()[1244] = 100; // end
+    matrix.data_mut()[1244] = 100; // end
     println!("{:?}", &matrix);
 
     client.proxies().anime().write(matrix).unwrap();

asusctl/examples/anime-png.rs

@@ -1,12 +1,14 @@
+use std::convert::TryFrom;
 use std::{env, error::Error, path::Path, process::exit};
 
 use rog_anime::{
+    usb::get_anime_type,
     AnimeDataBuffer, {AnimeImage, Vec2},
 };
-use rog_dbus::RogDbusClient;
+use rog_dbus::RogDbusClientBlocking;
 
 fn main() -> Result<(), Box<dyn Error>> {
-    let (client, _) = RogDbusClient::new().unwrap();
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
 
     let args: Vec<String> = env::args().into_iter().collect();
     if args.len() != 7 {
@@ -15,6 +17,7 @@ fn main() -> Result<(), Box<dyn Error>> {
         exit(-1);
     }
 
+    let anime_type = get_anime_type()?;
     let matrix = AnimeImage::from_png(
         Path::new(&args[1]),
         args[2].parse::<f32>().unwrap(),
@@ -24,12 +27,13 @@ fn main() -> Result<(), Box<dyn Error>> {
             args[5].parse::<f32>().unwrap(),
         ),
         args[6].parse::<f32>().unwrap(),
+        anime_type,
     )?;
 
     client
         .proxies()
         .anime()
-        .write(<AnimeDataBuffer>::from(&matrix))
+        .write(<AnimeDataBuffer>::try_from(&matrix)?)
         .unwrap();
 
     Ok(())

asusctl/examples/anime-spinning.rs

@@ -1,14 +1,16 @@
+use std::convert::TryFrom;
 use std::{
     env, error::Error, f32::consts::PI, path::Path, process::exit, thread::sleep, time::Duration,
 };
 
 use rog_anime::{
+    usb::get_anime_type,
     AnimeDataBuffer, {AnimeImage, Vec2},
 };
-use rog_dbus::RogDbusClient;
+use rog_dbus::RogDbusClientBlocking;
 
 fn main() -> Result<(), Box<dyn Error>> {
-    let (client, _) = RogDbusClient::new().unwrap();
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
 
     let args: Vec<String> = env::args().into_iter().collect();
     if args.len() != 7 {
@@ -17,6 +19,7 @@ fn main() -> Result<(), Box<dyn Error>> {
         exit(-1);
     }
 
+    let anime_type = get_anime_type()?;
     let mut matrix = AnimeImage::from_png(
         Path::new(&args[1]),
         args[2].parse::<f32>().unwrap(),
@@ -26,6 +29,7 @@ fn main() -> Result<(), Box<dyn Error>> {
             args[5].parse::<f32>().unwrap(),
         ),
         args[6].parse::<f32>().unwrap(),
+        anime_type,
     )?;
 
     loop {
@@ -38,7 +42,7 @@ fn main() -> Result<(), Box<dyn Error>> {
         client
             .proxies()
             .anime()
-            .write(<AnimeDataBuffer>::from(&matrix))
+            .write(<AnimeDataBuffer>::try_from(&matrix)?)
             .unwrap();
         sleep(Duration::from_micros(500));
     }

asusctl/src/anime_cli.rs

@@ -1,54 +1,4 @@
 use gumdrop::Options;
-use rog_aura::error::Error;
-use std::str::FromStr;
-
-#[derive(Copy, Clone, Debug)]
-pub enum AnimeStatusValue {
-    On,
-    Off,
-}
-impl FromStr for AnimeStatusValue {
-    type Err = Error;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        let s = s.to_lowercase();
-        match s.as_str() {
-            "on" => Ok(AnimeStatusValue::On),
-            "off" => Ok(AnimeStatusValue::Off),
-            _ => {
-                print!("Invalid argument, must be one of: on, off");
-                Err(Error::ParseAnime)
-            }
-        }
-    }
-}
-impl From<AnimeStatusValue> for bool {
-    fn from(value: AnimeStatusValue) -> Self {
-        match value {
-            AnimeStatusValue::On => true,
-            AnimeStatusValue::Off => false,
-        }
-    }
-}
-
-#[derive(Options)]
-pub struct AnimeLeds {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(
-        no_long,
-        required,
-        short = "b",
-        meta = "",
-        help = "set all leds brightness value"
-    )]
-    led_brightness: u8,
-}
-impl AnimeLeds {
-    pub fn led_brightness(&self) -> u8 {
-        self.led_brightness
-    }
-}
 
 #[derive(Options)]
 pub struct AnimeCommand {
@@ -56,21 +6,32 @@ pub struct AnimeCommand {
     pub help: bool,
     #[options(
         meta = "",
-        help = "turn on/off the panel (accept/reject write requests)"
+        help = "enable/disable the panel LEDs (does not erase last image)"
     )]
-    pub turn: Option<AnimeStatusValue>,
-    #[options(meta = "", help = "turn on/off the panel at boot (with Asus effect)")]
-    pub boot: Option<AnimeStatusValue>,
+    pub enable: Option<bool>,
+    #[options(
+        meta = "",
+        help = "enable/disable system animations (boot/sleep/shutdown)"
+    )]
+    pub boot_enable: Option<bool>,
+    #[options(meta = "", help = "set global AniMe brightness value")]
+    pub brightness: Option<f32>,
+    #[options(help = "clear the display")]
+    pub clear: bool,
     #[options(command)]
     pub command: Option<AnimeActions>,
 }
 
 #[derive(Options)]
 pub enum AnimeActions {
-    #[options(help = "change all leds brightness")]
-    Leds(AnimeLeds),
-    #[options(help = "display an image png")]
+    #[options(help = "display a PNG image")]
     Image(AnimeImage),
+    #[options(help = "display a diagonal/pixel-perfect PNG")]
+    PixelImage(AnimeImageDiagonal),
+    #[options(help = "display an animated GIF")]
+    Gif(AnimeGif),
+    #[options(help = "display an animated diagonal/pixel-perfect GIF")]
+    PixelGif(AnimeGifDiagonal),
 }
 
 #[derive(Options)]
@@ -90,3 +51,53 @@ pub struct AnimeImage {
     #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
     pub bright: f32,
 }
+
+#[derive(Options)]
+pub struct AnimeImageDiagonal {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "full path to the png to display")]
+    pub path: String,
+    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    pub bright: f32,
+}
+
+#[derive(Options)]
+pub struct AnimeGif {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "full path to the png to display")]
+    pub path: String,
+    #[options(meta = "", default = "1.0", help = "scale 1.0 == normal")]
+    pub scale: f32,
+    #[options(meta = "", default = "0.0", help = "x position (float)")]
+    pub x_pos: f32,
+    #[options(meta = "", default = "0.0", help = "y position (float)")]
+    pub y_pos: f32,
+    #[options(meta = "", default = "0.0", help = "the angle in radians")]
+    pub angle: f32,
+    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    pub bright: f32,
+    #[options(
+        meta = "",
+        default = "1",
+        help = "how many loops to play - 0 is infinite"
+    )]
+    pub loops: u32,
+}
+
+#[derive(Options)]
+pub struct AnimeGifDiagonal {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "full path to the png to display")]
+    pub path: String,
+    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    pub bright: f32,
+    #[options(
+        meta = "",
+        default = "1",
+        help = "how many loops to play - 0 is infinite"
+    )]
+    pub loops: u32,
+}

asusctl/src/aura_cli.rs

@@ -2,6 +2,70 @@ use gumdrop::Options;
 use rog_aura::{error::Error, AuraEffect, AuraModeNum, AuraZone, Colour, Direction, Speed};
 use std::str::FromStr;
 
+#[derive(Options)]
+pub struct LedPowerCommand1 {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "Control if LEDs enabled while awake <true/false>")]
+    pub awake: Option<bool>,
+    #[options(meta = "", help = "Use with awake option <true/false>")]
+    pub keyboard: Option<bool>,
+    #[options(meta = "", help = "Use with awake option <true/false>")]
+    pub lightbar: Option<bool>,
+    #[options(meta = "", help = "Control boot animations <true/false>")]
+    pub boot: Option<bool>,
+    #[options(meta = "", help = "Control suspend animations <true/false>")]
+    pub sleep: Option<bool>,
+}
+
+#[derive(Options)]
+pub struct LedPowerCommand2 {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(command)]
+    pub command: Option<SetAuraEnabled>,
+}
+
+#[derive(Options)]
+pub enum SetAuraEnabled {
+    /// Applies to both old and new models
+    #[options(help = "set <keyboard, logo, lightbar> to enabled while device is awake")]
+    Awake(AuraEnabled),
+    #[options(help = "set <keyboard, logo, lightbar> to enabled while the device is booting")]
+    Boot(AuraEnabled),
+    #[options(help = "set <keyboard, logo, lightbar> to animate while the device is suspended")]
+    Sleep(AuraEnabled),
+    #[options(help = "set <keyboard, logo, lightbar> to animate while the device is shutdown")]
+    Shutdown(AuraEnabled),
+}
+
+#[derive(Debug, Clone, Default, Options)]
+pub struct AuraEnabled {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "<true/false>")]
+    pub keyboard: Option<bool>,
+    #[options(meta = "", help = "<true/false>")]
+    pub logo: Option<bool>,
+    #[options(meta = "", help = "<true/false>")]
+    pub lightbar: Option<bool>,
+}
+
+// impl FromStr for AuraEnabled {
+//     type Err = Error;
+
+//     fn from_str(s: &str) -> Result<Self, Self::Err> {
+//         let s = s.to_lowercase();
+//         dbg!(s);
+//         Ok(Self {
+//             help: false,
+//             keyboard: None,
+//             logo: None,
+//             lightbar: None,
+//         })
+//     }
+// }
+
 #[derive(Options)]
 pub struct LedBrightness {
     level: Option<u32>,
@@ -50,7 +114,14 @@ pub struct SingleSpeed {
     help: bool,
     #[options(no_long, meta = "WORD", help = "set the speed: low, med, high")]
     pub speed: Speed,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
 }
+
 #[derive(Debug, Clone, Options, Default)]
 pub struct SingleSpeedDirection {
     #[options(help = "print help message")]
@@ -59,6 +130,12 @@ pub struct SingleSpeedDirection {
     pub direction: Direction,
     #[options(no_long, meta = "", help = "set the speed: low, med, high")]
     pub speed: Speed,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
 }
 
 #[derive(Debug, Clone, Default, Options)]
@@ -67,6 +144,12 @@ pub struct SingleColour {
     help: bool,
     #[options(no_long, meta = "", help = "set the RGB value e.g, ff00ff")]
     pub colour: Colour,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
 }
 
 #[derive(Debug, Clone, Default, Options)]
@@ -77,6 +160,12 @@ pub struct SingleColourSpeed {
     pub colour: Colour,
     #[options(no_long, meta = "", help = "set the speed: low, med, high")]
     pub speed: Speed,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
 }
 
 #[derive(Debug, Clone, Options, Default)]
@@ -89,10 +178,16 @@ pub struct TwoColourSpeed {
     pub colour2: Colour,
     #[options(no_long, meta = "", help = "set the speed: low, med, high")]
     pub speed: Speed,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
 }
 
 #[derive(Debug, Clone, Default, Options)]
-pub struct MultiColour {
+pub struct MultiZone {
     #[options(help = "print help message")]
     help: bool,
     #[options(short = "a", meta = "", help = "set the RGB value e.g, ff00ff")]
@@ -152,10 +247,6 @@ pub enum SetAuraBuiltin {
     Comet(SingleColour),
     #[options(help = "set a wide vertical line zooming from left")]
     Flash(SingleColour),
-    #[options(help = "4-zone multi-colour")]
-    MultiStatic(MultiColour),
-    #[options(help = "4-zone multi-colour breathing")]
-    MultiBreathe(MultiColourSpeed),
 }
 
 impl Default for SetAuraBuiltin {
@@ -168,6 +259,7 @@ impl From<&SingleColour> for AuraEffect {
     fn from(aura: &SingleColour) -> Self {
         Self {
             colour1: aura.colour,
+            zone: aura.zone,
             ..Default::default()
         }
     }
@@ -177,6 +269,7 @@ impl From<&SingleSpeed> for AuraEffect {
     fn from(aura: &SingleSpeed) -> Self {
         Self {
             speed: aura.speed,
+            zone: aura.zone,
             ..Default::default()
         }
     }
@@ -187,6 +280,7 @@ impl From<&SingleColourSpeed> for AuraEffect {
         Self {
             colour1: aura.colour,
             speed: aura.speed,
+            zone: aura.zone,
             ..Default::default()
         }
     }
@@ -197,6 +291,7 @@ impl From<&TwoColourSpeed> for AuraEffect {
         Self {
             colour1: aura.colour,
             colour2: aura.colour2,
+            zone: aura.zone,
             ..Default::default()
         }
     }
@@ -207,6 +302,7 @@ impl From<&SingleSpeedDirection> for AuraEffect {
         Self {
             speed: aura.speed,
             direction: aura.direction,
+            zone: aura.zone,
             ..Default::default()
         }
     }
@@ -275,55 +371,6 @@ impl From<&SetAuraBuiltin> for AuraEffect {
                 data.mode = AuraModeNum::Flash;
                 data
             }
-            _ => AuraEffect::default(),
         }
     }
 }
-
-impl From<&SetAuraBuiltin> for Vec<AuraEffect> {
-    fn from(aura: &SetAuraBuiltin) -> Vec<AuraEffect> {
-        let mut zones = vec![AuraEffect::default(); 4];
-        match aura {
-            SetAuraBuiltin::MultiStatic(data) => {
-                zones[0].mode = AuraModeNum::Static;
-                zones[0].zone = AuraZone::One;
-                zones[0].colour1 = data.colour1;
-
-                zones[1].mode = AuraModeNum::Static;
-                zones[1].zone = AuraZone::Two;
-                zones[1].colour1 = data.colour2;
-
-                zones[2].mode = AuraModeNum::Static;
-                zones[2].zone = AuraZone::Three;
-                zones[2].colour1 = data.colour3;
-
-                zones[3].mode = AuraModeNum::Static;
-                zones[3].zone = AuraZone::Four;
-                zones[3].colour1 = data.colour4;
-            }
-            SetAuraBuiltin::MultiBreathe(data) => {
-                zones[0].mode = AuraModeNum::Breathe;
-                zones[0].zone = AuraZone::One;
-                zones[0].colour1 = data.colour1;
-                zones[0].speed = data.speed;
-
-                zones[1].mode = AuraModeNum::Breathe;
-                zones[1].zone = AuraZone::Two;
-                zones[1].colour1 = data.colour2;
-                zones[1].speed = data.speed;
-
-                zones[2].mode = AuraModeNum::Breathe;
-                zones[2].zone = AuraZone::Three;
-                zones[2].colour1 = data.colour3;
-                zones[2].speed = data.speed;
-
-                zones[3].mode = AuraModeNum::Breathe;
-                zones[3].zone = AuraZone::Four;
-                zones[3].colour1 = data.colour4;
-                zones[3].speed = data.speed;
-            }
-            _ => {}
-        }
-        zones
-    }
-}

asusctl/src/cli_opts.rs

@@ -1,10 +1,9 @@
 use crate::{
     anime_cli::AnimeCommand,
-    aura_cli::{LedBrightness, SetAuraBuiltin},
-    profiles_cli::ProfileCommand,
+    aura_cli::{LedBrightness, LedPowerCommand1, LedPowerCommand2, SetAuraBuiltin},
+    profiles_cli::{FanCurveCommand, ProfileCommand},
 };
 use gumdrop::Options;
-use supergfxctl::gfx_vendors::GfxVendors;
 
 #[derive(Default, Options)]
 pub struct CliStart {
@@ -20,7 +19,7 @@ pub struct CliStart {
     pub next_kbd_bright: bool,
     #[options(help = "Toggle to previous keyboard brightness")]
     pub prev_kbd_bright: bool,
-    #[options(meta = "", help = "<20-100>")]
+    #[options(meta = "", help = "Set your battery charge limit <20-100>")]
     pub chg_limit: Option<u8>,
     #[options(command)]
     pub command: Option<CliCommand>,
@@ -30,9 +29,15 @@ pub struct CliStart {
 pub enum CliCommand {
     #[options(help = "Set the keyboard lighting from built-in modes")]
     LedMode(LedModeCommand),
-    #[options(help = "Create and configure profiles")]
+    #[options(help = "Set the LED power states")]
+    LedPow1(LedPowerCommand1),
+    #[options(help = "Set the LED power states")]
+    LedPow2(LedPowerCommand2),
+    #[options(help = "Set or select platform_profile")]
     Profile(ProfileCommand),
-    #[options(help = "Set the graphics mode")]
+    #[options(help = "Set, select, or modify fan curves if supported")]
+    FanCurve(FanCurveCommand),
+    #[options(help = "Set the graphics mode (obsoleted by supergfxctl)")]
     Graphics(GraphicsCommand),
     #[options(name = "anime", help = "Manage AniMe Matrix")]
     Anime(AnimeCommand),
@@ -48,16 +53,6 @@ pub struct LedModeCommand {
     pub next_mode: bool,
     #[options(help = "switch to previous aura mode")]
     pub prev_mode: bool,
-    #[options(
-        meta = "",
-        help = "set the keyboard LED to enabled while the device is awake"
-    )]
-    pub awake_enable: Option<bool>,
-    #[options(
-        meta = "",
-        help = "set the keyboard LED suspend animation to enabled while the device is suspended"
-    )]
-    pub sleep_enable: Option<bool>,
     #[options(command)]
     pub command: Option<SetAuraBuiltin>,
 }
@@ -66,17 +61,6 @@ pub struct LedModeCommand {
 pub struct GraphicsCommand {
     #[options(help = "print help message")]
     pub help: bool,
-    #[options(
-        meta = "",
-        help = "Set graphics mode: <nvidia, hybrid, compute, integrated>"
-    )]
-    pub mode: Option<GfxVendors>,
-    #[options(help = "Get the current mode")]
-    pub get: bool,
-    #[options(help = "Get the current power status")]
-    pub pow: bool,
-    #[options(help = "Do not ask for confirmation")]
-    pub force: bool,
 }
 
 #[derive(Options, Debug)]
@@ -85,18 +69,29 @@ pub struct BiosCommand {
     pub help: bool,
     #[options(
         meta = "",
+        short = "S",
         no_long,
         help = "set bios POST sound: asusctl -p <true/false>"
     )]
     pub post_sound_set: Option<bool>,
-    #[options(no_long, help = "read bios POST sound")]
+    #[options(no_long, short = "s", help = "read bios POST sound")]
     pub post_sound_get: bool,
     #[options(
         meta = "",
+        short = "D",
         no_long,
         help = "activate dGPU dedicated/G-Sync: asusctl -d <true/false>, reboot required"
     )]
     pub dedicated_gfx_set: Option<bool>,
-    #[options(no_long, help = "get GPU mode")]
+    #[options(no_long, short = "d", help = "get GPU mode")]
     pub dedicated_gfx_get: bool,
+    #[options(
+        meta = "",
+        short = "O",
+        no_long,
+        help = "Set device panel overdrive <true/false>"
+    )]
+    pub panel_overdrive_set: Option<bool>,
+    #[options(no_long, short = "o", help = "get panel overdrive")]
+    pub panel_overdrive_get: bool,
 }

asusctl/src/main.rs

@@ -1,32 +1,32 @@
-mod anime_cli;
-mod aura_cli;
-mod cli_opts;
-mod profiles_cli;
+use std::convert::TryFrom;
+use std::process::Command;
+use std::thread::sleep;
+use std::{env::args, path::Path};
 
-use crate::aura_cli::{LedBrightness, SetAuraBuiltin};
-use crate::cli_opts::*;
-use anime_cli::{AnimeActions, AnimeCommand};
+use aura_cli::{LedPowerCommand1, LedPowerCommand2};
 use gumdrop::{Opt, Options};
-use profiles_cli::ProfileCommand;
-use rog_anime::{AnimeDataBuffer, AnimeImage, Vec2, ANIME_DATA_LEN};
+
+use anime_cli::{AnimeActions, AnimeCommand};
+use profiles_cli::{FanCurveCommand, ProfileCommand};
+use rog_anime::usb::get_anime_type;
+use rog_anime::{AnimTime, AnimeDataBuffer, AnimeDiagonal, AnimeGif, AnimeImage, Vec2};
+use rog_aura::usb::{AuraDev1866, AuraDev19b6, AuraPowerDev};
 use rog_aura::{self, AuraEffect};
-use rog_dbus::RogDbusClient;
+use rog_dbus::RogDbusClientBlocking;
+use rog_profiles::error::ProfileError;
 use rog_supported::SupportedFunctions;
 use rog_supported::{
     AnimeSupportedFunctions, LedSupportedFunctions, PlatformProfileFunctions,
     RogBiosSupportedFunctions,
 };
-use std::{env::args, path::Path, sync::mpsc::channel};
-use supergfxctl::{
-    gfx_vendors::GfxRequiredUserAction,
-    special::{get_asus_gsync_gfx_mode, has_asus_gsync_gfx_mode},
-    zbus_proxy::GfxProxy,
-};
-use zbus::Connection;
 
-const PLEASE: &str =
-    "Please use `systemctl status asusd` and `journalctl -b -u asusd` for more information";
-const CONFIG_ADVICE: &str = "A config file need to be removed so a new one can be generated";
+use crate::aura_cli::LedBrightness;
+use crate::cli_opts::*;
+
+mod anime_cli;
+mod aura_cli;
+mod cli_opts;
+mod profiles_cli;
 
 fn main() -> Result<(), Box<dyn std::error::Error>> {
     let args: Vec<String> = args().skip(1).collect();
@@ -49,50 +49,47 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
         }
     }
 
-    let (dbus, _) = RogDbusClient::new().map_err(|e| {
-        println!("\nIs asusd running?\n");
-        println!("{}", PLEASE);
-        println!("{}\n", CONFIG_ADVICE);
-        e
-    })?;
+    let (dbus, _) = RogDbusClientBlocking::new()
+        .map_err(|e| {
+            print_error_help(Box::new(e), None);
+            std::process::exit(3);
+        })
+        .unwrap();
 
     let supported = dbus
         .proxies()
         .supported()
-        .get_supported_functions()
+        .supported_functions()
         .map_err(|e| {
-            println!("\nIs asusd running?\n");
-            println!("{}", PLEASE);
-            println!("{}\n", CONFIG_ADVICE);
-            e
-        })?;
+            print_error_help(Box::new(e), None);
+            std::process::exit(4);
+        })
+        .unwrap();
 
     if parsed.version {
         print_versions();
         println!();
         print_laptop_info();
-        println!("{}\n", PLEASE);
         return Ok(());
     }
 
     if let Err(err) = do_parsed(&parsed, &supported, &dbus) {
-        print_error_help(err, &supported);
+        print_error_help(err, Some(&supported));
     }
 
     Ok(())
 }
 
-fn print_error_help(err: Box<dyn std::error::Error>, supported: &SupportedFunctions) {
-    println!("Error: {}\n", err);
+fn print_error_help(err: Box<dyn std::error::Error>, supported: Option<&SupportedFunctions>) {
+    check_service("asusd");
+    println!("\nError: {}\n", err);
     print_versions();
     println!();
     print_laptop_info();
-    println!();
-    println!("Supported laptop functions:\n\n{}", supported);
-    println!();
-    println!("{}", PLEASE);
-    println!("The above may give some indication that an option is not supported");
-    println!("or that a config file must be removed or fixed");
+    if let Some(supported) = supported {
+        println!();
+        println!("Supported laptop functions:\n\n{}", supported);
+    }
 }
 
 fn print_versions() {
@@ -105,7 +102,6 @@ fn print_versions() {
     println!("     rog-dbus v{}", rog_dbus::VERSION);
     println!(" rog-profiles v{}", rog_profiles::VERSION);
     println!("rog-supported v{}", rog_supported::VERSION);
-    println!("  supergfxctl v{}", supergfxctl::VERSION);
 }
 
 fn print_laptop_info() {
@@ -117,15 +113,37 @@ fn print_laptop_info() {
     println!("Board name: {}", board_name.trim());
 }
 
+fn check_service(name: &str) -> bool {
+    if name != "asusd" && !check_systemd_unit_enabled(name) {
+        println!(
+            "\n\x1b[0;31m{} is not enabled, enable it with `systemctl enable {}\x1b[0m",
+            name, name
+        );
+        return true;
+    } else if !check_systemd_unit_active(name) {
+        println!(
+            "\n\x1b[0;31m{} is not running, start it with `systemctl start {}\x1b[0m",
+            name, name
+        );
+        return true;
+    }
+    false
+}
+
 fn do_parsed(
     parsed: &CliStart,
     supported: &SupportedFunctions,
-    dbus: &RogDbusClient,
+    dbus: &RogDbusClientBlocking,
 ) -> Result<(), Box<dyn std::error::Error>> {
     match &parsed.command {
         Some(CliCommand::LedMode(mode)) => handle_led_mode(dbus, &supported.keyboard_led, mode)?,
+        Some(CliCommand::LedPow1(pow)) => handle_led_power1(dbus, &supported.keyboard_led, pow)?,
+        Some(CliCommand::LedPow2(pow)) => handle_led_power2(dbus, &supported.keyboard_led, pow)?,
         Some(CliCommand::Profile(cmd)) => handle_profile(dbus, &supported.platform_profile, cmd)?,
-        Some(CliCommand::Graphics(cmd)) => do_gfx(cmd)?,
+        Some(CliCommand::FanCurve(cmd)) => {
+            handle_fan_curve(dbus, &supported.platform_profile, cmd)?
+        }
+        Some(CliCommand::Graphics(_)) => do_gfx()?,
         Some(CliCommand::Anime(cmd)) => handle_anime(dbus, &supported.anime_ctrl, cmd)?,
         Some(CliCommand::Bios(cmd)) => handle_bios_option(dbus, &supported.rog_bios_ctrl, cmd)?,
         None => {
@@ -139,8 +157,27 @@ fn do_parsed(
                 println!("{}", CliStart::usage());
                 println!();
                 if let Some(cmdlist) = CliStart::command_list() {
-                    println!("{}", cmdlist);
+                    let commands: Vec<String> = cmdlist.lines().map(|s| s.to_string()).collect();
+                    for command in commands.iter().filter(|command| {
+                        if supported.keyboard_led.prod_id != "1866"
+                            && command.trim().starts_with("led-pow-1")
+                        {
+                            return false;
+                        }
+                        if supported.keyboard_led.prod_id != "19b6"
+                            && command.trim().starts_with("led-pow-2")
+                        {
+                            return false;
+                        }
+                        true
+                    }) {
+                        println!("{}", command);
+                    }
                 }
+
+                println!("\nExtra help can be requested on any command or subcommand:");
+                println!(" asusctl led-mode --help");
+                println!(" asusctl led-mode static --help");
             }
         }
     }
@@ -148,13 +185,13 @@ fn do_parsed(
     if let Some(brightness) = &parsed.kbd_bright {
         match brightness.level() {
             None => {
-                let level = dbus.proxies().led().get_led_brightness()?;
-                println!("Current keyboard led brightness: {}", level.to_string());
+                let level = dbus.proxies().led().led_brightness()?;
+                println!("Current keyboard led brightness: {}", level);
             }
             Some(level) => dbus
                 .proxies()
                 .led()
-                .set_led_brightness(<rog_aura::LedBrightness>::from(level))?,
+                .set_brightness(<rog_aura::LedBrightness>::from(level))?,
         }
     }
 
@@ -171,103 +208,54 @@ fn do_parsed(
     }
 
     if let Some(chg_limit) = parsed.chg_limit {
-        dbus.proxies().charge().write_limit(chg_limit)?;
+        dbus.proxies().charge().set_limit(chg_limit)?;
     }
 
     Ok(())
 }
 
-fn do_gfx(command: &GraphicsCommand) -> Result<(), Box<dyn std::error::Error>> {
-    if command.mode.is_none() && !command.get && !command.pow && !command.force || command.help {
-        println!("{}", command.self_usage());
-    }
-
-    let conn = Connection::new_system()?;
-    let proxy = GfxProxy::new(&conn)?;
-
-    let (tx, rx) = channel();
-    proxy.connect_notify_action(tx)?;
-
-    if let Some(mode) = command.mode {
-        if has_asus_gsync_gfx_mode() && get_asus_gsync_gfx_mode()? == 1 {
-            println!("You can not change modes until you turn dedicated/G-Sync off and reboot");
-            std::process::exit(-1);
-        }
-
-        println!("If anything fails check `journalctl -b -u asusd`\n");
-
-        proxy.gfx_write_mode(&mode).map_err(|err|{
-            println!("Graphics mode change error. You may be in an invalid state.");
-            println!("Check mode with `asusctl graphics -g` and switch to opposite\nmode to correct it, e.g: if integrated, switch to hybrid, or if nvidia, switch to integrated.\n");
-            err
-        })?;
-
-        loop {
-            proxy.next_signal()?;
-
-            if let Ok(res) = rx.try_recv() {
-                match res {
-                    GfxRequiredUserAction::Integrated => {
-                        println!(
-                            "You must change to Integrated before you can change to {}",
-                            <&str>::from(mode)
-                        );
-                    }
-                    GfxRequiredUserAction::Logout | GfxRequiredUserAction::Reboot => {
-                        println!(
-                            "Graphics mode changed to {}. User action required is: {}",
-                            <&str>::from(mode),
-                            <&str>::from(&res)
-                        );
-                    }
-                    GfxRequiredUserAction::None => {
-                        println!("Graphics mode changed to {}", <&str>::from(mode));
-                    }
-                }
-            }
-            std::process::exit(0)
-        }
-    }
-
-    if command.get {
-        let res = proxy.gfx_get_mode()?;
-        println!("Current graphics mode: {}", <&str>::from(res));
-    }
-    if command.pow {
-        let res = proxy.gfx_get_pwr()?;
-        println!("Current power status: {}", <&str>::from(&res));
-    }
-
+fn do_gfx() -> Result<(), Box<dyn std::error::Error>> {
+    println!("Please use supergfxctl for graphics switching. supergfxctl is the result of making asusctl graphics switching generic so all laptops can use it");
+    println!("This command will be removed in future");
     Ok(())
 }
 
 fn handle_anime(
-    dbus: &RogDbusClient,
+    dbus: &RogDbusClientBlocking,
     _supported: &AnimeSupportedFunctions,
     cmd: &AnimeCommand,
 ) -> Result<(), Box<dyn std::error::Error>> {
-    if (cmd.command.is_none() && cmd.boot.is_none() && cmd.turn.is_none()) || cmd.help {
+    if (cmd.command.is_none()
+        && cmd.enable.is_none()
+        && cmd.boot_enable.is_none()
+        && cmd.brightness.is_none())
+        || cmd.help
+    {
         println!("Missing arg or command\n\n{}", cmd.self_usage());
         if let Some(lst) = cmd.self_command_list() {
             println!("\n{}", lst);
         }
     }
-    if let Some(anime_turn) = cmd.turn {
-        dbus.proxies().anime().set_led_power(anime_turn.into())?
+    if let Some(anime_turn) = cmd.enable {
+        dbus.proxies().anime().set_on_off(anime_turn)?
     }
-    if let Some(anime_boot) = cmd.boot {
-        dbus.proxies()
-            .anime()
-            .set_system_animations(anime_boot.into())?
+    if let Some(anime_boot) = cmd.boot_enable {
+        dbus.proxies().anime().set_boot_on_off(anime_boot)?
     }
+    if let Some(bright) = cmd.brightness {
+        verify_brightness(bright);
+        dbus.proxies().anime().set_brightness(bright)?
+    }
+    if cmd.clear {
+        let anime_type = get_anime_type()?;
+        let data = vec![0u8; anime_type.data_length()];
+        let tmp = AnimeDataBuffer::from_vec(anime_type, data)?;
+        dbus.proxies().anime().write(tmp)?;
+    }
+
     if let Some(action) = cmd.command.as_ref() {
+        let anime_type = get_anime_type()?;
         match action {
-            AnimeActions::Leds(anime_leds) => {
-                let data = AnimeDataBuffer::from_vec(
-                    [anime_leds.led_brightness(); ANIME_DATA_LEN].to_vec(),
-                );
-                dbus.proxies().anime().write(data)?;
-            }
             AnimeActions::Image(image) => {
                 if image.help_requested() || image.path.is_empty() {
                     println!("Missing arg or command\n\n{}", image.self_usage());
@@ -276,6 +264,7 @@ fn handle_anime(
                     }
                     std::process::exit(1);
                 }
+                verify_brightness(image.bright);
 
                 let matrix = AnimeImage::from_png(
                     Path::new(&image.path),
@@ -283,28 +272,120 @@ fn handle_anime(
                     image.angle,
                     Vec2::new(image.x_pos, image.y_pos),
                     image.bright,
+                    anime_type,
                 )?;
 
                 dbus.proxies()
                     .anime()
-                    .write(<AnimeDataBuffer>::from(&matrix))?;
+                    .write(<AnimeDataBuffer>::try_from(&matrix)?)?;
+            }
+            AnimeActions::PixelImage(image) => {
+                if image.help_requested() || image.path.is_empty() {
+                    println!("Missing arg or command\n\n{}", image.self_usage());
+                    if let Some(lst) = image.self_command_list() {
+                        println!("\n{}", lst);
+                    }
+                    std::process::exit(1);
+                }
+                verify_brightness(image.bright);
+
+                let matrix = AnimeDiagonal::from_png(
+                    Path::new(&image.path),
+                    None,
+                    image.bright,
+                    anime_type,
+                )?;
+
+                dbus.proxies()
+                    .anime()
+                    .write(matrix.into_data_buffer(anime_type)?)?;
+            }
+            AnimeActions::Gif(gif) => {
+                if gif.help_requested() || gif.path.is_empty() {
+                    println!("Missing arg or command\n\n{}", gif.self_usage());
+                    if let Some(lst) = gif.self_command_list() {
+                        println!("\n{}", lst);
+                    }
+                    std::process::exit(1);
+                }
+                verify_brightness(gif.bright);
+
+                let matrix = AnimeGif::from_gif(
+                    Path::new(&gif.path),
+                    gif.scale,
+                    gif.angle,
+                    Vec2::new(gif.x_pos, gif.y_pos),
+                    AnimTime::Count(1),
+                    gif.bright,
+                    anime_type,
+                )?;
+
+                let mut loops = gif.loops as i32;
+                loop {
+                    for frame in matrix.frames() {
+                        dbus.proxies().anime().write(frame.frame().clone())?;
+                        sleep(frame.delay());
+                    }
+                    if loops >= 0 {
+                        loops -= 1;
+                    }
+                    if loops == 0 {
+                        break;
+                    }
+                }
+            }
+            AnimeActions::PixelGif(gif) => {
+                if gif.help_requested() || gif.path.is_empty() {
+                    println!("Missing arg or command\n\n{}", gif.self_usage());
+                    if let Some(lst) = gif.self_command_list() {
+                        println!("\n{}", lst);
+                    }
+                    std::process::exit(1);
+                }
+                verify_brightness(gif.bright);
+
+                let matrix = AnimeGif::from_diagonal_gif(
+                    Path::new(&gif.path),
+                    AnimTime::Count(1),
+                    gif.bright,
+                    anime_type,
+                )?;
+
+                let mut loops = gif.loops as i32;
+                loop {
+                    for frame in matrix.frames() {
+                        dbus.proxies().anime().write(frame.frame().clone())?;
+                        sleep(frame.delay());
+                    }
+                    if loops >= 0 {
+                        loops -= 1;
+                    }
+                    if loops == 0 {
+                        break;
+                    }
+                }
             }
         }
     }
     Ok(())
 }
 
+fn verify_brightness(brightness: f32) {
+    if brightness < 0.0 || brightness > 1.0 {
+        println!(
+            "Image and global brightness must be between 0.0 and 1.0 (inclusive), was {}",
+            brightness
+        );
+        std::process::exit(1);
+    }
+}
+
 fn handle_led_mode(
-    dbus: &RogDbusClient,
+    dbus: &RogDbusClientBlocking,
     supported: &LedSupportedFunctions,
     mode: &LedModeCommand,
 ) -> Result<(), Box<dyn std::error::Error>> {
-    if mode.command.is_none()
-        && !mode.prev_mode
-        && !mode.next_mode
-        && mode.sleep_enable.is_none()
-        && mode.awake_enable.is_none()
-    {
+    if mode.command.is_none() && !mode.prev_mode && !mode.next_mode {
         if !mode.help {
             println!("Missing arg or command\n");
         }
@@ -315,11 +396,14 @@ fn handle_led_mode(
             let commands: Vec<String> = cmdlist.lines().map(|s| s.to_string()).collect();
             for command in commands.iter().filter(|command| {
                 for mode in &supported.stock_led_modes {
-                    if command.contains(&<&str>::from(mode).to_lowercase()) {
+                    if command
+                        .trim()
+                        .starts_with(&<&str>::from(mode).to_lowercase())
+                    {
                         return true;
                     }
                 }
-                if supported.multizone_led_mode {
+                if !supported.multizone_led_mode.is_empty() && command.trim().starts_with("multi") {
                     return true;
                 }
                 false
@@ -345,74 +429,264 @@ fn handle_led_mode(
             println!("{}", mode.self_usage());
             return Ok(());
         }
-        match mode {
-            SetAuraBuiltin::MultiStatic(_) | SetAuraBuiltin::MultiBreathe(_) => {
-                let zones = <Vec<AuraEffect>>::from(mode);
-                for eff in zones {
-                    dbus.proxies().led().set_led_mode(&eff)?
+        dbus.proxies()
+            .led()
+            .set_led_mode(&<AuraEffect>::from(mode))?;
+    }
+
+    Ok(())
+}
+
+fn handle_led_power1(
+    dbus: &RogDbusClientBlocking,
+    supported: &LedSupportedFunctions,
+    power: &LedPowerCommand1,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if power.awake.is_none()
+        && power.sleep.is_none()
+        && power.boot.is_none()
+        && power.keyboard.is_none()
+        && power.lightbar.is_none()
+    {
+        if !power.help {
+            println!("Missing arg or command\n");
+        }
+        println!("{}\n", power.self_usage());
+        return Ok(());
+    }
+
+    if supported.prod_id != "1866" {
+        println!("These options are for keyboards of product ID 0x1866 only");
+        return Ok(());
+    }
+
+    let mut enabled: Vec<AuraDev1866> = Vec::new();
+    let mut disabled: Vec<AuraDev1866> = Vec::new();
+
+    let mut check = |e: Option<bool>, a: AuraDev1866| {
+        if let Some(arg) = e {
+            if arg {
+                enabled.push(a);
+            } else {
+                disabled.push(a);
+            }
+        }
+    };
+
+    check(power.awake, AuraDev1866::Awake);
+    check(power.boot, AuraDev1866::Boot);
+    check(power.sleep, AuraDev1866::Sleep);
+    check(power.keyboard, AuraDev1866::Keyboard);
+    check(power.lightbar, AuraDev1866::Lightbar);
+
+    let data = AuraPowerDev {
+        x1866: enabled,
+        x19b6: vec![],
+    };
+    dbus.proxies().led().set_leds_power(data, true)?;
+
+    let data = AuraPowerDev {
+        x1866: disabled,
+        x19b6: vec![],
+    };
+    dbus.proxies().led().set_leds_power(data, false)?;
+
+    Ok(())
+}
+
+fn handle_led_power2(
+    dbus: &RogDbusClientBlocking,
+    supported: &LedSupportedFunctions,
+    power: &LedPowerCommand2,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if power.command().is_none() {
+        if !power.help {
+            println!("Missing arg or command\n");
+        }
+        println!("{}\n", power.self_usage());
+        println!("Commands available");
+
+        if let Some(cmdlist) = LedPowerCommand2::command_list() {
+            let commands: Vec<String> = cmdlist.lines().map(|s| s.to_string()).collect();
+            for command in commands.iter() {
+                println!("{}", command);
+            }
+        }
+
+        println!("\nHelp can also be requested on commands, e.g: boot --help");
+        return Ok(());
+    }
+
+    if let Some(pow) = power.command.as_ref() {
+        if pow.help_requested() {
+            println!("{}", pow.self_usage());
+            return Ok(());
+        }
+
+        if supported.prod_id == "1866" {
+            println!("This option does not apply to keyboards with product ID 0x1866")
+        }
+
+        let mut enabled: Vec<AuraDev19b6> = Vec::new();
+        let mut disabled: Vec<AuraDev19b6> = Vec::new();
+        let mut check = |e: Option<bool>, a: AuraDev19b6| {
+            if let Some(arg) = e {
+                if arg {
+                    enabled.push(a);
+                } else {
+                    disabled.push(a);
                 }
             }
-            _ => dbus
-                .proxies()
-                .led()
-                .set_led_mode(&<AuraEffect>::from(mode))?,
+        };
+
+        match pow {
+            aura_cli::SetAuraEnabled::Boot(arg) => {
+                check(arg.keyboard, AuraDev19b6::BootKeyb);
+                check(arg.logo, AuraDev19b6::BootLogo);
+                check(arg.lightbar, AuraDev19b6::BootBar);
+            }
+            aura_cli::SetAuraEnabled::Sleep(arg) => {
+                check(arg.keyboard, AuraDev19b6::SleepKeyb);
+                check(arg.logo, AuraDev19b6::SleepLogo);
+                check(arg.lightbar, AuraDev19b6::SleepBar);
+            }
+            aura_cli::SetAuraEnabled::Awake(arg) => {
+                check(arg.keyboard, AuraDev19b6::AwakeKeyb);
+                check(arg.logo, AuraDev19b6::AwakeLogo);
+                check(arg.lightbar, AuraDev19b6::AwakeBar);
+            }
+            aura_cli::SetAuraEnabled::Shutdown(arg) => {
+                check(arg.keyboard, AuraDev19b6::ShutdownKeyb);
+                check(arg.logo, AuraDev19b6::ShutdownLogo);
+                check(arg.lightbar, AuraDev19b6::ShutdownBar);
+            }
         }
-    }
 
-    if let Some(enable) = mode.awake_enable {
-        dbus.proxies().led().set_awake_enabled(enable)?;
-    }
+        if !enabled.is_empty() {
+            let data = AuraPowerDev {
+                x1866: vec![],
+                x19b6: enabled,
+            };
+            dbus.proxies().led().set_leds_power(data, true)?;
+        }
 
-    if let Some(enable) = mode.sleep_enable {
-        dbus.proxies().led().set_sleep_enabled(enable)?;
+        if !disabled.is_empty() {
+            let data = AuraPowerDev {
+                x1866: vec![],
+                x19b6: disabled,
+            };
+            dbus.proxies().led().set_leds_power(data, false)?;
+        }
     }
 
     Ok(())
 }
 
 fn handle_profile(
-    dbus: &RogDbusClient,
+    dbus: &RogDbusClientBlocking,
     supported: &PlatformProfileFunctions,
     cmd: &ProfileCommand,
 ) -> Result<(), Box<dyn std::error::Error>> {
-    println!("Warning: Profiles should work fine but now depend on power-profiles-daemon v0.9+");
-    println!("Warning: Fan-curve support is coming in a 4.1.x release");
-    if !cmd.next && !cmd.list {
+    if !supported.platform_profile {
+        println!("Profiles not supported by either this kernel or by the laptop.");
+        return Err(ProfileError::NotSupported.into());
+    }
+
+    if !cmd.next && !cmd.list && cmd.profile_set.is_none() && !cmd.profile_get {
         if !cmd.help {
             println!("Missing arg or command\n");
         }
-        let usage: Vec<String> = ProfileCommand::usage()
-            .lines()
-            .map(|s| s.to_string())
-            .collect();
-        for line in usage
-            .iter()
-            .filter(|line| !line.contains("--curve") || supported.fan_curves)
-        {
-            println!("{}", line);
-        }
+        println!("{}", ProfileCommand::usage());
 
         if let Some(lst) = cmd.self_command_list() {
             println!("\n{}", lst);
         }
-
-        // println!("Note: turbo, frequency, fan preset and fan curve options will apply to");
-        // println!("      to the currently active profile unless a profile name is specified");
         std::process::exit(1);
     }
 
     if cmd.next {
         dbus.proxies().profile().next_profile()?;
+    } else if let Some(profile) = cmd.profile_set {
+        dbus.proxies().profile().set_active_profile(profile)?;
     }
+
     if cmd.list {
         let res = dbus.proxies().profile().profiles()?;
         res.iter().for_each(|p| println!("{:?}", p));
     }
+
+    if cmd.profile_get {
+        let res = dbus.proxies().profile().active_profile()?;
+        println!("Active profile is {:?}", res);
+    }
+
+    Ok(())
+}
+
+fn handle_fan_curve(
+    dbus: &RogDbusClientBlocking,
+    supported: &PlatformProfileFunctions,
+    cmd: &FanCurveCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if !supported.fan_curves {
+        println!("Fan-curves not supported by either this kernel or by the laptop.");
+        println!("This requires kernel 5.17 or the fan curve patch listed in the readme.");
+        return Err(ProfileError::NotSupported.into());
+    }
+
+    if !cmd.get_enabled && !cmd.default && cmd.mod_profile.is_none() {
+        if !cmd.help {
+            println!("Missing arg or command\n");
+        }
+        println!("{}", FanCurveCommand::usage());
+
+        if let Some(lst) = cmd.self_command_list() {
+            println!("\n{}", lst);
+        }
+        std::process::exit(1);
+    }
+
+    if (cmd.enabled.is_some() || cmd.fan.is_some() || cmd.data.is_some())
+        && cmd.mod_profile.is_none()
+    {
+        println!("--enabled, --fan, and --data options require --mod-profile");
+        std::process::exit(666);
+    }
+
+    if cmd.get_enabled {
+        let res = dbus.proxies().profile().enabled_fan_profiles()?;
+        println!("{:?}", res);
+    }
+
+    if cmd.default {
+        dbus.proxies().profile().set_active_curve_to_defaults()?;
+    }
+
+    if let Some(profile) = cmd.mod_profile {
+        if cmd.enabled.is_none() && cmd.data.is_none() {
+            let data = dbus.proxies().profile().fan_curve_data(profile)?;
+            let data = toml::to_string(&data)?;
+            println!("\nFan curves for {:?}\n\n{}", profile, data);
+        }
+
+        if let Some(enabled) = cmd.enabled {
+            dbus.proxies()
+                .profile()
+                .set_fan_curve_enabled(profile, enabled)?;
+        }
+
+        if let Some(mut curve) = cmd.data.clone() {
+            let fan = cmd.fan.unwrap_or_default();
+            curve.set_fan(fan);
+            dbus.proxies().profile().set_fan_curve(profile, curve)?;
+        }
+    }
+
     Ok(())
 }
 
 fn handle_bios_option(
-    dbus: &RogDbusClient,
+    dbus: &RogDbusClientBlocking,
     supported: &RogBiosSupportedFunctions,
     cmd: &BiosCommand,
 ) -> Result<(), Box<dyn std::error::Error>> {
@@ -420,7 +694,9 @@ fn handle_bios_option(
         if (cmd.dedicated_gfx_set.is_none()
             && !cmd.dedicated_gfx_get
             && cmd.post_sound_set.is_none()
-            && !cmd.post_sound_get)
+            && !cmd.post_sound_get
+            && cmd.panel_overdrive_set.is_none()
+            && !cmd.panel_overdrive_get)
             || cmd.help
         {
             println!("Missing arg or command\n");
@@ -431,23 +707,25 @@ fn handle_bios_option(
                 .collect();
 
             for line in usage.iter().filter(|line| {
-                !line.contains("sound") && !supported.post_sound_toggle
-                    || !line.contains("GPU") && !supported.dedicated_gfx_toggle
+                line.contains("sound") && supported.post_sound
+                    || line.contains("GPU") && supported.dedicated_gfx
+                    || line.contains("panel") && supported.panel_overdrive
             }) {
                 println!("{}", line);
             }
         }
 
         if let Some(opt) = cmd.post_sound_set {
-            dbus.proxies().rog_bios().set_post_sound(opt)?;
+            dbus.proxies().rog_bios().set_post_boot_sound(opt)?;
         }
         if cmd.post_sound_get {
-            let res = dbus.proxies().rog_bios().get_post_sound()? == 1;
+            let res = dbus.proxies().rog_bios().post_boot_sound()? == 1;
             println!("Bios POST sound on: {}", res);
         }
+
         if let Some(opt) = cmd.dedicated_gfx_set {
             println!("Rebuilding initrd to include drivers");
-            dbus.proxies().rog_bios().set_dedicated_gfx(opt)?;
+            dbus.proxies().rog_bios().set_dedicated_graphic_mode(opt)?;
             println!("The mode change is not active until you reboot, on boot the bios will make the required change");
             if opt {
                 println!(
@@ -458,9 +736,41 @@ fn handle_bios_option(
             }
         }
         if cmd.dedicated_gfx_get {
-            let res = dbus.proxies().rog_bios().get_dedicated_gfx()? == 1;
+            let res = dbus.proxies().rog_bios().dedicated_graphic_mode()? == 1;
             println!("Bios dedicated GPU on: {}", res);
         }
+
+        if let Some(opt) = cmd.panel_overdrive_set {
+            dbus.proxies().rog_bios().set_panel_overdrive(opt)?;
+        }
+        if cmd.panel_overdrive_get {
+            let res = dbus.proxies().rog_bios().panel_overdrive()? == 1;
+            println!("Panel overdrive on: {}", res);
+        }
     }
     Ok(())
 }
+
+fn check_systemd_unit_active(name: &str) -> bool {
+    if let Ok(out) = Command::new("systemctl")
+        .arg("is-active")
+        .arg(name)
+        .output()
+    {
+        let buf = String::from_utf8_lossy(&out.stdout);
+        return !buf.contains("inactive") && !buf.contains("failed");
+    }
+    false
+}
+
+fn check_systemd_unit_enabled(name: &str) -> bool {
+    if let Ok(out) = Command::new("systemctl")
+        .arg("is-enabled")
+        .arg(name)
+        .output()
+    {
+        let buf = String::from_utf8_lossy(&out.stdout);
+        return buf.contains("enabled");
+    }
+    false
+}

asusctl/src/profiles_cli.rs

@@ -1,4 +1,5 @@
 use gumdrop::Options;
+use rog_profiles::{fan_curve_set::CurveData, FanCurvePU, Profile};
 
 #[derive(Debug, Clone, Options)]
 pub struct ProfileCommand {
@@ -8,4 +9,43 @@ pub struct ProfileCommand {
     pub next: bool,
     #[options(help = "list available profiles")]
     pub list: bool,
+
+    #[options(help = "get profile")]
+    pub profile_get: bool,
+    #[options(meta = "", help = "set the active profile")]
+    pub profile_set: Option<Profile>,
+}
+
+#[derive(Debug, Clone, Options)]
+pub struct FanCurveCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+
+    #[options(help = "get enabled fan profiles")]
+    pub get_enabled: bool,
+    #[options(help = "set the active profile's fan curve to default")]
+    pub default: bool,
+
+    #[options(
+        meta = "",
+        help = "profile to modify fan-curve for. Shows data if no options provided"
+    )]
+    pub mod_profile: Option<Profile>,
+    #[options(
+        meta = "",
+        help = "enable or disable <true/false> fan curve. `mod-profile` required"
+    )]
+    pub enabled: Option<bool>,
+    #[options(
+        meta = "",
+        help = "select fan <cpu/gpu> to modify. `mod-profile` required"
+    )]
+    pub fan: Option<FanCurvePU>,
+
+    #[options(
+        meta = "",
+        help = "data format = 30c:1%,49c:2%,59c:3%,69c:4%,79c:31%,89c:49%,99c:56%,109c:58%.
+                      `--mod-profile` required. If '%' is omitted the fan range is 0-255"
+    )]
+    pub data: Option<CurveData>,
 }

daemon-user/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "daemon-user"
-version = "1.2.0"
+version = "1.3.0"
 authors = ["Luke D Jones <luke@ljones.dev>"]
 edition = "2018"
 description = "Usermode daemon for user settings, anime, per-key lighting"
@@ -23,8 +23,10 @@ rog_anime = { path = "../rog-anime" }
 rog_dbus = { path = "../rog-dbus" }
 rog_supported = { path = "../rog-supported" }
 
-dirs = "3.0.1"
+dirs = "^4.0"
 
-zbus = "^1.9.1"
-zvariant = "^2.6"
-zvariant_derive = "^2.6"
+zbus = "^2.2"
+zvariant = "^3.0"
+zvariant_derive = "^3.0"
+
+smol = "^1.2"

daemon-user/src/ctrl_anime.rs

@@ -1,6 +1,6 @@
 use rog_anime::error::AnimeError;
 use rog_anime::{ActionData, ActionLoader, AnimTime, Fade, Sequences, Vec2};
-use rog_dbus::RogDbusClient;
+use rog_dbus::RogDbusClientBlocking;
 use serde_derive::{Deserialize, Serialize};
 use std::time::Duration;
 use std::{
@@ -66,14 +66,14 @@ pub enum TimeType {
 /// and a zbus server behind `Arc<Mutex<T>>`
 pub struct CtrlAnimeInner<'a> {
     sequences: Sequences,
-    client: RogDbusClient<'a>,
+    client: RogDbusClientBlocking<'a>,
     do_early_return: Arc<AtomicBool>,
 }
 
 impl<'a> CtrlAnimeInner<'static> {
     pub fn new(
         sequences: Sequences,
-        client: RogDbusClient<'static>,
+        client: RogDbusClientBlocking<'static>,
         do_early_return: Arc<AtomicBool>,
     ) -> Result<Self, Error> {
         Ok(Self {
@@ -91,12 +91,16 @@ impl<'a> CtrlAnimeInner<'static> {
         for action in self.sequences.iter() {
             match action {
                 ActionData::Animation(frames) => {
-                    rog_anime::run_animation(frames, self.do_early_return.clone(), &|output| {
+                    rog_anime::run_animation(frames, &|output| {
+                        if self.do_early_return.load(Ordering::Acquire) {
+                            return Ok(true); // Do safe exit
+                        }
                         self.client
                             .proxies()
                             .anime()
                             .write(output)
                             .map_err(|e| AnimeError::Dbus(format!("{}", e)))
+                            .map(|_| false)
                     })?;
                 }
                 ActionData::Image(image) => {
@@ -131,7 +135,7 @@ impl<'a> CtrlAnimeInner<'static> {
 
 pub struct CtrlAnime<'a> {
     config: Arc<Mutex<UserAnimeConfig>>,
-    client: RogDbusClient<'a>,
+    client: RogDbusClientBlocking<'a>,
     inner: Arc<Mutex<CtrlAnimeInner<'a>>>,
     /// Must be the same Atomic as in CtrlAnimeInner
     inner_early_return: Arc<AtomicBool>,
@@ -141,7 +145,7 @@ impl<'a> CtrlAnime<'static> {
     pub fn new(
         config: Arc<Mutex<UserAnimeConfig>>,
         inner: Arc<Mutex<CtrlAnimeInner<'static>>>,
-        client: RogDbusClient<'static>,
+        client: RogDbusClientBlocking<'static>,
         inner_early_return: Arc<AtomicBool>,
     ) -> Result<Self, Error> {
         Ok(CtrlAnime {
@@ -152,12 +156,14 @@ impl<'a> CtrlAnime<'static> {
         })
     }
 
-    pub fn add_to_server(self, server: &mut zbus::ObjectServer) {
+    pub async fn add_to_server(self, server: &mut zbus::Connection) {
         server
+            .object_server()
             .at(
                 &ObjectPath::from_str_unchecked("/org/asuslinux/Anime"),
                 self,
             )
+            .await
             .map_err(|err| {
                 println!("CtrlAnime: add_to_server {}", err);
                 err
@@ -353,13 +359,13 @@ impl CtrlAnime<'static> {
     pub fn set_state(&mut self, on: bool) -> zbus::fdo::Result<()> {
         // Operations here need to be in specific order
         if on {
-            self.client.proxies().anime().set_led_power(on)?;
+            self.client.proxies().anime().set_on_off(on).ok();
             // Let the inner loop run
             self.inner_early_return.store(false, Ordering::SeqCst);
         } else {
             // Must make the inner run loop return early
             self.inner_early_return.store(true, Ordering::SeqCst);
-            self.client.proxies().anime().set_led_power(on)?;
+            self.client.proxies().anime().set_on_off(on).ok();
         }
         Ok(())
     }

daemon-user/src/daemon.rs

@@ -1,13 +1,14 @@
-use rog_dbus::RogDbusClient;
+use rog_anime::usb::get_anime_type;
+use rog_dbus::RogDbusClientBlocking;
 use rog_user::{
     ctrl_anime::{CtrlAnime, CtrlAnimeInner},
     user_config::*,
     DBUS_NAME,
 };
+use smol::Executor;
 use std::sync::Arc;
 use std::sync::Mutex;
-use std::thread;
-use zbus::{fdo, Connection};
+use zbus::Connection;
 
 use std::sync::atomic::AtomicBool;
 
@@ -17,51 +18,55 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
     println!("     rog-dbus v{}", rog_dbus::VERSION);
     println!("rog-supported v{}", rog_supported::VERSION);
 
-    let (client, _) = RogDbusClient::new()?;
-    let supported = client.proxies().supported().get_supported_functions()?;
+    let (client, _) = RogDbusClientBlocking::new()?;
+    let supported = client.proxies().supported().supported_functions()?;
 
     let mut config = UserConfig::new();
     config.load_config()?;
 
-    let anime_config = UserAnimeConfig::load_config(config.active_anime)?;
-    let anime = anime_config.create_anime()?;
-
-    let anime_config = Arc::new(Mutex::new(anime_config));
-
-    // Create server
-    let connection = Connection::new_session()?;
-    fdo::DBusProxy::new(&connection)?
-        .request_name(DBUS_NAME, fdo::RequestNameFlags::ReplaceExisting.into())?;
-    let mut server = zbus::ObjectServer::new(&connection);
+    let executor = Executor::new();
 
+    let early_return = Arc::new(AtomicBool::new(false));
     // Set up the anime data and run loop/thread
     if supported.anime_ctrl.0 {
-        let early_return = Arc::new(AtomicBool::new(false));
-        // Inner behind mutex required for thread safety
-        let inner = Arc::new(Mutex::new(CtrlAnimeInner::new(
-            anime,
-            client,
-            early_return.clone(),
-        )?));
-        // Need new client object for dbus control part
-        let (client, _) = RogDbusClient::new()?;
-        let anime_control = CtrlAnime::new(anime_config, inner.clone(), client, early_return)?;
-        anime_control.add_to_server(&mut server);
-        // Thread using inner
-        let _anime_thread = thread::Builder::new()
-            .name("Anime User".into())
-            .spawn(move || loop {
-                if let Ok(inner) = inner.try_lock() {
-                    inner.run().ok();
+        let anime_type = get_anime_type()?;
+        let anime_config = UserAnimeConfig::load_config(config.active_anime)?;
+        let anime = anime_config.create_anime(anime_type)?;
+        let anime_config = Arc::new(Mutex::new(anime_config));
+
+        executor
+            .spawn(async move {
+                // Create server
+                let mut connection = Connection::session().await.unwrap();
+                connection.request_name(DBUS_NAME).await.unwrap();
+
+                // Inner behind mutex required for thread safety
+                let inner = Arc::new(Mutex::new(
+                    CtrlAnimeInner::new(anime, client, early_return.clone()).unwrap(),
+                ));
+                // Need new client object for dbus control part
+                let (client, _) = RogDbusClientBlocking::new().unwrap();
+                let anime_control =
+                    CtrlAnime::new(anime_config, inner.clone(), client, early_return).unwrap();
+                anime_control.add_to_server(&mut connection).await;
+                loop {
+                    if let Ok(inner) = inner.clone().try_lock() {
+                        inner.run().ok();
+                    }
                 }
-            })?;
+            })
+            .detach();
     }
 
-    if supported.keyboard_led.per_key_led_mode {}
+    // if supported.keyboard_led.per_key_led_mode {
+    //     executor
+    //         .spawn(async move {
+    //            //
+    //         })
+    //         .detach();
+    // }
 
     loop {
-        if let Err(err) = server.try_handle_next() {
-            println!("{}", err);
-        }
+        smol::block_on(executor.tick());
     }
 }

daemon-user/src/user_config.rs

@@ -4,7 +4,7 @@ use std::{
     time::Duration,
 };
 
-use rog_anime::{ActionLoader, AnimTime, Fade, Sequences, Vec2};
+use rog_anime::{ActionLoader, AnimTime, AnimeType, Fade, Sequences, Vec2};
 use serde_derive::{Deserialize, Serialize};
 
 use crate::error::Error;
@@ -16,8 +16,8 @@ pub struct UserAnimeConfig {
 }
 
 impl UserAnimeConfig {
-    pub fn create_anime(&self) -> Result<Sequences, Error> {
-        let mut seq = Sequences::new();
+    pub fn create_anime(&self, anime_type: AnimeType) -> Result<Sequences, Error> {
+        let mut seq = Sequences::new(anime_type);
 
         for (idx, action) in self.anime.iter().enumerate() {
             seq.insert(idx, action)?;

daemon/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "daemon"
-version = "4.0.0"
+version = "4.3.0"
 license = "MPL-2.0"
 readme = "README.md"
 authors = ["Luke <luke@ljones.dev>"]
@@ -18,22 +18,25 @@ name = "asusd"
 path = "src/daemon.rs"
 
 [dependencies]
-rog_anime = { path = "../rog-anime" }
-rog_aura = { path = "../rog-aura" }
+rog_anime = { path = "../rog-anime", features = ["dbus"] }
+rog_aura = { path = "../rog-aura", features = ["dbus"] }
 rog_supported = { path = "../rog-supported" }
 rog_profiles = { path = "../rog-profiles" }
 rog_dbus = { path = "../rog-dbus" }
-rusb = "^0.8"
+
+async-trait = "^0.1"
+smol = "^1.2"
+
+rusb = "^0.9"
 udev = "^0.6"
 
 # cli and logging
 log = "^0.4"
-env_logger = "^0.8"
+env_logger = "^0.9"
 
-zbus = "^1.9.1"
-zvariant = "^2.6"
-zvariant_derive = { version = "^2.6" }
-logind-zbus = "^0.7.1"
+zbus = "^2.2"
+zvariant = "^3.2"
+logind-zbus = { version = "^3.0" } #, default-features = false, features = ["non_blocking"] }
 
 # serialisation
 serde = "^1.0"

daemon/src/config.rs

@@ -2,10 +2,11 @@ use log::{error, warn};
 use serde_derive::{Deserialize, Serialize};
 use std::fs::{File, OpenOptions};
 use std::io::{Read, Write};
+use std::path::PathBuf;
 
 pub static CONFIG_PATH: &str = "/etc/asusd/asusd.conf";
 
-#[derive(Deserialize, Serialize)]
+#[derive(Deserialize, Serialize, Default)]
 pub struct Config {
     /// Save charge limit for restoring on boot
     pub bat_charge_limit: u8,
@@ -24,8 +25,8 @@ impl Config {
             .read(true)
             .write(true)
             .create(true)
-            .open(&CONFIG_PATH)
-            .unwrap_or_else(|_| panic!("The directory /etc/asusd/ is missing")); // okay to cause panic here
+            .open(&PathBuf::from(CONFIG_PATH))
+            .unwrap_or_else(|e| panic!("Error opening {}, {}", CONFIG_PATH, e)); // okay to cause panic here
         let mut buf = String::new();
         let config;
         if let Ok(read_len) = file.read_to_string(&mut buf) {
@@ -34,8 +35,18 @@ impl Config {
             } else if let Ok(data) = serde_json::from_str(&buf) {
                 config = data;
             } else {
-                warn!("Could not deserialise {}", CONFIG_PATH);
-                panic!("Please remove {} then restart asusd", CONFIG_PATH);
+                warn!(
+                    "Could not deserialise {}.\nWill rename to {}-old and recreate config",
+                    CONFIG_PATH, CONFIG_PATH
+                );
+                let cfg_old = CONFIG_PATH.to_string() + "-old";
+                std::fs::rename(CONFIG_PATH, cfg_old).unwrap_or_else(|err| {
+                    panic!(
+                        "Could not rename. Please remove {} then restart service: Error {}",
+                        CONFIG_PATH, err
+                    )
+                });
+                config = Self::new();
             }
         } else {
             config = Self::new()

daemon/src/ctrl_anime/config.rs

@@ -1,7 +1,7 @@
 use crate::VERSION;
 use log::{error, info, warn};
-use rog_anime::Fade;
 use rog_anime::{error::AnimeError, ActionData, ActionLoader, AnimTime, Vec2};
+use rog_anime::{AnimeType, Fade};
 use serde_derive::{Deserialize, Serialize};
 use std::fs::{File, OpenOptions};
 use std::io::{Read, Write};
@@ -80,28 +80,32 @@ pub struct AnimeConfigCached {
 }
 
 impl AnimeConfigCached {
-    pub fn init_from_config(&mut self, config: &AnimeConfig) -> Result<(), AnimeError> {
+    pub fn init_from_config(
+        &mut self,
+        config: &AnimeConfig,
+        anime_type: AnimeType,
+    ) -> Result<(), AnimeError> {
         let mut sys = Vec::with_capacity(config.system.len());
         for ani in config.system.iter() {
-            sys.push(ActionData::from_anime_action(ani)?);
+            sys.push(ActionData::from_anime_action(anime_type, ani)?);
         }
         self.system = sys;
 
         let mut boot = Vec::with_capacity(config.boot.len());
         for ani in config.boot.iter() {
-            boot.push(ActionData::from_anime_action(ani)?);
+            boot.push(ActionData::from_anime_action(anime_type, ani)?);
         }
         self.boot = boot;
 
         let mut wake = Vec::with_capacity(config.wake.len());
         for ani in config.wake.iter() {
-            wake.push(ActionData::from_anime_action(ani)?);
+            wake.push(ActionData::from_anime_action(anime_type, ani)?);
         }
         self.wake = wake;
 
         let mut shutdown = Vec::with_capacity(config.shutdown.len());
         for ani in config.shutdown.iter() {
-            shutdown.push(ActionData::from_anime_action(ani)?);
+            shutdown.push(ActionData::from_anime_action(anime_type, ani)?);
         }
         self.shutdown = shutdown;
         Ok(())
@@ -153,29 +157,48 @@ impl AnimeConfig {
             if read_len == 0 {
                 return AnimeConfig::create_default(&mut file);
             } else {
-                if let Ok(data) = serde_json::from_str(&buf) {
+                if let Ok(mut data) = serde_json::from_str(&buf) {
+                    Self::clamp_config_brightness(&mut data);
                     return data;
                 } else if let Ok(data) = serde_json::from_str::<AnimeConfigV341>(&buf) {
-                    let config = data.into_current();
+                    let mut config = data.into_current();
                     config.write();
                     info!("Updated config version to: {}", VERSION);
+                    Self::clamp_config_brightness(&mut config);
                     return config;
                 } else if let Ok(data) = serde_json::from_str::<AnimeConfigV352>(&buf) {
-                    let config = data.into_current();
+                    let mut config = data.into_current();
                     config.write();
                     info!("Updated config version to: {}", VERSION);
+                    Self::clamp_config_brightness(&mut config);
                     return config;
                 }
-                AnimeConfig::write_backup(buf);
                 warn!(
-                    "Could not deserialise {}. Backed up as *-old",
-                    ANIME_CONFIG_PATH
+                    "Could not deserialise {}.\nWill rename to {}-old and recreate config",
+                    ANIME_CONFIG_PATH, ANIME_CONFIG_PATH
                 );
+                let cfg_old = ANIME_CONFIG_PATH.to_string() + "-old";
+                std::fs::rename(ANIME_CONFIG_PATH, cfg_old).unwrap_or_else(|err| {
+                    panic!(
+                        "Could not rename. Please remove {} then restart service: Error {}",
+                        ANIME_CONFIG_PATH, err
+                    )
+                });
             }
         }
         AnimeConfig::create_default(&mut file)
     }
 
+    fn clamp_config_brightness(mut config: &mut AnimeConfig) {
+        if config.brightness < 0.0 || config.brightness > 1.0 {
+            warn!(
+                "Clamped brightness to [0.0 ; 1.0], was {}",
+                config.brightness
+            );
+            config.brightness = f32::max(0.0, f32::min(1.0, config.brightness));
+        }
+    }
+
     fn create_default(file: &mut File) -> Self {
         // create a default config here
         let config = AnimeConfig {
@@ -246,12 +269,4 @@ impl AnimeConfig {
         file.write_all(json.as_bytes())
             .unwrap_or_else(|err| error!("Could not write config: {}", err));
     }
-
-    fn write_backup(buf: String) {
-        let mut path = ANIME_CONFIG_PATH.to_string();
-        path.push_str("-old");
-        let mut file = File::create(&path).expect("Couldn't overwrite config");
-        file.write_all(buf.as_bytes())
-            .unwrap_or_else(|err| error!("Could not write config: {}", err));
-    }
 }

daemon/src/ctrl_anime/mod.rs

@@ -2,21 +2,25 @@ pub mod config;
 pub mod zbus;
 
 use ::zbus::Connection;
+use async_trait::async_trait;
 use log::{error, info, warn};
-use logind_zbus::ManagerProxy;
+use logind_zbus::manager::ManagerProxy;
 use rog_anime::{
+    error::AnimeError,
     usb::{
-        pkt_for_apply, pkt_for_flush, pkt_for_set_boot, pkt_for_set_on, pkts_for_init, PROD_ID,
-        VENDOR_ID,
+        find_node, get_anime_type, pkt_for_apply, pkt_for_flush, pkt_for_set_boot, pkt_for_set_on,
+        pkts_for_init, PROD_ID, VENDOR_ID,
     },
-    ActionData, AnimeDataBuffer, AnimePacketType, ANIME_DATA_LEN,
+    ActionData, AnimeDataBuffer, AnimePacketType, AnimeType,
 };
 use rog_supported::AnimeSupportedFunctions;
 use rusb::{Device, DeviceHandle};
+use smol::{stream::StreamExt, Executor};
 use std::{
     cell::RefCell,
+    convert::TryFrom,
     error::Error,
-    sync::{Arc, Mutex},
+    sync::{Arc, Mutex, MutexGuard},
     thread::sleep,
 };
 use std::{
@@ -38,6 +42,7 @@ impl GetSupported for CtrlAnime {
 
 pub struct CtrlAnime {
     _node: String,
+    anime_type: AnimeType,
     handle: RefCell<DeviceHandle<rusb::GlobalContext>>,
     cache: AnimeConfigCached,
     config: AnimeConfig,
@@ -50,15 +55,17 @@ pub struct CtrlAnime {
 impl CtrlAnime {
     #[inline]
     pub fn new(config: AnimeConfig) -> Result<CtrlAnime, Box<dyn Error>> {
-        let node = Self::find_node("193b")?;
+        let node = find_node("193b")?;
+        let anime_type = get_anime_type()?;
         let device = Self::get_dev_handle()?;
 
         info!("Device has an AniMe Matrix display");
         let mut cache = AnimeConfigCached::default();
-        cache.init_from_config(&config)?;
+        cache.init_from_config(&config, anime_type)?;
 
         let ctrl = CtrlAnime {
             _node: node,
+            anime_type,
             handle: RefCell::new(device),
             cache,
             config,
@@ -70,34 +77,6 @@ impl CtrlAnime {
         Ok(ctrl)
     }
 
-    fn find_node(id_product: &str) -> Result<String, RogError> {
-        let mut enumerator = udev::Enumerator::new().map_err(|err| {
-            warn!("{}", err);
-            RogError::Udev("enumerator failed".into(), err)
-        })?;
-        enumerator.match_subsystem("usb").map_err(|err| {
-            warn!("{}", err);
-            RogError::Udev("match_subsystem failed".into(), err)
-        })?;
-
-        for device in enumerator.scan_devices().map_err(|err| {
-            warn!("{}", err);
-            RogError::Udev("scan_devices failed".into(), err)
-        })? {
-            if let Some(attr) = device.attribute_value("idProduct") {
-                if attr == id_product {
-                    if let Some(dev_node) = device.devnode() {
-                        info!("Using device at: {:?} for AniMe control", dev_node);
-                        return Ok(dev_node.to_string_lossy().to_string());
-                    }
-                }
-            }
-        }
-        Err(RogError::MissingFunction(
-            "ASUS AniMe device node not found".into(),
-        ))
-    }
-
     fn get_dev_handle() -> Result<DeviceHandle<rusb::GlobalContext>, Box<dyn Error>> {
         // We don't expect this ID to ever change
         let device = CtrlAnime::get_device(0x0b05, 0x193b)?;
@@ -138,6 +117,7 @@ impl CtrlAnime {
             warn!("AniMe system actions was empty");
             return;
         }
+
         // Loop rules:
         // - Lock the mutex **only when required**. That is, the lock must be held for the shortest duration possible.
         // - An AtomicBool used for thread exit should be checked in every loop, including nested
@@ -147,60 +127,72 @@ impl CtrlAnime {
         std::thread::Builder::new()
             .name("AniMe system thread start".into())
             .spawn(move || {
-                info!("AniMe system thread started");
+                info!("AniMe new system thread started");
                 // Getting copies of these Atomics is done *in* the thread to ensure
                 // we don't block other threads/main
                 let thread_exit;
                 let thread_running;
-                // First two loops are to ensure we *do* aquire a lock on the mutex
-                // The reason the loop is required is because the USB writes can block
-                // for up to 10ms. We can't fail to get the atomics.
+                let anime_type;
                 loop {
                     if let Ok(lock) = inner.try_lock() {
                         thread_exit = lock.thread_exit.clone();
                         thread_running = lock.thread_running.clone();
-                        // Make any running loop exit first
-                        thread_exit.store(true, Ordering::SeqCst);
+                        anime_type = lock.anime_type;
                         break;
                     }
                 }
+                // First two loops are to ensure we *do* aquire a lock on the mutex
+                // The reason the loop is required is because the USB writes can block
+                // for up to 10ms. We can't fail to get the atomics.
+                while thread_running.load(Ordering::SeqCst) {
+                    // Make any running loop exit first
+                    thread_exit.store(true, Ordering::SeqCst);
+                }
 
-                loop {
-                    // wait for other threads to set not running so we know they exited
-                    if !thread_running.load(Ordering::SeqCst) {
-                        thread_exit.store(false, Ordering::SeqCst);
-                        info!("AniMe forced a thread to exit");
-                        break;
-                    }
-                }
+                info!("AniMe no previous system thread running (now)");
+                thread_exit.store(false, Ordering::SeqCst);
 
                 'main: loop {
-                    if thread_exit.load(Ordering::SeqCst) {
-                        break 'main;
-                    }
+                    thread_running.store(true, Ordering::SeqCst);
                     for action in actions.iter() {
+                        if thread_exit.load(Ordering::SeqCst) {
+                            break 'main;
+                        }
                         match action {
                             ActionData::Animation(frames) => {
-                                if rog_anime::run_animation(frames, thread_exit.clone(), &|frame| {
-                                    if let Ok(lock) = inner.try_lock() {
-                                        lock.write_data_buffer(frame);
+                                if let Err(err) = rog_anime::run_animation(frames, &|frame| {
+                                    if thread_exit.load(Ordering::Acquire) {
+                                        info!("rog-anime: frame-loop was asked to exit");
+                                        return Ok(true); // Do safe exit
                                     }
-                                    Ok(())
-                                })
-                                .map_err(|err| warn!("rog_anime::run_animation: {}", err))
-                                .is_err()
-                                {
+                                    inner
+                                        .try_lock()
+                                        .map(|lock| {
+                                            lock.write_data_buffer(frame)
+                                                .map_err(|err| {
+                                                    warn!(
+                                                        "rog_anime::run_animation:callback {}",
+                                                        err
+                                                    );
+                                                })
+                                                .ok();
+                                            false // Don't exit yet
+                                        })
+                                        .map_err(|err| {
+                                            warn!("rog_anime::run_animation:callback {}", err);
+                                            AnimeError::NoFrames
+                                        })
+                                }) {
+                                    warn!("rog_anime::run_animation:Animation {}", err);
                                     break 'main;
                                 };
-
-                                if thread_exit.load(Ordering::SeqCst) {
-                                    break 'main;
-                                }
                             }
                             ActionData::Image(image) => {
                                 once = false;
                                 if let Ok(lock) = inner.try_lock() {
                                     lock.write_data_buffer(image.as_ref().clone())
+                                        .map_err(|e| error!("{}", e))
+                                        .ok();
                                 }
                             }
                             ActionData::Pause(duration) => sleep(*duration),
@@ -210,17 +202,27 @@ impl CtrlAnime {
                             ActionData::Matrix => {}
                         }
                     }
+                    if thread_exit.load(Ordering::SeqCst) {
+                        break 'main;
+                    }
                     if once || actions.is_empty() {
                         break 'main;
                     }
                 }
                 // Clear the display on exit
                 if let Ok(lock) = inner.try_lock() {
-                    let data = AnimeDataBuffer::from_vec([0u8; ANIME_DATA_LEN].to_vec());
-                    lock.write_data_buffer(data);
+                    if let Ok(data) =
+                        AnimeDataBuffer::from_vec(anime_type, vec![0u8; anime_type.data_length()])
+                            .map_err(|e| error!("{}", e))
+                    {
+                        lock.write_data_buffer(data)
+                            .map_err(|err| {
+                                warn!("rog_anime::run_animation:callback {}", err);
+                            })
+                            .ok();
+                    }
                 }
                 // Loop ended, set the atmonics
-                thread_exit.store(false, Ordering::SeqCst);
                 thread_running.store(false, Ordering::SeqCst);
                 info!("AniMe system thread exited");
             })
@@ -269,19 +271,20 @@ impl CtrlAnime {
 
     /// Write only a data packet. This will modify the leds brightness using the
     /// global brightness set in config.
-    fn write_data_buffer(&self, mut buffer: AnimeDataBuffer) {
-        for led in buffer.get_mut()[7..].iter_mut() {
+    fn write_data_buffer(&self, mut buffer: AnimeDataBuffer) -> Result<(), RogError> {
+        for led in buffer.data_mut()[7..].iter_mut() {
             let mut bright = *led as f32 * self.config.brightness;
             if bright > 254.0 {
                 bright = 254.0;
             }
             *led = bright as u8;
         }
-        let data = AnimePacketType::from(buffer);
+        let data = AnimePacketType::try_from(buffer)?;
         for row in data.iter() {
             self.write_bytes(row);
         }
         self.write_bytes(&pkt_for_flush());
+        Ok(())
     }
 
     fn do_initialization(&self) {
@@ -291,89 +294,83 @@ impl CtrlAnime {
     }
 }
 
-pub struct CtrlAnimeTask<'a> {
+pub struct CtrlAnimeTask {
     inner: Arc<Mutex<CtrlAnime>>,
-    _c: Connection,
-    manager: ManagerProxy<'a>,
 }
 
-impl<'a> CtrlAnimeTask<'a> {
-    pub fn new(inner: Arc<Mutex<CtrlAnime>>) -> Self {
-        let connection =
-            Connection::new_system().expect("CtrlAnimeTask could not create dbus connection");
-
-        let manager =
-            ManagerProxy::new(&connection).expect("CtrlAnimeTask could not create ManagerProxy");
-
-        let c1 = inner.clone();
-        // Run this action when the system starts shutting down
-        manager
-            .connect_prepare_for_shutdown(move |shutdown| {
-                if shutdown {
-                    'outer: loop {
-                        if let Ok(lock) = c1.try_lock() {
-                            lock.thread_exit.store(true, Ordering::SeqCst);
-                            CtrlAnime::run_thread(c1.clone(), lock.cache.shutdown.clone(), false);
-                            break 'outer;
-                        }
-                    }
-                }
-                Ok(())
-            })
-            .map_err(|err| {
-                warn!("CtrlAnimeTask: new() {}", err);
-                err
-            })
-            .ok();
-
-        let c1 = inner.clone();
-        // Run this action when the system wakes up from sleep
-        manager
-            .connect_prepare_for_sleep(move |sleep| {
-                if !sleep {
-                    // wait a fraction for things to wake up properly
-                    std::thread::sleep(Duration::from_millis(100));
-                    'outer: loop {
-                        if let Ok(lock) = c1.try_lock() {
-                            lock.thread_exit.store(true, Ordering::SeqCst);
-                            CtrlAnime::run_thread(c1.clone(), lock.cache.wake.clone(), true);
-                            break 'outer;
-                        }
-                    }
-                }
-                Ok(())
-            })
-            .map_err(|err| {
-                warn!("CtrlAnimeTask: new() {}", err);
-                err
-            })
-            .ok();
-
-        Self {
-            inner,
-            _c: connection,
-            manager,
-        }
+impl CtrlAnimeTask {
+    pub async fn new(inner: Arc<Mutex<CtrlAnime>>) -> CtrlAnimeTask {
+        Self { inner }
     }
 }
 
-impl<'a> crate::CtrlTask for CtrlAnimeTask<'a> {
-    fn do_task(&self) -> Result<(), RogError> {
-        if let Ok(mut lock) = self.inner.try_lock() {
-            // Refresh the config and cache incase the user has edited it
-            let config = AnimeConfig::load();
-            lock.cache
-                .init_from_config(&config)
-                .map_err(|err| {
-                    warn!("CtrlAnimeTask: do_task {}", err);
-                    err
-                })
-                .ok();
-        }
+#[async_trait]
+impl crate::CtrlTask for CtrlAnimeTask {
+    async fn create_tasks(&self, executor: &mut Executor) -> Result<(), RogError> {
+        let connection = Connection::system()
+            .await
+            .expect("CtrlAnimeTask could not create dbus connection");
+
+        let manager = ManagerProxy::new(&connection)
+            .await
+            .expect("CtrlAnimeTask could not create ManagerProxy");
+
+        let run_action =
+            |start: bool, lock: MutexGuard<CtrlAnime>, inner: Arc<Mutex<CtrlAnime>>| {
+                if start {
+                    info!("CtrlAnimeTask running sleep animation");
+                    CtrlAnime::run_thread(inner.clone(), lock.cache.shutdown.clone(), true);
+                } else {
+                    info!("CtrlAnimeTask running wake animation");
+                    CtrlAnime::run_thread(inner.clone(), lock.cache.wake.clone(), true);
+                }
+            };
+
+        let inner = self.inner.clone();
+        executor
+            .spawn(async move {
+                if let Ok(notif) = manager.receive_prepare_for_sleep().await {
+                    notif
+                        .for_each(|event| {
+                            if let Ok(args) = event.args() {
+                                // Loop is required to try an attempt to get the mutex *without* blocking
+                                // other threads - it is possible to end up with deadlocks otherwise.
+                                loop {
+                                    if let Ok(lock) = inner.clone().try_lock() {
+                                        run_action(args.start, lock, inner.clone());
+                                        break;
+                                    }
+                                }
+                            }
+                        })
+                        .await;
+                }
+            })
+            .detach();
+
+        let manager = ManagerProxy::new(&connection)
+            .await
+            .expect("CtrlAnimeTask could not create ManagerProxy");
+
+        let inner = self.inner.clone();
+        executor
+            .spawn(async move {
+                if let Ok(notif) = manager.receive_prepare_for_shutdown().await {
+                    notif
+                        .for_each(|event| {
+                            if let Ok(args) = event.args() {
+                                loop {
+                                    if let Ok(lock) = inner.clone().try_lock() {
+                                        run_action(args.start, lock, inner.clone());
+                                    }
+                                }
+                            }
+                        })
+                        .await;
+                }
+            })
+            .detach();
 
-        // Check for signals on each task iteration, this will run the callbacks
-        // if any signal is recieved
-        self.manager.next_signal()?;
         Ok(())
     }
 }

daemon/src/ctrl_anime/zbus.rs

@@ -1,12 +1,12 @@
 use std::sync::{Arc, Mutex};
 
+use async_trait::async_trait;
 use log::warn;
 use rog_anime::{
     usb::{pkt_for_apply, pkt_for_set_boot, pkt_for_set_on},
     AnimeDataBuffer, AnimePowerStates,
 };
-use zbus::dbus_interface;
-use zvariant::ObjectPath;
+use zbus::{dbus_interface, Connection, SignalContext};
 
 use std::sync::atomic::Ordering;
 
@@ -15,18 +15,10 @@ use super::CtrlAnime;
 pub struct CtrlAnimeZbus(pub Arc<Mutex<CtrlAnime>>);
 
 /// The struct with the main dbus methods requires this trait
+#[async_trait]
 impl crate::ZbusAdd for CtrlAnimeZbus {
-    fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(
-                &ObjectPath::from_str_unchecked("/org/asuslinux/Anime"),
-                self,
-            )
-            .map_err(|err| {
-                warn!("CtrlAnimeDisplay: add_to_server {}", err);
-                err
-            })
-            .ok();
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/Anime", server).await;
     }
 }
 
@@ -36,14 +28,18 @@ impl crate::ZbusAdd for CtrlAnimeZbus {
 #[dbus_interface(name = "org.asuslinux.Daemon")]
 impl CtrlAnimeZbus {
     /// Writes a data stream of length. Will force system thread to exit until it is restarted
-    fn write(&self, input: AnimeDataBuffer) {
+    fn write(&self, input: AnimeDataBuffer) -> zbus::fdo::Result<()> {
         'outer: loop {
             if let Ok(lock) = self.0.try_lock() {
                 lock.thread_exit.store(true, Ordering::SeqCst);
-                lock.write_data_buffer(input);
+                lock.write_data_buffer(input).map_err(|err| {
+                    warn!("rog_anime::run_animation:callback {}", err);
+                    err
+                })?;
                 break 'outer;
             }
         }
+        Ok(())
     }
 
     /// Set the global AniMe brightness
@@ -53,8 +49,8 @@ impl CtrlAnimeZbus {
                 let mut bright = bright;
                 if bright < 0.0 {
                     bright = 0.0
-                } else if bright > 254.0 {
-                    bright = 254.0;
+                } else if bright > 1.0 {
+                    bright = 1.0;
                 }
                 lock.config.brightness = bright;
                 lock.config.write();
@@ -64,26 +60,30 @@ impl CtrlAnimeZbus {
     }
 
     /// Set whether the AniMe is displaying images/data
-    fn set_on_off(&self, status: bool) {
+    async fn set_on_off(&self, #[zbus(signal_context)] ctxt: SignalContext<'_>, status: bool) {
+        let states;
         'outer: loop {
             if let Ok(mut lock) = self.0.try_lock() {
                 lock.write_bytes(&pkt_for_set_on(status));
                 lock.config.awake_enabled = status;
                 lock.config.write();
 
-                let states = AnimePowerStates {
+                states = Some(AnimePowerStates {
+                    brightness: lock.config.brightness.floor() as u8,
                     enabled: lock.config.awake_enabled,
                     boot_anim_enabled: lock.config.boot_anim_enabled,
-                };
-                self.notify_power_states(&states)
-                    .unwrap_or_else(|err| warn!("{}", err));
+                });
                 break 'outer;
             }
         }
+        if let Some(state) = states {
+            Self::notify_power_states(&ctxt, state).await.ok();
+        }
     }
 
     /// Set whether the AniMe will show boot, suspend, or off animations
-    fn set_boot_on_off(&self, on: bool) {
+    async fn set_boot_on_off(&self, #[zbus(signal_context)] ctxt: SignalContext<'_>, on: bool) {
+        let states;
         'outer: loop {
             if let Ok(mut lock) = self.0.try_lock() {
                 lock.write_bytes(&pkt_for_set_boot(on));
@@ -91,15 +91,17 @@ impl CtrlAnimeZbus {
                 lock.config.boot_anim_enabled = on;
                 lock.config.write();
 
-                let states = AnimePowerStates {
+                states = Some(AnimePowerStates {
+                    brightness: lock.config.brightness.floor() as u8,
                     enabled: lock.config.awake_enabled,
                     boot_anim_enabled: lock.config.boot_anim_enabled,
-                };
-                self.notify_power_states(&states)
-                    .unwrap_or_else(|err| warn!("{}", err));
+                });
                 break 'outer;
             }
         }
+        if let Some(state) = states {
+            Self::notify_power_states(&ctxt, state).await.ok();
+        }
     }
 
     /// The main loop is the base system set action if the user isn't running
@@ -116,7 +118,7 @@ impl CtrlAnimeZbus {
         }
     }
 
-    /// Get status of if the AniMe LEDs are on
+    /// Get status of if the AniMe LEDs are on/displaying while system is awake
     #[dbus_interface(property)]
     fn awake_enabled(&self) -> bool {
         if let Ok(ctrl) = self.0.try_lock() {
@@ -136,5 +138,8 @@ impl CtrlAnimeZbus {
 
     /// Notify listeners of the status of AniMe LED power and factory system-status animations
     #[dbus_interface(signal)]
-    fn notify_power_states(&self, data: &AnimePowerStates) -> zbus::Result<()>;
+    async fn notify_power_states(
+        ctxt: &SignalContext<'_>,
+        data: AnimePowerStates,
+    ) -> zbus::Result<()>;
 }

daemon/src/ctrl_aura/config.rs

@@ -1,74 +1,128 @@
-use crate::laptops::LaptopLedData;
-use log::{error, info, warn};
-use rog_aura::{AuraEffect, AuraModeNum, AuraZone, LedBrightness};
+use crate::laptops::{LaptopLedData, ASUS_KEYBOARD_DEVICES};
+use log::{error, warn};
+use rog_aura::usb::{AuraDev1866, AuraDev19b6, AuraPowerDev};
+use rog_aura::{AuraEffect, AuraModeNum, AuraZone, Direction, LedBrightness, Speed, GRADIENT};
 use serde_derive::{Deserialize, Serialize};
-use std::collections::BTreeMap;
+use std::collections::{BTreeMap, HashSet};
 use std::fs::{File, OpenOptions};
 use std::io::{Read, Write};
 
+use super::controller::CtrlKbdLed;
+
 pub static AURA_CONFIG_PATH: &str = "/etc/asusd/aura.conf";
 
-#[derive(Deserialize, Serialize)]
-pub struct AuraConfigV320 {
-    pub brightness: u32,
-    pub current_mode: AuraModeNum,
-    pub builtins: BTreeMap<AuraModeNum, AuraEffect>,
-    pub multizone: Option<AuraMultiZone>,
+/// Enable/disable LED control in various states such as
+/// when the device is awake, suspended, shutting down or
+/// booting.
+#[derive(Clone, Debug, PartialEq, Eq, Serialize, Deserialize)]
+pub enum AuraPowerConfig {
+    AuraDev1866(HashSet<AuraDev1866>),
+    AuraDev19b6(HashSet<AuraDev19b6>),
 }
 
-impl AuraConfigV320 {
-    pub(crate) fn into_current(self) -> AuraConfig {
-        AuraConfig {
-            brightness: <LedBrightness>::from(self.brightness),
-            current_mode: self.current_mode,
-            builtins: self.builtins,
-            multizone: self.multizone,
-            awake_enabled: true,
-            sleep_anim_enabled: true,
-        }
-    }
-}
-
-#[derive(Deserialize, Serialize)]
-pub struct AuraConfigV352 {
-    pub brightness: LedBrightness,
-    pub current_mode: AuraModeNum,
-    pub builtins: BTreeMap<AuraModeNum, AuraEffect>,
-    pub multizone: Option<AuraMultiZone>,
-}
-
-impl AuraConfigV352 {
-    pub(crate) fn into_current(self) -> AuraConfig {
-        AuraConfig {
-            brightness: self.brightness,
-            current_mode: self.current_mode,
-            builtins: self.builtins,
-            multizone: self.multizone,
-            awake_enabled: true,
-            sleep_anim_enabled: true,
+impl AuraPowerConfig {
+    pub fn to_bytes(control: &Self) -> [u8; 3] {
+        match control {
+            AuraPowerConfig::AuraDev1866(c) => {
+                let c: Vec<AuraDev1866> = c.iter().map(|v| *v).collect();
+                AuraDev1866::to_bytes(&c)
+            }
+            AuraPowerConfig::AuraDev19b6(c) => {
+                let c: Vec<AuraDev19b6> = c.iter().map(|v| *v).collect();
+                AuraDev19b6::to_bytes(&c)
+            }
+        }
+    }
+
+    pub fn set_0x1866(&mut self, power: AuraDev1866, on: bool) {
+        if let Self::AuraDev1866(p) = self {
+            if on {
+                p.insert(power);
+            } else {
+                p.remove(&power);
+            }
+        }
+    }
+
+    pub fn set_0x19b6(&mut self, power: AuraDev19b6, on: bool) {
+        if let Self::AuraDev19b6(p) = self {
+            if on {
+                p.insert(power);
+            } else {
+                p.remove(&power);
+            }
+        }
+    }
+}
+
+impl From<&AuraPowerConfig> for AuraPowerDev {
+    fn from(config: &AuraPowerConfig) -> Self {
+        match config {
+            AuraPowerConfig::AuraDev1866(d) => AuraPowerDev {
+                x1866: d.iter().map(|o| *o).collect(),
+                x19b6: vec![],
+            },
+            AuraPowerConfig::AuraDev19b6(d) => AuraPowerDev {
+                x1866: vec![],
+                x19b6: d.iter().map(|o| *o).collect(),
+            },
         }
     }
 }
 
 #[derive(Deserialize, Serialize)]
+#[serde(default)]
 pub struct AuraConfig {
     pub brightness: LedBrightness,
     pub current_mode: AuraModeNum,
     pub builtins: BTreeMap<AuraModeNum, AuraEffect>,
-    pub multizone: Option<AuraMultiZone>,
-    pub awake_enabled: bool,
-    pub sleep_anim_enabled: bool,
+    pub multizone: Option<BTreeMap<AuraModeNum, Vec<AuraEffect>>>,
+    pub multizone_on: bool,
+    pub enabled: AuraPowerConfig,
 }
 
 impl Default for AuraConfig {
     fn default() -> Self {
+        let mut prod_id = String::new();
+        for prod in ASUS_KEYBOARD_DEVICES.iter() {
+            if let Ok(_) = CtrlKbdLed::find_led_node(prod) {
+                prod_id = prod.to_string();
+                break;
+            }
+        }
+
+        let enabled = if prod_id == "19b6" {
+            AuraPowerConfig::AuraDev19b6(HashSet::from([
+                AuraDev19b6::BootLogo,
+                AuraDev19b6::BootKeyb,
+                AuraDev19b6::SleepLogo,
+                AuraDev19b6::SleepKeyb,
+                AuraDev19b6::AwakeLogo,
+                AuraDev19b6::AwakeKeyb,
+                AuraDev19b6::ShutdownLogo,
+                AuraDev19b6::ShutdownKeyb,
+                AuraDev19b6::AwakeBar,
+                AuraDev19b6::BootBar,
+                AuraDev19b6::SleepBar,
+                AuraDev19b6::ShutdownBar,
+            ]))
+        } else {
+            AuraPowerConfig::AuraDev1866(HashSet::from([
+                AuraDev1866::Awake,
+                AuraDev1866::Boot,
+                AuraDev1866::Sleep,
+                AuraDev1866::Keyboard,
+                AuraDev1866::Lightbar,
+            ]))
+        };
+
         AuraConfig {
             brightness: LedBrightness::Med,
             current_mode: AuraModeNum::Static,
             builtins: BTreeMap::new(),
             multizone: None,
-            awake_enabled: true,
-            sleep_anim_enabled: true,
+            multizone_on: false,
+            enabled,
         }
     }
 }
@@ -94,19 +148,18 @@ impl AuraConfig {
             } else {
                 if let Ok(data) = serde_json::from_str(&buf) {
                     return data;
-                } else if let Ok(data) = serde_json::from_str::<AuraConfigV320>(&buf) {
-                    let config = data.into_current();
-                    config.write();
-                    info!("Updated AuraConfig version");
-                    return config;
-                } else if let Ok(data) = serde_json::from_str::<AuraConfigV352>(&buf) {
-                    let config = data.into_current();
-                    config.write();
-                    info!("Updated AuraConfig version");
-                    return config;
                 }
-                warn!("Could not deserialise {}", AURA_CONFIG_PATH);
-                panic!("Please remove {} then restart asusd", AURA_CONFIG_PATH);
+                warn!(
+                    "Could not deserialise {}.\nWill rename to {}-old and recreate config",
+                    AURA_CONFIG_PATH, AURA_CONFIG_PATH
+                );
+                let cfg_old = AURA_CONFIG_PATH.to_string() + "-old";
+                std::fs::rename(AURA_CONFIG_PATH, cfg_old).unwrap_or_else(|err| {
+                    panic!(
+                        "Could not rename. Please remove {} then restart service: Error {}",
+                        AURA_CONFIG_PATH, err
+                    )
+                });
             }
         }
         AuraConfig::create_default(&mut file, supported_led_modes)
@@ -120,6 +173,27 @@ impl AuraConfig {
             config
                 .builtins
                 .insert(*n, AuraEffect::default_with_mode(*n));
+
+            if !support_data.multizone.is_empty() {
+                let mut default = vec![];
+                for (i, tmp) in support_data.multizone.iter().enumerate() {
+                    default.push(AuraEffect {
+                        mode: *n,
+                        zone: *tmp,
+                        colour1: *GRADIENT.get(i).unwrap_or(&GRADIENT[0]),
+                        colour2: *GRADIENT.get(GRADIENT.len() - i).unwrap_or(&GRADIENT[6]),
+                        speed: Speed::Med,
+                        direction: Direction::Left,
+                    })
+                }
+                if let Some(m) = config.multizone.as_mut() {
+                    m.insert(*n, default);
+                } else {
+                    let mut tmp = BTreeMap::new();
+                    tmp.insert(*n, default);
+                    config.multizone = Some(tmp);
+                }
+            }
         }
 
         // Should be okay to unwrap this as is since it is a Default
@@ -153,115 +227,126 @@ impl AuraConfig {
             .unwrap_or_else(|err| error!("Could not write config: {}", err));
     }
 
-    /// Multipurpose, will accept AuraEffect with zones and put in the correct store
+    /// Set the mode data, current mode, and if multizone enabled.
+    ///
+    /// Multipurpose, will accept AuraEffect with zones and put in the correct store.
     pub fn set_builtin(&mut self, effect: AuraEffect) {
+        self.current_mode = effect.mode;
         match effect.zone() {
             AuraZone::None => {
                 self.builtins.insert(*effect.mode(), effect);
+                self.multizone_on = false;
             }
             _ => {
                 if let Some(multi) = self.multizone.as_mut() {
-                    multi.set(effect)
+                    if let Some(fx) = multi.get_mut(effect.mode()) {
+                        for fx in fx.iter_mut() {
+                            if fx.zone == effect.zone {
+                                *fx = effect;
+                                return;
+                            }
+                        }
+                        fx.push(effect);
+                    } else {
+                        multi.insert(*effect.mode(), vec![effect]);
+                    }
+                } else {
+                    let mut tmp = BTreeMap::new();
+                    tmp.insert(*effect.mode(), vec![effect]);
+                    self.multizone = Some(tmp);
                 }
+                self.multizone_on = true;
             }
         }
     }
 
-    pub fn get_multizone(&self, aura_type: AuraModeNum) -> Option<&[AuraEffect; 4]> {
+    pub fn get_multizone(&self, aura_type: AuraModeNum) -> Option<&[AuraEffect]> {
         if let Some(multi) = &self.multizone {
-            if aura_type == AuraModeNum::Static {
-                return Some(multi.static_());
-            } else if aura_type == AuraModeNum::Breathe {
-                return Some(multi.breathe());
-            }
+            return multi.get(&aura_type).map(|v| v.as_slice());
         }
         None
     }
 }
 
-#[derive(Deserialize, Serialize)]
-pub struct AuraMultiZone {
-    static_: [AuraEffect; 4],
-    breathe: [AuraEffect; 4],
-}
+#[cfg(test)]
+mod tests {
+    use super::AuraConfig;
+    use rog_aura::{AuraEffect, AuraModeNum, AuraZone, Colour};
 
-impl AuraMultiZone {
-    pub fn set(&mut self, effect: AuraEffect) {
-        if effect.mode == AuraModeNum::Static {
-            match effect.zone {
-                AuraZone::None => {}
-                AuraZone::One => self.static_[0] = effect,
-                AuraZone::Two => self.static_[1] = effect,
-                AuraZone::Three => self.static_[2] = effect,
-                AuraZone::Four => self.static_[3] = effect,
-            }
-        } else if effect.mode == AuraModeNum::Breathe {
-            match effect.zone {
-                AuraZone::None => {}
-                AuraZone::One => self.breathe[0] = effect,
-                AuraZone::Two => self.breathe[1] = effect,
-                AuraZone::Three => self.breathe[2] = effect,
-                AuraZone::Four => self.breathe[3] = effect,
-            }
-        }
+    #[test]
+    fn set_multizone_4key_config() {
+        let mut config = AuraConfig::default();
+
+        let mut effect = AuraEffect::default();
+        effect.colour1 = Colour(0xff, 0x00, 0xff);
+        effect.zone = AuraZone::Key1;
+        config.set_builtin(effect);
+
+        assert!(config.multizone.is_some());
+
+        let mut effect = AuraEffect::default();
+        effect.colour1 = Colour(0x00, 0xff, 0xff);
+        effect.zone = AuraZone::Key2;
+        config.set_builtin(effect);
+
+        let mut effect = AuraEffect::default();
+        effect.colour1 = Colour(0xff, 0xff, 0x00);
+        effect.zone = AuraZone::Key3;
+        config.set_builtin(effect);
+
+        let mut effect = AuraEffect::default();
+        effect.colour1 = Colour(0x00, 0xff, 0x00);
+        effect.zone = AuraZone::Key4;
+        let effect_clone = effect.clone();
+        config.set_builtin(effect);
+        // This should replace existing
+        config.set_builtin(effect_clone);
+
+        let res = config.multizone.unwrap();
+        let sta = res.get(&AuraModeNum::Static).unwrap();
+        assert_eq!(sta.len(), 4);
+        assert_eq!(sta[0].colour1, Colour(0xff, 0x00, 0xff));
+        assert_eq!(sta[1].colour1, Colour(0x00, 0xff, 0xff));
+        assert_eq!(sta[2].colour1, Colour(0xff, 0xff, 0x00));
+        assert_eq!(sta[3].colour1, Colour(0x00, 0xff, 0x00));
     }
 
-    pub fn static_(&self) -> &[AuraEffect; 4] {
-        &self.static_
-    }
+    #[test]
+    fn set_multizone_multimode_config() {
+        let mut config = AuraConfig::default();
 
-    pub fn breathe(&self) -> &[AuraEffect; 4] {
-        &self.breathe
-    }
-}
-
-impl Default for AuraMultiZone {
-    fn default() -> Self {
-        Self {
-            static_: [
-                AuraEffect {
-                    mode: AuraModeNum::Static,
-                    zone: AuraZone::One,
-                    ..Default::default()
-                },
-                AuraEffect {
-                    mode: AuraModeNum::Static,
-                    zone: AuraZone::Two,
-                    ..Default::default()
-                },
-                AuraEffect {
-                    mode: AuraModeNum::Static,
-                    zone: AuraZone::Three,
-                    ..Default::default()
-                },
-                AuraEffect {
-                    mode: AuraModeNum::Static,
-                    zone: AuraZone::Four,
-                    ..Default::default()
-                },
-            ],
-            breathe: [
-                AuraEffect {
-                    mode: AuraModeNum::Breathe,
-                    zone: AuraZone::One,
-                    ..Default::default()
-                },
-                AuraEffect {
-                    mode: AuraModeNum::Breathe,
-                    zone: AuraZone::Two,
-                    ..Default::default()
-                },
-                AuraEffect {
-                    mode: AuraModeNum::Breathe,
-                    zone: AuraZone::Three,
-                    ..Default::default()
-                },
-                AuraEffect {
-                    mode: AuraModeNum::Breathe,
-                    zone: AuraZone::Four,
-                    ..Default::default()
-                },
-            ],
-        }
+        let mut effect = AuraEffect::default();
+        effect.zone = AuraZone::Key1;
+        config.set_builtin(effect);
+
+        assert!(config.multizone.is_some());
+
+        let mut effect = AuraEffect::default();
+        effect.zone = AuraZone::Key2;
+        effect.mode = AuraModeNum::Breathe;
+        config.set_builtin(effect);
+
+        let mut effect = AuraEffect::default();
+        effect.zone = AuraZone::Key3;
+        effect.mode = AuraModeNum::Comet;
+        config.set_builtin(effect);
+
+        let mut effect = AuraEffect::default();
+        effect.zone = AuraZone::Key4;
+        effect.mode = AuraModeNum::Pulse;
+        config.set_builtin(effect);
+
+        let res = config.multizone.unwrap();
+        let sta = res.get(&AuraModeNum::Static).unwrap();
+        assert_eq!(sta.len(), 1);
+
+        let sta = res.get(&AuraModeNum::Breathe).unwrap();
+        assert_eq!(sta.len(), 1);
+
+        let sta = res.get(&AuraModeNum::Comet).unwrap();
+        assert_eq!(sta.len(), 1);
+
+        let sta = res.get(&AuraModeNum::Pulse).unwrap();
+        assert_eq!(sta.len(), 1);
     }
 }

daemon/src/ctrl_aura/controller.rs

@@ -6,38 +6,50 @@ use crate::{
     laptops::{LaptopLedData, ASUS_KEYBOARD_DEVICES},
     CtrlTask,
 };
-use log::{info, warn};
-use logind_zbus::ManagerProxy;
+use async_trait::async_trait;
+use log::{error, info, warn};
+use logind_zbus::manager::ManagerProxy;
 use rog_aura::{
-    usb::{
-        LED_APPLY, LED_AWAKE_OFF_SLEEP_OFF, LED_AWAKE_OFF_SLEEP_ON, LED_AWAKE_ON_SLEEP_OFF,
-        LED_AWAKE_ON_SLEEP_ON, LED_SET,
-    },
+    usb::{LED_APPLY, LED_SET},
     AuraEffect, LedBrightness, LED_MSG_LEN,
 };
+use rog_aura::{AuraZone, Direction, Speed, GRADIENT};
 use rog_supported::LedSupportedFunctions;
-use std::io::{Read, Write};
+use smol::{stream::StreamExt, Executor};
 use std::path::Path;
 use std::sync::Arc;
 use std::sync::Mutex;
-use std::{fs::OpenOptions, thread::spawn};
+use std::{
+    collections::BTreeMap,
+    io::{Read, Write},
+};
+use std::{fs::OpenOptions, sync::MutexGuard};
 use zbus::Connection;
 
 use crate::GetSupported;
 
-use super::config::AuraConfig;
+use super::config::{AuraConfig, AuraPowerConfig};
 
 impl GetSupported for CtrlKbdLed {
     type A = LedSupportedFunctions;
 
     fn get_supported() -> Self::A {
         // let mode = <&str>::from(&<AuraModes>::from(*mode));
-        let multizone_led_mode = false;
-        let per_key_led_mode = false;
         let laptop = LaptopLedData::get_data();
         let stock_led_modes = laptop.standard;
+        let multizone_led_mode = laptop.multizone;
+        let per_key_led_mode = laptop.per_key;
+
+        let mut prod_id = String::new();
+        for prod in ASUS_KEYBOARD_DEVICES.iter() {
+            if let Ok(_) = Self::find_led_node(prod) {
+                prod_id = prod.to_string();
+                break;
+            }
+        }
 
         LedSupportedFunctions {
+            prod_id,
             brightness_set: CtrlKbdLed::get_kbd_bright_path().is_some(),
             stock_led_modes,
             multizone_led_mode,
@@ -47,6 +59,8 @@ impl GetSupported for CtrlKbdLed {
 }
 
 pub struct CtrlKbdLed {
+    // TODO: config stores the keyboard type as an AuraPower, use or update this
+    pub led_prod: Option<String>,
     pub led_node: Option<String>,
     pub bright_node: String,
     pub supported_modes: LaptopLedData,
@@ -54,50 +68,13 @@ pub struct CtrlKbdLed {
     pub config: AuraConfig,
 }
 
-pub struct CtrlKbdLedTask<'a> {
+pub struct CtrlKbdLedTask {
     inner: Arc<Mutex<CtrlKbdLed>>,
-    _c: Connection,
-    manager: ManagerProxy<'a>,
 }
 
-impl<'a> CtrlKbdLedTask<'a> {
+impl CtrlKbdLedTask {
     pub fn new(inner: Arc<Mutex<CtrlKbdLed>>) -> Self {
-        let connection =
-            Connection::new_system().expect("CtrlKbdLedTask could not create dbus connection");
-
-        let manager =
-            ManagerProxy::new(&connection).expect("CtrlKbdLedTask could not create ManagerProxy");
-
-        let c1 = inner.clone();
-        // Run this action when the system wakes up from sleep
-        manager
-            .connect_prepare_for_sleep(move |sleep| {
-                if !sleep {
-                    let c1 = c1.clone();
-                    spawn(move || {
-                        // wait a fraction for things to wake up properly
-                        //std::thread::sleep(Duration::from_millis(100));
-                        loop {
-                            if let Ok(ref mut lock) = c1.try_lock() {
-                                lock.set_brightness(lock.config.brightness).ok();
-                                break;
-                            }
-                        }
-                    });
-                }
-                Ok(())
-            })
-            .map_err(|err| {
-                warn!("CtrlAnimeTask: new() {}", err);
-                err
-            })
-            .ok();
-
-        Self {
-            inner,
-            _c: connection,
-            manager,
-        }
+        Self { inner }
     }
 
     fn update_config(lock: &mut CtrlKbdLed) -> Result<(), RogError> {
@@ -125,12 +102,70 @@ impl<'a> CtrlKbdLedTask<'a> {
     }
 }
 
-impl<'a> CtrlTask for CtrlKbdLedTask<'a> {
-    fn do_task(&self) -> Result<(), RogError> {
-        self.manager.next_signal()?;
-        if let Ok(ref mut lock) = self.inner.try_lock() {
-            return Self::update_config(lock);
-        }
+#[async_trait]
+impl CtrlTask for CtrlKbdLedTask {
+    async fn create_tasks(&self, executor: &mut Executor) -> Result<(), RogError> {
+        let connection = Connection::system()
+            .await
+            .expect("CtrlKbdLedTask could not create dbus connection");
+
+        let manager = ManagerProxy::new(&connection)
+            .await
+            .expect("CtrlKbdLedTask could not create ManagerProxy");
+
+        let load_save = |start: bool, mut lock: MutexGuard<CtrlKbdLed>| {
+            // If waking up
+            if !start {
+                info!("CtrlKbdLedTask reloading brightness and modes");
+                lock.set_brightness(lock.config.brightness)
+                    .map_err(|e| error!("CtrlKbdLedTask: {e}"))
+                    .ok();
+                lock.write_current_config_mode()
+                    .map_err(|e| error!("CtrlKbdLedTask: {e}"))
+                    .ok();
+            } else if start {
+                info!("CtrlKbdLedTask saving last brightness");
+                Self::update_config(&mut lock)
+                    .map_err(|e| error!("CtrlKbdLedTask: {e}"))
+                    .ok();
+            }
+        };
+
+        let inner = self.inner.clone();
+        executor
+            .spawn(async move {
+                if let Ok(notif) = manager.receive_prepare_for_sleep().await {
+                    notif
+                        .for_each(|event| {
+                            if let Ok(args) = event.args() {
+                                loop {
+                                    // Loop so that we do aquire the lock but also don't block other
+                                    // threads (prevents potential deadlocks)
+                                    if let Ok(lock) = inner.clone().try_lock() {
+                                        load_save(args.start, lock);
+                                        break;
+                                    }
+                                }
+                            }
+                        })
+                        .await;
+                }
+                if let Ok(notif) = manager.receive_prepare_for_shutdown().await {
+                    notif
+                        .for_each(|event| {
+                            if let Ok(args) = event.args() {
+                                loop {
+                                    if let Ok(lock) = inner.clone().try_lock() {
+                                        load_save(args.start, lock);
+                                        break;
+                                    }
+                                }
+                            }
+                        })
+                        .await;
+                }
+            })
+            .detach();
         Ok(())
     }
 }
@@ -140,13 +175,9 @@ pub struct CtrlKbdLedReloader(pub Arc<Mutex<CtrlKbdLed>>);
 impl crate::Reloadable for CtrlKbdLedReloader {
     fn reload(&mut self) -> Result<(), RogError> {
         if let Ok(mut ctrl) = self.0.try_lock() {
-            let current = ctrl.config.current_mode;
-            if let Some(mode) = ctrl.config.builtins.get(&current).cloned() {
-                ctrl.do_command(mode).ok();
-            }
-
-            ctrl.set_states_enabled(ctrl.config.awake_enabled, ctrl.config.sleep_anim_enabled)
-                .map_err(|err| warn!("{}", err))
+            ctrl.write_current_config_mode()?;
+            ctrl.set_power_states(&ctrl.config)
+                .map_err(|err| warn!("{err}"))
                 .ok();
         }
         Ok(())
@@ -162,27 +193,26 @@ impl CtrlKbdLedZbus {
 }
 
 impl CtrlKbdLed {
-    #[inline]
     pub fn new(supported_modes: LaptopLedData, config: AuraConfig) -> Result<Self, RogError> {
         // TODO: return error if *all* nodes are None
+        let mut led_prod = None;
         let mut led_node = None;
         for prod in ASUS_KEYBOARD_DEVICES.iter() {
             match Self::find_led_node(prod) {
                 Ok(node) => {
+                    led_prod = Some(prod.to_string());
                     led_node = Some(node);
+                    info!("Looked for keyboard controller 0x{prod}: Found");
                     break;
                 }
-                Err(err) => warn!("led_node: {}", err),
+                Err(err) => info!("Looked for keyboard controller 0x{prod}: {err}"),
             }
         }
 
         let bright_node = Self::get_kbd_bright_path();
 
-        if led_node.is_none() && bright_node.is_none() {
-            return Err(RogError::MissingFunction(
-                "All keyboard features missing, you may require a v5.11 series kernel or newer"
-                    .into(),
-            ));
+        if led_node.is_none() {
+            return Err(RogError::NoAuraKeyboard);
         }
 
         if bright_node.is_none() {
@@ -192,6 +222,7 @@ impl CtrlKbdLed {
         }
 
         let ctrl = CtrlKbdLed {
+            led_prod,
             led_node,
             bright_node: bright_node.unwrap(), // If was none then we already returned above
             supported_modes,
@@ -263,27 +294,19 @@ impl CtrlKbdLed {
         self.set_brightness(self.config.brightness)
     }
 
-    /// Set if awake/on LED active, and/or sleep animation active
-    pub(super) fn set_states_enabled(&self, awake: bool, sleep: bool) -> Result<(), RogError> {
-        let bytes = if awake && sleep {
-            LED_AWAKE_ON_SLEEP_ON
-        } else if awake && !sleep {
-            LED_AWAKE_ON_SLEEP_OFF
-        } else if !awake && sleep {
-            LED_AWAKE_OFF_SLEEP_ON
-        } else if !awake && !sleep {
-            LED_AWAKE_OFF_SLEEP_OFF
-        } else {
-            LED_AWAKE_ON_SLEEP_ON
-        };
-        self.write_bytes(&bytes)?;
+    /// Set combination state for boot animation/sleep animation/all leds/keys leds/side leds LED active
+    pub(super) fn set_power_states(&self, config: &AuraConfig) -> Result<(), RogError> {
+        let bytes = AuraPowerConfig::to_bytes(&config.enabled);
+        let message = [0x5d, 0xbd, 0x01, bytes[0], bytes[1], bytes[2]];
+
+        self.write_bytes(&message)?;
         self.write_bytes(&LED_SET)?;
         // Changes won't persist unless apply is set
         self.write_bytes(&LED_APPLY)?;
         Ok(())
     }
 
-    fn find_led_node(id_product: &str) -> Result<String, RogError> {
+    pub(crate) fn find_led_node(id_product: &str) -> Result<String, RogError> {
         let mut enumerator = udev::Enumerator::new().map_err(|err| {
             warn!("{}", err);
             RogError::Udev("enumerator failed".into(), err)
@@ -321,12 +344,27 @@ impl CtrlKbdLed {
         ))
     }
 
-    pub(crate) fn do_command(&mut self, mode: AuraEffect) -> Result<(), RogError> {
-        self.set_and_save(mode)
+    /// Set an Aura effect if the effect mode or zone is supported.
+    ///
+    /// On success the aura config file is read to refresh cached values, then the effect is
+    /// stored and config written to disk.
+    pub(crate) fn set_effect(&mut self, effect: AuraEffect) -> Result<(), RogError> {
+        if !self.supported_modes.standard.contains(&effect.mode) {
+            return Err(RogError::AuraEffectNotSupported);
+        } else if effect.zone != AuraZone::None
+            && !self.supported_modes.multizone.contains(&effect.zone)
+        {
+            return Err(RogError::AuraEffectNotSupported);
+        }
+
+        self.write_mode(&effect)?;
+        self.config.read(); // refresh config if successful
+        self.config.set_builtin(effect);
+        self.config.write();
+        Ok(())
     }
 
     /// Should only be used if the bytes you are writing are verified correct
-    #[inline]
     fn write_bytes(&self, message: &[u8]) -> Result<(), RogError> {
         if let Some(led_node) = &self.led_node {
             if let Ok(mut file) = OpenOptions::new().write(true).open(led_node) {
@@ -336,11 +374,10 @@ impl CtrlKbdLed {
                     .map_err(|err| RogError::Write("write_bytes".into(), err));
             }
         }
-        Err(RogError::NotSupported)
+        Err(RogError::NoAuraNode)
     }
 
-    /// Write an effect block
-    #[inline]
+    /// Write an effect block. This is for per-key
     fn _write_effect(&mut self, effect: &[Vec<u8>]) -> Result<(), RogError> {
         if self.flip_effect_write {
             for row in effect.iter().rev() {
@@ -355,20 +392,6 @@ impl CtrlKbdLed {
         Ok(())
     }
 
-    /// Used to set a builtin mode and save the settings for it
-    ///
-    /// This needs to be universal so that settings applied by dbus stick
-    #[inline]
-    fn set_and_save(&mut self, mode: AuraEffect) -> Result<(), RogError> {
-        self.config.read();
-        self.write_mode(&mode)?;
-        self.config.current_mode = *mode.mode();
-        self.config.set_builtin(mode);
-        self.config.write();
-        Ok(())
-    }
-
-    #[inline]
     pub(super) fn toggle_mode(&mut self, reverse: bool) -> Result<(), RogError> {
         let current = self.config.current_mode;
         if let Some(idx) = self
@@ -394,21 +417,17 @@ impl CtrlKbdLed {
             let next = self.supported_modes.standard[idx];
 
             self.config.read();
-            if let Some(data) = self.config.builtins.get(&next) {
-                self.write_mode(data)?;
+            // if self.config.builtins.contains_key(&next) {
                 self.config.current_mode = next;
-            }
+                self.write_current_config_mode()?;
+            // }
             self.config.write();
         }
 
         Ok(())
     }
 
-    #[inline]
     fn write_mode(&self, mode: &AuraEffect) -> Result<(), RogError> {
-        if !self.supported_modes.standard.contains(mode.mode()) {
-            return Err(RogError::NotSupported);
-        }
         let bytes: [u8; LED_MSG_LEN] = mode.into();
         self.write_bytes(&bytes)?;
         self.write_bytes(&LED_SET)?;
@@ -416,4 +435,217 @@ impl CtrlKbdLed {
         self.write_bytes(&LED_APPLY)?;
         Ok(())
     }
+
+    fn write_current_config_mode(&mut self) -> Result<(), RogError> {
+        if self.config.multizone_on {
+            let mode = self.config.current_mode;
+            let mut create = false;
+            // There is no multizone config for this mode so create one here
+            // using the colours of rainbow if it exists, or first available
+            // mode, or random
+            if self.config.multizone.is_none() {
+                create = true;
+            } else if let Some(multizones) = self.config.multizone.as_ref() {
+                if !multizones.contains_key(&mode) {
+                    create = true;
+                }
+            }
+            if create {
+                info!("No user-set config for zone founding, attempting a default");
+                self.create_multizone_default()?;
+            }
+
+            if let Some(multizones) = self.config.multizone.as_ref() {
+                if let Some(set) = multizones.get(&mode) {
+                    for mode in set {
+                        self.write_mode(mode)?;
+                    }
+                }
+            }
+        } else {
+            let mode = self.config.current_mode;
+            if let Some(effect) = self.config.builtins.get(&mode) {
+                self.write_mode(effect)?;
+            }
+        }
+
+        Ok(())
+    }
+
+    /// Create a default for the `current_mode` if multizone and no config exists.
+    fn create_multizone_default(&mut self) -> Result<(), RogError> {
+        let mut default = vec![];
+        for (i, tmp) in self.supported_modes.multizone.iter().enumerate() {
+            default.push(AuraEffect {
+                mode: self.config.current_mode,
+                zone: *tmp,
+                colour1: *GRADIENT.get(i).unwrap_or(&GRADIENT[0]),
+                colour2: *GRADIENT.get(GRADIENT.len() - i).unwrap_or(&GRADIENT[6]),
+                speed: Speed::Med,
+                direction: Direction::Left,
+            })
+        }
+        if default.is_empty() {
+            return Err(RogError::AuraEffectNotSupported);
+        }
+
+        if let Some(multizones) = self.config.multizone.as_mut() {
+            multizones.insert(self.config.current_mode, default);
+        } else {
+            let mut tmp = BTreeMap::new();
+            tmp.insert(self.config.current_mode, default);
+            self.config.multizone = Some(tmp);
+        }
+        Ok(())
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use rog_aura::{AuraEffect, AuraModeNum, AuraZone, Colour};
+
+    use crate::{ctrl_aura::config::AuraConfig, laptops::LaptopLedData};
+
+    use super::CtrlKbdLed;
+
+    #[test]
+    // #[ignore = "Must be manually run due to detection stage"]
+    fn check_set_mode_errors() {
+        // Checking to ensure set_mode errors when unsupported modes are tried
+        let config = AuraConfig::default();
+        let supported_modes = LaptopLedData {
+            prod_family: "".into(),
+            board_names: vec![],
+            standard: vec![AuraModeNum::Static],
+            multizone: vec![],
+            per_key: false,
+        };
+        let mut controller = CtrlKbdLed {
+            led_prod: None,
+            led_node: None,
+            bright_node: String::new(),
+            supported_modes,
+            flip_effect_write: false,
+            config,
+        };
+
+        let mut effect = AuraEffect::default();
+        effect.colour1 = Colour(0xff, 0x00, 0xff);
+        effect.zone = AuraZone::None;
+
+        // This error comes from write_bytes because we don't have a keyboard node stored
+        assert_eq!(
+            controller
+                .set_effect(effect.clone())
+                .unwrap_err()
+                .to_string(),
+            "No Aura keyboard node found"
+        );
+
+        effect.mode = AuraModeNum::Laser;
+        assert_eq!(
+            controller
+                .set_effect(effect.clone())
+                .unwrap_err()
+                .to_string(),
+            "Aura effect not supported"
+        );
+
+        effect.mode = AuraModeNum::Static;
+        effect.zone = AuraZone::Key2;
+        assert_eq!(
+            controller
+                .set_effect(effect.clone())
+                .unwrap_err()
+                .to_string(),
+            "Aura effect not supported"
+        );
+
+        controller.supported_modes.multizone.push(AuraZone::Key2);
+        assert_eq!(
+            controller
+                .set_effect(effect.clone())
+                .unwrap_err()
+                .to_string(),
+            "No Aura keyboard node found"
+        );
+    }
+
+    #[test]
+    fn create_multizone_if_no_config() {
+        // Checking to ensure set_mode errors when unsupported modes are tried
+        let config = AuraConfig::default();
+        let supported_modes = LaptopLedData {
+            prod_family: "".into(),
+            board_names: vec![],
+            standard: vec![AuraModeNum::Static],
+            multizone: vec![],
+            per_key: false,
+        };
+        let mut controller = CtrlKbdLed {
+            led_prod: None,
+            led_node: None,
+            bright_node: String::new(),
+            supported_modes,
+            flip_effect_write: false,
+            config,
+        };
+
+        assert!(controller.config.multizone.is_none());
+        assert!(controller.create_multizone_default().is_err());
+        assert!(controller.config.multizone.is_none());
+
+        controller.supported_modes.multizone.push(AuraZone::Key1);
+        controller.supported_modes.multizone.push(AuraZone::Key2);
+        assert!(controller.create_multizone_default().is_ok());
+        assert!(controller.config.multizone.is_some());
+
+        let m = controller.config.multizone.unwrap();
+        assert!(m.contains_key(&AuraModeNum::Static));
+        let e = m.get(&AuraModeNum::Static).unwrap();
+        assert_eq!(e.len(), 2);
+        assert_eq!(e[0].zone, AuraZone::Key1);
+        assert_eq!(e[1].zone, AuraZone::Key2);
+    }
+
+    #[test]
+    fn next_mode_create_multizone_if_no_config() {
+        // Checking to ensure set_mode errors when unsupported modes are tried
+        let config = AuraConfig::default();
+        let supported_modes = LaptopLedData {
+            prod_family: "".into(),
+            board_names: vec![],
+            standard: vec![AuraModeNum::Static],
+            multizone: vec![AuraZone::Key1, AuraZone::Key2],
+            per_key: false,
+        };
+        let mut controller = CtrlKbdLed {
+            led_prod: None,
+            led_node: None,
+            bright_node: String::new(),
+            supported_modes,
+            flip_effect_write: false,
+            config,
+        };
+
+        assert!(controller.config.multizone.is_none());
+        controller.config.multizone_on = true;
+        // This is called in toggle_mode. It will error here because we have no
+        // keyboard node in tests.
+        assert_eq!(
+            controller
+                .write_current_config_mode()
+                .unwrap_err()
+                .to_string(),
+            "No Aura keyboard node found"
+        );
+        assert!(controller.config.multizone.is_some());
+
+        let m = controller.config.multizone.unwrap();
+        assert!(m.contains_key(&AuraModeNum::Static));
+        let e = m.get(&AuraModeNum::Static).unwrap();
+        assert_eq!(e.len(), 2);
+        assert_eq!(e[0].zone, AuraZone::Key1);
+        assert_eq!(e[1].zone, AuraZone::Key2);
+    }
 }

daemon/src/ctrl_aura/zbus.rs

@@ -1,18 +1,14 @@
-use log::{error, warn};
-use rog_aura::{AuraEffect, LedBrightness, LedPowerStates};
-use zbus::dbus_interface;
-use zvariant::ObjectPath;
+use async_trait::async_trait;
+use log::warn;
+use rog_aura::{usb::AuraPowerDev, AuraEffect, LedBrightness, AuraModeNum};
+use zbus::{dbus_interface, Connection, SignalContext};
 
 use super::controller::CtrlKbdLedZbus;
 
+#[async_trait]
 impl crate::ZbusAdd for CtrlKbdLedZbus {
-    fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(&ObjectPath::from_str_unchecked("/org/asuslinux/Led"), self)
-            .map_err(|err| {
-                error!("DbusKbdLed: add_to_server {}", err);
-            })
-            .ok();
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/Aura", server).await;
     }
 }
 
@@ -22,7 +18,7 @@ impl crate::ZbusAdd for CtrlKbdLedZbus {
 #[dbus_interface(name = "org.asuslinux.Daemon")]
 impl CtrlKbdLedZbus {
     /// Set the keyboard brightness level (0-3)
-    fn set_brightness(&mut self, brightness: LedBrightness) {
+    async fn set_brightness(&mut self, brightness: LedBrightness) {
         if let Ok(ctrl) = self.0.try_lock() {
             ctrl.set_brightness(brightness)
                 .map_err(|err| warn!("{}", err))
@@ -30,128 +26,165 @@ impl CtrlKbdLedZbus {
         }
     }
 
-    /// Set the keyboard LED to enabled while the device is awake
-    fn set_awake_enabled(&mut self, enabled: bool) {
+    /// Set a variety of states, input is array of enum.
+    ///
+    /// enum AuraControl {
+    ///     BootLogo,
+    ///     BootKeyb,
+    ///     AwakeLogo,
+    ///     AwakeKeyb,
+    ///     SleepLogo,
+    ///     SleepKeyb,
+    ///     ShutdownLogo,
+    ///     ShutdownKeyb,
+    ///     AwakeBar,
+    ///     BootBar,
+    ///     SleepBar,
+    ///     ShutdownBar,
+    /// }
+    async fn set_leds_power(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        options: AuraPowerDev,
+        enabled: bool,
+    ) -> zbus::fdo::Result<()> {
+        let mut states = None;
         if let Ok(mut ctrl) = self.0.try_lock() {
-            ctrl.set_states_enabled(enabled, ctrl.config.sleep_anim_enabled)
-                .map_err(|err| warn!("{}", err))
-                .ok();
-            ctrl.config.awake_enabled = enabled;
+            for p in options.x1866 {
+                ctrl.config.enabled.set_0x1866(p, enabled);
+            }
+            for p in options.x19b6 {
+                ctrl.config.enabled.set_0x19b6(p, enabled);
+            }
+
             ctrl.config.write();
 
-            let states = LedPowerStates {
-                enabled: ctrl.config.awake_enabled,
-                sleep_anim_enabled: ctrl.config.sleep_anim_enabled,
-            };
-            self.notify_power_states(&states)
+            ctrl.set_power_states(&ctrl.config).map_err(|e| {
+                warn!("{}", e);
+                e
+            })?;
+
+            states = Some(AuraPowerDev::from(&ctrl.config.enabled));
+        }
+        // Need to pull state out like this due to MutexGuard
+        if let Some(states) = states {
+            Self::notify_power_states(&ctxt, &states)
+                .await
                 .unwrap_or_else(|err| warn!("{}", err));
         }
+        Ok(())
     }
 
-    /// Set the keyboard LED suspend animation to enabled while the device is suspended
-    fn set_sleep_enabled(&mut self, enabled: bool) {
+    async fn set_led_mode(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        effect: AuraEffect,
+    ) -> zbus::fdo::Result<()> {
+        let mut led = None;
         if let Ok(mut ctrl) = self.0.try_lock() {
-            ctrl.set_states_enabled(ctrl.config.awake_enabled, enabled)
-                .map_err(|err| warn!("{}", err))
-                .ok();
-            ctrl.config.sleep_anim_enabled = enabled;
-            ctrl.config.write();
-            let states = LedPowerStates {
-                enabled: ctrl.config.awake_enabled,
-                sleep_anim_enabled: ctrl.config.sleep_anim_enabled,
-            };
-            self.notify_power_states(&states)
-                .unwrap_or_else(|err| warn!("{}", err));
-        }
-    }
-
-    fn set_led_mode(&mut self, effect: AuraEffect) {
-        if let Ok(mut ctrl) = self.0.try_lock() {
-            match ctrl.do_command(effect) {
-                Ok(_) => {
-                    if let Some(mode) = ctrl.config.builtins.get(&ctrl.config.current_mode) {
-                        self.notify_led(mode.clone())
-                            .unwrap_or_else(|err| warn!("{}", err));
-                    }
-                }
-                Err(err) => {
-                    warn!("{}", err);
-                }
+            ctrl.set_effect(effect).map_err(|e| {
+                warn!("{}", e);
+                e
+            })?;
+            if let Some(mode) = ctrl.config.builtins.get(&ctrl.config.current_mode) {
+                led = Some(mode.clone());
             }
         }
+        if let Some(led) = led {
+            Self::notify_led(&ctxt, led)
+                .await
+                .unwrap_or_else(|err| warn!("{}", err));
+        }
+        Ok(())
     }
 
-    fn next_led_mode(&self) {
-        if let Ok(mut ctrl) = self.0.try_lock() {
-            ctrl.toggle_mode(false)
-                .unwrap_or_else(|err| warn!("{}", err));
+    async fn next_led_mode(
+        &self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+    ) -> zbus::fdo::Result<()> {
+        let mut led = None;
+        if let Ok(mut ctrl) = self.0.lock() {
+            ctrl.toggle_mode(false).map_err(|e| {
+                warn!("{}", e);
+                e
+            })?;
 
             if let Some(mode) = ctrl.config.builtins.get(&ctrl.config.current_mode) {
-                self.notify_led(mode.clone())
-                    .unwrap_or_else(|err| warn!("{}", err));
+                led = Some(mode.clone());
             }
         }
+        if let Some(led) = led {
+            Self::notify_led(&ctxt, led)
+                .await
+                .unwrap_or_else(|err| warn!("{}", err));
+        }
+        Ok(())
     }
 
-    fn prev_led_mode(&self) {
-        if let Ok(mut ctrl) = self.0.try_lock() {
-            ctrl.toggle_mode(true)
-                .unwrap_or_else(|err| warn!("{}", err));
+    async fn prev_led_mode(
+        &self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+    ) -> zbus::fdo::Result<()> {
+        let mut led = None;
+        if let Ok(mut ctrl) = self.0.lock() {
+            ctrl.toggle_mode(true).map_err(|e| {
+                warn!("{}", e);
+                e
+            })?;
 
             if let Some(mode) = ctrl.config.builtins.get(&ctrl.config.current_mode) {
-                self.notify_led(mode.clone())
-                    .unwrap_or_else(|err| warn!("{}", err));
+                led = Some(mode.clone());
             }
         }
-    }
-
-    fn next_led_brightness(&self) {
-        if let Ok(mut ctrl) = self.0.try_lock() {
-            ctrl.next_brightness()
+        if let Some(led) = led {
+            Self::notify_led(&ctxt, led)
+                .await
                 .unwrap_or_else(|err| warn!("{}", err));
         }
+        Ok(())
     }
 
-    fn prev_led_brightness(&self) {
+    async fn next_led_brightness(&self) -> zbus::fdo::Result<()> {
         if let Ok(mut ctrl) = self.0.try_lock() {
-            ctrl.prev_brightness()
-                .unwrap_or_else(|err| warn!("{}", err));
+            ctrl.next_brightness().map_err(|e| {
+                warn!("{}", e);
+                e
+            })?;
         }
+        Ok(())
     }
 
-    #[dbus_interface(property)]
-    fn awake_enabled(&self) -> bool {
-        if let Ok(ctrl) = self.0.try_lock() {
-            return ctrl.config.awake_enabled;
+    async fn prev_led_brightness(&self) -> zbus::fdo::Result<()> {
+        if let Ok(mut ctrl) = self.0.try_lock() {
+            ctrl.prev_brightness().map_err(|e| {
+                warn!("{}", e);
+                e
+            })?;
         }
-        true
+        Ok(())
     }
 
-    #[dbus_interface(property)]
-    fn sleep_enabled(&self) -> bool {
-        if let Ok(ctrl) = self.0.try_lock() {
-            return ctrl.config.sleep_anim_enabled;
+    // As property doesn't work for AuraPowerDev (complexity of serialization?)
+    // #[dbus_interface(property)]
+    async fn leds_power(&self) -> AuraPowerDev {
+        loop {
+            if let Ok(ctrl) = self.0.try_lock() {
+                return AuraPowerDev::from(&ctrl.config.enabled);
+            }
         }
-        true
     }
 
     /// Return the current mode data
-    #[dbus_interface(property)]
-    fn led_mode(&self) -> String {
+    async fn led_mode(&self) -> AuraModeNum {
         if let Ok(ctrl) = self.0.try_lock() {
-            if let Some(mode) = ctrl.config.builtins.get(&ctrl.config.current_mode) {
-                if let Ok(json) = serde_json::to_string(&mode) {
-                    return json;
-                }
-            }
+            return ctrl.config.current_mode;
         }
-        warn!("SetKeyBacklight could not deserialise");
-        "SetKeyBacklight could not deserialise".to_string()
+        AuraModeNum::Static
     }
 
     /// Return a list of available modes
     #[dbus_interface(property)]
-    fn led_modes(&self) -> String {
+    async fn led_modes(&self) -> String {
         if let Ok(ctrl) = self.0.try_lock() {
             if let Ok(json) = serde_json::to_string(&ctrl.config.builtins) {
                 return json;
@@ -163,7 +196,7 @@ impl CtrlKbdLedZbus {
 
     /// Return the current LED brightness
     #[dbus_interface(property)]
-    fn led_brightness(&self) -> i8 {
+    async fn led_brightness(&self) -> i8 {
         if let Ok(ctrl) = self.0.try_lock() {
             return ctrl.get_brightness().map(|n| n as i8).unwrap_or(-1);
         }
@@ -172,8 +205,11 @@ impl CtrlKbdLedZbus {
     }
 
     #[dbus_interface(signal)]
-    fn notify_led(&self, data: AuraEffect) -> zbus::Result<()>;
+    async fn notify_led(signal_ctxt: &SignalContext<'_>, data: AuraEffect) -> zbus::Result<()>;
 
     #[dbus_interface(signal)]
-    fn notify_power_states(&self, data: &LedPowerStates) -> zbus::Result<()>;
+    async fn notify_power_states(
+        signal_ctxt: &SignalContext<'_>,
+        data: &AuraPowerDev,
+    ) -> zbus::Result<()>;
 }

daemon/src/ctrl_charge.rs

@@ -1,14 +1,19 @@
+use crate::CtrlTask;
 use crate::{config::Config, error::RogError, GetSupported};
-//use crate::dbus::DbusEvents;
+use async_trait::async_trait;
 use log::{info, warn};
+use logind_zbus::manager::ManagerProxy;
 use rog_supported::ChargeSupportedFunctions;
+use smol::stream::StreamExt;
+use smol::Executor;
 use std::fs::OpenOptions;
 use std::io::Write;
 use std::path::Path;
 use std::sync::Arc;
 use std::sync::Mutex;
 use zbus::dbus_interface;
-use zvariant::ObjectPath;
+use zbus::Connection;
+use zbus::SignalContext;
 
 static BAT_CHARGE_PATH0: &str = "/sys/class/power_supply/BAT0/charge_control_end_threshold";
 static BAT_CHARGE_PATH1: &str = "/sys/class/power_supply/BAT1/charge_control_end_threshold";
@@ -30,24 +35,27 @@ pub struct CtrlCharge {
 
 #[dbus_interface(name = "org.asuslinux.Daemon")]
 impl CtrlCharge {
-    pub fn set_limit(&mut self, limit: u8) {
+    async fn set_limit(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        limit: u8,
+    ) -> zbus::fdo::Result<()> {
+        if !(20..=100).contains(&limit) {
+            return Err(RogError::ChargeLimit(limit))?;
+        }
         if let Ok(mut config) = self.config.try_lock() {
-            self.set(limit, &mut config)
-                .map_err(|err| {
-                    warn!("CtrlCharge: set_limit {}", err);
-                    err
-                })
-                .ok();
-            self.notify_charge(limit)
+            Self::set(limit, &mut config)
                 .map_err(|err| {
                     warn!("CtrlCharge: set_limit {}", err);
                     err
                 })
                 .ok();
         }
+        Self::notify_charge(&ctxt, limit).await?;
+        Ok(())
     }
 
-    pub fn limit(&self) -> i8 {
+    fn limit(&self) -> i8 {
         if let Ok(config) = self.config.try_lock() {
             return config.bat_charge_limit as i8;
         }
@@ -55,21 +63,13 @@ impl CtrlCharge {
     }
 
     #[dbus_interface(signal)]
-    pub fn notify_charge(&self, limit: u8) -> zbus::Result<()> {}
+    async fn notify_charge(ctxt: &SignalContext<'_>, limit: u8) -> zbus::Result<()>;
 }
 
+#[async_trait]
 impl crate::ZbusAdd for CtrlCharge {
-    fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(
-                &ObjectPath::from_str_unchecked("/org/asuslinux/Charge"),
-                self,
-            )
-            .map_err(|err| {
-                warn!("CtrlCharge: add_to_server {}", err);
-                err
-            })
-            .ok();
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/Charge", server).await;
     }
 }
 
@@ -77,7 +77,7 @@ impl crate::Reloadable for CtrlCharge {
     fn reload(&mut self) -> Result<(), RogError> {
         if let Ok(mut config) = self.config.try_lock() {
             config.read();
-            self.set(config.bat_charge_limit, &mut config)?;
+            Self::set(config.bat_charge_limit, &mut config)?;
         }
         Ok(())
     }
@@ -104,12 +104,9 @@ impl CtrlCharge {
         }
     }
 
-    pub(super) fn set(&self, limit: u8, config: &mut Config) -> Result<(), RogError> {
+    pub(super) fn set(limit: u8, config: &mut Config) -> Result<(), RogError> {
         if !(20..=100).contains(&limit) {
-            warn!(
-                "Unable to set battery charge limit, must be between 20-100: requested {}",
-                limit
-            );
+            return Err(RogError::ChargeLimit(limit));
         }
 
         let path = Self::get_battery_path()?;
@@ -129,3 +126,76 @@ impl CtrlCharge {
         Ok(())
     }
 }
+
+#[async_trait]
+impl CtrlTask for CtrlCharge {
+    async fn create_tasks(&self, executor: &mut Executor) -> Result<(), RogError> {
+        let connection = Connection::system()
+            .await
+            .expect("CtrlCharge could not create dbus connection");
+
+        let manager = ManagerProxy::new(&connection)
+            .await
+            .expect("CtrlCharge could not create ManagerProxy");
+
+        let config1 = self.config.clone();
+        executor
+            .spawn(async move {
+                if let Ok(notif) = manager.receive_prepare_for_sleep().await {
+                    notif
+                        .for_each(|event| {
+                            if let Ok(args) = event.args() {
+                                // If waking up
+                                if !args.start {
+                                    info!("CtrlCharge reloading charge limit");
+                                    if let Ok(mut lock) = config1.try_lock() {
+                                        Self::set(lock.bat_charge_limit, &mut lock)
+                                            .map_err(|err| {
+                                                warn!("CtrlCharge: set_limit {}", err);
+                                                err
+                                            })
+                                            .ok();
+                                    }
+                                }
+                            }
+                        })
+                        .await;
+                }
+            })
+            .detach();
+
+        let manager = ManagerProxy::new(&connection)
+            .await
+            .expect("CtrlCharge could not create ManagerProxy");
+
+        let config = self.config.clone();
+        executor
+            .spawn(async move {
+                if let Ok(notif) = manager.receive_prepare_for_shutdown().await {
+                    notif
+                        .for_each(|event| {
+                            if let Ok(args) = event.args() {
+                                // If waking up - intention is to catch hibernation event
+                                if !args.start {
+                                    info!("CtrlCharge reloading charge limit");
+                                    loop {
+                                        if let Ok(mut lock) = config.clone().try_lock() {
+                                            Self::set(lock.bat_charge_limit, &mut lock)
+                                                .map_err(|err| {
+                                                    warn!("CtrlCharge: set_limit {}", err);
+                                                    err
+                                                })
+                                                .ok();
+                                            break;
+                                        }
+                                    }
+                                }
+                            }
+                        })
+                        .await;
+                }
+            })
+            .detach();
+        Ok(())
+    }
+}

daemon/src/ctrl_profiles/config.rs

@@ -1,5 +1,4 @@
 use log::{error, warn};
-use rog_profiles::fan_curve_set::FanCurveSet;
 use rog_profiles::{FanCurveProfiles, Profile};
 use serde_derive::{Deserialize, Serialize};
 use std::fs::{File, OpenOptions};
@@ -17,20 +16,22 @@ pub struct ProfileConfig {
 
 impl ProfileConfig {
     fn new(config_path: String) -> Self {
-        let mut platform = ProfileConfig {
+        Self {
             config_path,
-            active_profile: Profile::get_active_profile().unwrap_or(Profile::Balanced),
+            active_profile: Profile::Balanced,
             fan_curves: None,
-        };
+        }
+    }
 
-        if let Ok(res) = FanCurveSet::is_supported() {
+    pub fn set_defaults_and_save(&mut self) {
+        self.active_profile = Profile::get_active_profile().unwrap_or(Profile::Balanced);
+        if let Ok(res) = FanCurveProfiles::is_supported() {
             if res {
                 let curves = FanCurveProfiles::default();
-                platform.fan_curves = Some(curves);
+                self.fan_curves = Some(curves);
             }
         }
-
-        platform
+        self.write();
     }
 
     pub fn load(config_path: String) -> Self {
@@ -45,17 +46,29 @@ impl ProfileConfig {
         if let Ok(read_len) = file.read_to_string(&mut buf) {
             if read_len == 0 {
                 config = Self::new(config_path);
+                config.set_defaults_and_save();
             } else if let Ok(data) = toml::from_str(&buf) {
                 config = data;
                 config.config_path = config_path;
             } else {
-                warn!("Could not deserialise {}", config_path);
-                panic!("Please remove {} then restart service", config_path);
+                warn!(
+                    "Could not deserialise {}.\nWill rename to {}-old and recreate config",
+                    config_path, config_path
+                );
+                let cfg_old = config_path.clone() + "-old";
+                std::fs::rename(config_path.clone(), cfg_old).unwrap_or_else(|err| {
+                    panic!(
+                        "Could not rename. Please remove {} then restart service: Error {}",
+                        config_path, err
+                    )
+                });
+                config = Self::new(config_path);
+                config.set_defaults_and_save();
             }
         } else {
-            config = Self::new(config_path)
+            config = Self::new(config_path);
+            config.set_defaults_and_save();
         }
-        config.write();
         config
     }
 

daemon/src/ctrl_profiles/controller.rs

@@ -1,17 +1,18 @@
+use std::sync::{Arc, Mutex};
+
 use crate::error::RogError;
-use crate::GetSupported;
+use crate::{CtrlTask, GetSupported};
+use async_trait::async_trait;
 use log::{info, warn};
 use rog_profiles::error::ProfileError;
-use rog_profiles::fan_curve_set::FanCurveSet;
-use rog_profiles::Profile;
+use rog_profiles::{FanCurveProfiles, Profile};
 use rog_supported::PlatformProfileFunctions;
-use udev::Device;
+use smol::Executor;
 
 use super::config::ProfileConfig;
 
 pub struct CtrlPlatformProfile {
     pub config: ProfileConfig,
-    pub fan_device: Option<Device>,
 }
 
 impl GetSupported for CtrlPlatformProfile {
@@ -22,25 +23,24 @@ impl GetSupported for CtrlPlatformProfile {
             warn!(
                 r#"
 platform_profile kernel interface not found, your laptop does not support this, or the interface is missing.
-To enable profile support you require a kernel with the following patch applied:
-https://lkml.org/lkml/2021/8/18/1022
+To enable profile support you require a kernel version 5.15.2 minimum.
 "#
             );
         }
 
-        let res = FanCurveSet::is_supported();
+        let res = FanCurveProfiles::is_supported();
         let mut fan_curve_supported = res.is_err();
         if let Ok(r) = res {
             fan_curve_supported = r;
         };
 
-        if fan_curve_supported {
+        if !fan_curve_supported {
             info!(
                 r#"
 fan curves kernel interface not found, your laptop does not support this, or the interface is missing.
 To enable fan-curve support you require a kernel with the following patch applied:
-https://lkml.org/lkml/2021/8/20/232
-Please note that as of 24/08/2021 this is not final.
+https://lkml.org/lkml/2021/10/23/250
+This patch has been accepted upstream for 5.17 kernel release.
 "#
             );
         }
@@ -55,9 +55,12 @@ Please note that as of 24/08/2021 this is not final.
 impl crate::Reloadable for CtrlPlatformProfile {
     /// Fetch the active profile and use that to set all related components up
     fn reload(&mut self) -> Result<(), RogError> {
-        if let Some(curves) = &self.config.fan_curves {
-            if let Ok(mut device) = FanCurveSet::get_device() {
-                curves.write_to_platform(self.config.active_profile, &mut device);
+        if let Some(curves) = &mut self.config.fan_curves {
+            if let Ok(mut device) = FanCurveProfiles::get_device() {
+                // There is a possibility that the curve was default zeroed, so this call initialises
+                // the data from system read and we need to save it after
+                curves.write_profile_curve_to_platform(self.config.active_profile, &mut device)?;
+                self.config.write();
             }
         }
         Ok(())
@@ -65,30 +68,20 @@ impl crate::Reloadable for CtrlPlatformProfile {
 }
 
 impl CtrlPlatformProfile {
-    pub fn new(mut config: ProfileConfig, fan_device: Option<Device>) -> Result<Self, RogError> {
+    pub fn new(config: ProfileConfig) -> Result<Self, RogError> {
         if Profile::is_platform_profile_supported() {
             info!("Device has profile control available");
 
-            if let Some(ref device) = fan_device {
-                let profile = config.active_profile;
-                config
-                    .fan_curves
-                    .as_mut()
-                    .unwrap()
-                    .read_from_dev_profile(profile, device);
+            if FanCurveProfiles::get_device().is_ok() {
+                info!("Device has fan curves available");
             }
-            config.write();
 
-            return Ok(CtrlPlatformProfile { config, fan_device });
+            return Ok(CtrlPlatformProfile { config });
         }
 
         Err(ProfileError::NotSupported.into())
     }
 
-    pub fn get_device(&self) -> Option<Device> {
-        self.fan_device.clone()
-    }
-
     pub fn save_config(&self) {
         self.config.write();
     }
@@ -96,8 +89,6 @@ impl CtrlPlatformProfile {
     /// Toggle to next profile in list. This will first read the config, switch, then write out
     pub(super) fn set_next_profile(&mut self) -> Result<(), RogError> {
         // Read first just incase the user has modified the config before calling this
-        self.config.read();
-
         match self.config.active_profile {
             Profile::Balanced => {
                 Profile::set_profile(Profile::Performance)?;
@@ -112,9 +103,55 @@ impl CtrlPlatformProfile {
                 self.config.active_profile = Profile::Balanced;
             }
         }
+        self.write_profile_curve_to_platform()?;
+        Ok(())
+    }
 
-        self.config.write();
+    /// Set the curve for the active profile active
+    pub(super) fn write_profile_curve_to_platform(&mut self) -> Result<(), RogError> {
+        if let Some(curves) = &mut self.config.fan_curves {
+            if let Ok(mut device) = FanCurveProfiles::get_device() {
+                curves.write_profile_curve_to_platform(self.config.active_profile, &mut device)?;
+            }
+        }
+        Ok(())
+    }
 
+    pub(super) fn set_active_curve_to_defaults(&mut self) -> Result<(), RogError> {
+        if let Some(curves) = self.config.fan_curves.as_mut() {
+            if let Ok(mut device) = FanCurveProfiles::get_device() {
+                curves.set_active_curve_to_defaults(self.config.active_profile, &mut device)?;
+            }
+        }
+        Ok(())
+    }
+}
+
+pub struct CtrlProfileTask {
+    ctrl: Arc<Mutex<CtrlPlatformProfile>>,
+}
+
+impl CtrlProfileTask {
+    pub fn new(ctrl: Arc<Mutex<CtrlPlatformProfile>>) -> Self {
+        Self { ctrl }
+    }
+}
+
+#[async_trait]
+impl CtrlTask for CtrlProfileTask {
+    async fn create_tasks(&self, executor: &mut Executor) -> Result<(), RogError> {
+        let ctrl = self.ctrl.clone();
+        self.repeating_task(666, executor, move || {
+            if let Ok(ref mut lock) = ctrl.try_lock() {
+                let new_profile = Profile::get_active_profile().unwrap();
+                if new_profile != lock.config.active_profile {
+                    lock.config.active_profile = new_profile;
+                    lock.write_profile_curve_to_platform().unwrap();
+                    lock.save_config();
+                }
+            }
+        })
+        .await;
         Ok(())
     }
 }

daemon/src/ctrl_profiles/zbus.rs

@@ -1,12 +1,14 @@
+use async_trait::async_trait;
 use log::warn;
 use rog_profiles::fan_curve_set::CurveData;
 use rog_profiles::fan_curve_set::FanCurveSet;
 use rog_profiles::Profile;
+use zbus::Connection;
+use zbus::SignalContext;
 
 use std::sync::Arc;
 use std::sync::Mutex;
 use zbus::{dbus_interface, fdo::Error};
-use zvariant::ObjectPath;
 
 use super::controller::CtrlPlatformProfile;
 
@@ -35,13 +37,19 @@ impl ProfileZbus {
         ))
     }
 
-    /// Toggle to next platform_profile. Names provided by `Profiles`
-    fn next_profile(&mut self) {
+    /// Toggle to next platform_profile. Names provided by `Profiles`.
+    /// If fan-curves are supported will also activate a fan curve for profile.
+    async fn next_profile(&mut self, #[zbus(signal_context)] ctxt: SignalContext<'_>) {
+        let mut profile = None;
         if let Ok(mut ctrl) = self.inner.try_lock() {
             ctrl.set_next_profile()
                 .unwrap_or_else(|err| warn!("{}", err));
+            ctrl.save_config();
+            profile = Some(ctrl.config.active_profile);
+        }
+        if let Some(profile) = profile {
+            Self::notify_profile(&ctxt, profile).await.ok();
         }
-        self.do_notification();
     }
 
     /// Fetch the active profile name
@@ -56,18 +64,29 @@ impl ProfileZbus {
     }
 
     /// Set this platform_profile name as active
-    fn set_active_profile(&self, profile: Profile) {
+    async fn set_active_profile(
+        &self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        profile: Profile,
+    ) {
+        let mut tmp = None;
         if let Ok(mut ctrl) = self.inner.try_lock() {
             // Read first just incase the user has modified the config before calling this
             ctrl.config.read();
             Profile::set_profile(profile)
-                .map_err(|e| warn!("Profile::set_profile, {}", e))
+                .map_err(|e| warn!("set_profile, {}", e))
                 .ok();
             ctrl.config.active_profile = profile;
+            ctrl.write_profile_curve_to_platform()
+                .map_err(|e| warn!("write_profile_curve_to_platform, {}", e))
+                .ok();
 
             ctrl.save_config();
+            tmp = Some(ctrl.config.active_profile);
+        }
+        if let Some(profile) = tmp {
+            Self::notify_profile(&ctxt, profile).await.ok();
         }
-        self.do_notification();
     }
 
     /// Get a list of profiles that have fan-curves enabled.
@@ -84,14 +103,23 @@ impl ProfileZbus {
         ))
     }
 
-    /// Get a list of profiles that have fan-curves enabled.
-    fn set_enabled_fan_profiles(&mut self, profiles: Vec<Profile>) -> zbus::fdo::Result<()> {
+    /// Set a profile fan curve enabled status. Will also activate a fan curve if in the
+    /// same profile mode
+    fn set_fan_curve_enabled(&mut self, profile: Profile, enabled: bool) -> zbus::fdo::Result<()> {
         if let Ok(mut ctrl) = self.inner.try_lock() {
             ctrl.config.read();
-            if let Some(curves) = &mut ctrl.config.fan_curves {
-                curves.set_enabled_curve_profiles(profiles);
-            }
-            return Err(Error::Failed(UNSUPPORTED_MSG.to_string()));
+            return if let Some(curves) = &mut ctrl.config.fan_curves {
+                curves.set_profile_curve_enabled(profile, enabled);
+
+                ctrl.write_profile_curve_to_platform()
+                    .map_err(|e| warn!("write_profile_curve_to_platform, {}", e))
+                    .ok();
+
+                ctrl.save_config();
+                Ok(())
+            } else {
+                Err(Error::Failed(UNSUPPORTED_MSG.to_string()))
+            };
         }
         Err(Error::Failed(
             "Failed to get enabled fan curve names".to_string(),
@@ -99,72 +127,61 @@ impl ProfileZbus {
     }
 
     /// Get the fan-curve data for the currently active Profile
-    fn active_fan_curve_data(&mut self) -> zbus::fdo::Result<FanCurveSet> {
+    fn fan_curve_data(&mut self, profile: Profile) -> zbus::fdo::Result<FanCurveSet> {
         if let Ok(mut ctrl) = self.inner.try_lock() {
             ctrl.config.read();
             if let Some(curves) = &ctrl.config.fan_curves {
-                return Ok((*curves.get_active_fan_curves()).clone());
+                let curve = curves.get_fan_curves_for(profile);
+                return Ok(curve.clone());
             }
             return Err(Error::Failed(UNSUPPORTED_MSG.to_string()));
         }
         Err(Error::Failed("Failed to get fan curve data".to_string()))
     }
 
-    /// Get fan-curve data for each Profile as an array of objects
-    fn fan_curves(&self) -> zbus::fdo::Result<Vec<FanCurveSet>> {
+    /// Set the fan curve for the specified profile.
+    /// Will also activate the fan curve if the user is in the same mode.
+    fn set_fan_curve(&self, profile: Profile, curve: CurveData) -> zbus::fdo::Result<()> {
         if let Ok(mut ctrl) = self.inner.try_lock() {
             ctrl.config.read();
-            if let Some(curves) = &ctrl.config.fan_curves {
-                return Ok(curves.get_all_fan_curves());
-            }
-            return Err(Error::Failed(UNSUPPORTED_MSG.to_string()));
-        }
-        Err(Error::Failed("Failed to get all fan curves".to_string()))
-    }
-
-    /// Set this fan-curve data
-    fn set_fan_curve(&self, curve: CurveData) -> zbus::fdo::Result<()> {
-        if let Ok(mut ctrl) = self.inner.try_lock() {
-            ctrl.config.read();
-            let profile = ctrl.config.active_profile;
-            if let Some(mut device) = ctrl.get_device() {
-                if let Some(curves) = &mut ctrl.config.fan_curves {
-                    curves.write_and_set_fan_curve(curve, profile, &mut device);
-                }
+            if let Some(curves) = &mut ctrl.config.fan_curves {
+                curves
+                    .save_fan_curve(curve, profile)
+                    .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
             } else {
                 return Err(Error::Failed(UNSUPPORTED_MSG.to_string()));
             }
-
+            ctrl.write_profile_curve_to_platform()
+                .map_err(|e| warn!("Profile::set_profile, {}", e))
+                .ok();
             ctrl.save_config();
         }
+        Ok(())
+    }
 
-        Err(Error::Failed("Failed to set fan curves".to_string()))
+    /// Reset the stored (self) and device curve to the defaults of the platform.
+    ///
+    /// Each platform_profile has a different default and the defualt can be read
+    /// only for the currently active profile.
+    fn set_active_curve_to_defaults(&self) -> zbus::fdo::Result<()> {
+        if let Ok(mut ctrl) = self.inner.try_lock() {
+            ctrl.config.read();
+            ctrl.set_active_curve_to_defaults()
+                .map_err(|e| warn!("Profile::set_active_curve_to_defaults, {}", e))
+                .ok();
+            ctrl.save_config();
+        }
+        Ok(())
     }
 
     #[dbus_interface(signal)]
-    fn notify_profile(&self, profile: &Profile) -> zbus::Result<()> {}
-}
-
-impl ProfileZbus {
-    fn do_notification(&self) {
-        if let Ok(ctrl) = self.inner.try_lock() {
-            self.notify_profile(&ctrl.config.active_profile)
-                .unwrap_or_else(|err| warn!("{}", err));
-        }
+    async fn notify_profile(signal_ctxt: &SignalContext<'_>, profile: Profile) -> zbus::Result<()> {
     }
 }
 
+#[async_trait]
 impl crate::ZbusAdd for ProfileZbus {
-    fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(
-                &ObjectPath::from_str_unchecked("/org/asuslinux/Profile"),
-                self,
-            )
-            .map_err(|err| {
-                warn!("DbusFanAndCpu: add_to_server {}", err);
-                err
-            })
-            .ok();
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/Profile", server).await;
     }
 }

daemon/src/ctrl_rog_bios.rs

@@ -1,4 +1,5 @@
 use crate::{config::Config, error::RogError, GetSupported};
+use async_trait::async_trait;
 use log::{error, info, warn};
 use rog_supported::RogBiosSupportedFunctions;
 use std::fs::OpenOptions;
@@ -8,8 +9,8 @@ use std::path::Path;
 use std::process::Command;
 use std::sync::Arc;
 use std::sync::Mutex;
-use zbus::dbus_interface;
-use zvariant::ObjectPath;
+use zbus::Connection;
+use zbus::{dbus_interface, SignalContext};
 
 const INITRAMFS_PATH: &str = "/usr/sbin/update-initramfs";
 const DRACUT_PATH: &str = "/usr/bin/dracut";
@@ -18,6 +19,9 @@ static ASUS_SWITCH_GRAPHIC_MODE: &str =
     "/sys/firmware/efi/efivars/AsusSwitchGraphicMode-607005d5-3f75-4b2e-98f0-85ba66797a3e";
 static ASUS_POST_LOGO_SOUND: &str =
     "/sys/firmware/efi/efivars/AsusPostLogoSound-607005d5-3f75-4b2e-98f0-85ba66797a3e";
+static ASUS_PANEL_OD_PATH: &str = "/sys/devices/platform/asus-nb-wmi/panel_od";
+static ASUS_DGPU_DISABLE_PATH: &str = "/sys/devices/platform/asus-nb-wmi/dgpu_disable";
+static ASUS_EGPU_ENABLE_PATH: &str = "/sys/devices/platform/asus-nb-wmi/egpu_enable";
 
 pub struct CtrlRogBios {
     _config: Arc<Mutex<Config>>,
@@ -28,30 +32,34 @@ impl GetSupported for CtrlRogBios {
 
     fn get_supported() -> Self::A {
         RogBiosSupportedFunctions {
-            post_sound_toggle: Path::new(ASUS_POST_LOGO_SOUND).exists(),
-            dedicated_gfx_toggle: Path::new(ASUS_SWITCH_GRAPHIC_MODE).exists(),
+            post_sound: Path::new(ASUS_POST_LOGO_SOUND).exists(),
+            dedicated_gfx: Path::new(ASUS_SWITCH_GRAPHIC_MODE).exists(),
+            panel_overdrive: Path::new(ASUS_PANEL_OD_PATH).exists(),
+            dgpu_disable: Path::new(ASUS_DGPU_DISABLE_PATH).exists(),
+            egpu_enable: Path::new(ASUS_EGPU_ENABLE_PATH).exists(),
         }
     }
 }
 
 #[dbus_interface(name = "org.asuslinux.Daemon")]
 impl CtrlRogBios {
-    pub fn set_dedicated_graphic_mode(&mut self, dedicated: bool) {
+    async fn set_dedicated_graphic_mode(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        dedicated: bool,
+    ) {
         self.set_gfx_mode(dedicated)
             .map_err(|err| {
                 warn!("CtrlRogBios: set_asus_switch_graphic_mode {}", err);
                 err
             })
             .ok();
-        self.notify_dedicated_graphic_mode(dedicated)
-            .map_err(|err| {
-                warn!("CtrlRogBios: notify_asus_switch_graphic_mode {}", err);
-                err
-            })
+        Self::notify_dedicated_graphic_mode(&ctxt, dedicated)
+            .await
             .ok();
     }
 
-    pub fn dedicated_graphic_mode(&self) -> i8 {
+    fn dedicated_graphic_mode(&self) -> i8 {
         Self::get_gfx_mode()
             .map_err(|err| {
                 warn!("CtrlRogBios: get_gfx_mode {}", err);
@@ -61,24 +69,27 @@ impl CtrlRogBios {
     }
 
     #[dbus_interface(signal)]
-    pub fn notify_dedicated_graphic_mode(&self, dedicated: bool) -> zbus::Result<()> {}
+    async fn notify_dedicated_graphic_mode(
+        signal_ctxt: &SignalContext<'_>,
+        dedicated: bool,
+    ) -> zbus::Result<()> {
+    }
 
-    pub fn set_post_boot_sound(&mut self, on: bool) {
+    async fn set_post_boot_sound(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        on: bool,
+    ) {
         Self::set_boot_sound(on)
             .map_err(|err| {
                 warn!("CtrlRogBios: set_post_boot_sound {}", err);
                 err
             })
             .ok();
-        self.notify_post_boot_sound(on)
-            .map_err(|err| {
-                warn!("CtrlRogBios: notify_post_boot_sound {}", err);
-                err
-            })
-            .ok();
+        Self::notify_post_boot_sound(&ctxt, on).await.ok();
     }
 
-    pub fn post_boot_sound(&self) -> i8 {
+    fn post_boot_sound(&self) -> i8 {
         Self::get_boot_sound()
             .map_err(|err| {
                 warn!("CtrlRogBios: get_boot_sound {}", err);
@@ -88,21 +99,59 @@ impl CtrlRogBios {
     }
 
     #[dbus_interface(signal)]
-    pub fn notify_post_boot_sound(&self, dedicated: bool) -> zbus::Result<()> {}
-}
+    async fn notify_post_boot_sound(ctxt: &SignalContext<'_>, on: bool) -> zbus::Result<()> {}
 
-impl crate::ZbusAdd for CtrlRogBios {
-    fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(
-                &ObjectPath::from_str_unchecked("/org/asuslinux/RogBios"),
-                self,
-            )
+    async fn set_panel_overdrive(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        overdrive: bool,
+    ) {
+        if self
+            .set_panel_od(overdrive)
             .map_err(|err| {
-                warn!("CtrlRogBios: add_to_server {}", err);
+                warn!("CtrlRogBios: set_panel_overdrive {}", err);
                 err
             })
-            .ok();
+            .is_ok()
+        {
+            Self::notify_panel_overdrive(&ctxt, overdrive).await.ok();
+        }
+    }
+
+    fn panel_overdrive(&self) -> i8 {
+        let path = ASUS_PANEL_OD_PATH;
+        if let Ok(mut file) = OpenOptions::new().read(true).open(path).map_err(|err| {
+            warn!("CtrlRogBios: panel_overdrive {}", err);
+            err
+        }) {
+            let mut buf = Vec::new();
+            file.read_to_end(&mut buf)
+                .map_err(|err| {
+                    warn!("CtrlRogBios: set_panel_overdrive {}", err);
+                    err
+                })
+                .ok();
+
+            if buf.len() >= 1 {
+                let tmp = String::from_utf8_lossy(&buf[0..1]);
+                return tmp.parse::<i8>().unwrap_or(-1);
+            }
+        }
+        -1
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_panel_overdrive(
+        signal_ctxt: &SignalContext<'_>,
+        overdrive: bool,
+    ) -> zbus::Result<()> {
+    }
+}
+
+#[async_trait]
+impl crate::ZbusAdd for CtrlRogBios {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/RogBios", server).await;
     }
 }
 
@@ -308,4 +357,43 @@ impl CtrlRogBios {
         }
         Ok(())
     }
+
+    fn set_panel_od(&mut self, overdrive: bool) -> Result<(), RogError> {
+        let path = ASUS_PANEL_OD_PATH;
+        let mut file = OpenOptions::new().write(true).open(path).map_err(|err| {
+            warn!("CtrlRogBios: set_panel_overdrive {}", err);
+            err
+        })?;
+
+        let s = if overdrive { '1' } else { '0' };
+        file.write(&[s as u8]).map_err(|err| {
+            warn!("CtrlRogBios: set_panel_overdrive {}", err);
+            err
+        })?;
+        Ok(())
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use super::CtrlRogBios;
+    use crate::config::Config;
+    use std::sync::{Arc, Mutex};
+
+    #[test]
+    #[ignore = "Must be manually tested"]
+    fn set_multizone_4key_config() {
+        let config = Config::default();
+
+        let controller = CtrlRogBios {
+            _config: Arc::new(Mutex::new(config)),
+        };
+
+        let res = controller.panel_overdrive();
+        assert_eq!(res, 1);
+
+        // controller.set_panel_od(false).unwrap();
+        // let res = controller.panel_overdrive();
+        // assert_eq!(res, 0);
+    }
 }

daemon/src/ctrl_supported.rs

@@ -1,8 +1,8 @@
-use log::warn;
+use async_trait::async_trait;
 use serde_derive::{Deserialize, Serialize};
 use zbus::dbus_interface;
-use zvariant::ObjectPath;
-use zvariant_derive::Type;
+use zbus::Connection;
+use zvariant::Type;
 
 use crate::{
     ctrl_anime::CtrlAnime, ctrl_aura::controller::CtrlKbdLed, ctrl_charge::CtrlCharge,
@@ -30,18 +30,10 @@ impl SupportedFunctions {
     }
 }
 
+#[async_trait]
 impl crate::ZbusAdd for SupportedFunctions {
-    fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(
-                &ObjectPath::from_str_unchecked("/org/asuslinux/Supported"),
-                self,
-            )
-            .map_err(|err| {
-                warn!("SupportedFunctions: add_to_server {}", err);
-                err
-            })
-            .ok();
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/Supported", server).await;
     }
 }
 

daemon/src/daemon.rs

@@ -1,3 +1,14 @@
+use std::env;
+use std::error::Error;
+use std::io::Write;
+use std::sync::{Arc, Mutex};
+
+use ::zbus::Connection;
+use daemon::ctrl_profiles::controller::CtrlProfileTask;
+use log::LevelFilter;
+use log::{error, info, warn};
+use smol::Executor;
+
 use daemon::ctrl_anime::config::AnimeConfig;
 use daemon::ctrl_anime::zbus::CtrlAnimeZbus;
 use daemon::ctrl_anime::*;
@@ -7,6 +18,7 @@ use daemon::ctrl_aura::controller::{
 };
 use daemon::ctrl_charge::CtrlCharge;
 use daemon::ctrl_profiles::config::ProfileConfig;
+use daemon::ctrl_rog_bios::CtrlRogBios;
 use daemon::{
     config::Config, ctrl_supported::SupportedFunctions, laptops::print_board_info, GetSupported,
 };
@@ -14,20 +26,9 @@ use daemon::{
     ctrl_profiles::{controller::CtrlPlatformProfile, zbus::ProfileZbus},
     laptops::LaptopLedData,
 };
-
-use ::zbus::{fdo, Connection, ObjectServer};
 use daemon::{CtrlTask, Reloadable, ZbusAdd};
-use log::LevelFilter;
-use log::{error, info, warn};
 use rog_dbus::DBUS_NAME;
-use rog_profiles::fan_curve_set::FanCurveSet;
-use std::env;
-use std::error::Error;
-use std::io::Write;
-use std::sync::Arc;
-use std::sync::Mutex;
-
-use daemon::ctrl_rog_bios::CtrlRogBios;
+use rog_profiles::Profile;
 
 static PROFILE_CONFIG_PATH: &str = "/etc/asusd/profile.conf";
 
@@ -60,27 +61,25 @@ pub fn main() -> Result<(), Box<dyn std::error::Error>> {
     info!(" rog-profiles v{}", rog_profiles::VERSION);
     info!("rog-supported v{}", rog_supported::VERSION);
 
-    start_daemon()?;
+    let mut executor = Executor::new();
+
+    smol::block_on(start_daemon(&mut executor))?;
     Ok(())
 }
 
 /// The actual main loop for the daemon
-fn start_daemon() -> Result<(), Box<dyn Error>> {
+async fn start_daemon(executor: &mut Executor<'_>) -> Result<(), Box<dyn Error>> {
     let supported = SupportedFunctions::get_supported();
     print_board_info();
     println!("{}", serde_json::to_string_pretty(&supported)?);
 
-    // Collect tasks for task thread
-    let mut tasks: Vec<Box<dyn CtrlTask + Send>> = Vec::new();
     // Start zbus server
-    let connection = Connection::new_system()?;
-    let fdo_connection = fdo::DBusProxy::new(&connection)?;
-    let mut object_server = ObjectServer::new(&connection);
+    let mut connection = Connection::system().await?;
 
     let config = Config::load();
     let config = Arc::new(Mutex::new(config));
 
-    supported.add_to_server(&mut object_server);
+    supported.add_to_server(&mut connection).await;
 
     match CtrlRogBios::new(config.clone()) {
         Ok(mut ctrl) => {
@@ -88,43 +87,49 @@ fn start_daemon() -> Result<(), Box<dyn Error>> {
             ctrl.reload()
                 .unwrap_or_else(|err| warn!("Battery charge limit: {}", err));
             // Then register to dbus server
-            ctrl.add_to_server(&mut object_server);
+            ctrl.add_to_server(&mut connection).await;
         }
         Err(err) => {
             error!("rog_bios_control: {}", err);
         }
     }
 
-    match CtrlCharge::new(config) {
+    match CtrlCharge::new(config.clone()) {
         Ok(mut ctrl) => {
             // Do a reload of any settings
             ctrl.reload()
                 .unwrap_or_else(|err| warn!("Battery charge limit: {}", err));
             // Then register to dbus server
-            ctrl.add_to_server(&mut object_server);
+            ctrl.add_to_server(&mut connection).await;
+
+            let task = CtrlCharge::new(config)?;
+            task.create_tasks(executor).await.ok();
         }
         Err(err) => {
             error!("charge_control: {}", err);
         }
     }
 
-    let fan_device = if let Ok(res) = FanCurveSet::get_device() {
-        Some(res)
-    } else {
-        None
-    };
-    let profile_config = ProfileConfig::load(PROFILE_CONFIG_PATH.into());
-    match CtrlPlatformProfile::new(profile_config, fan_device) {
-        Ok(mut ctrl) => {
-            ctrl.reload()
-                .unwrap_or_else(|err| warn!("Profile control: {}", err));
+    if Profile::is_platform_profile_supported() {
+        let profile_config = ProfileConfig::load(PROFILE_CONFIG_PATH.into());
+        match CtrlPlatformProfile::new(profile_config) {
+            Ok(mut ctrl) => {
+                ctrl.reload()
+                    .unwrap_or_else(|err| warn!("Profile control: {}", err));
 
-            let tmp = Arc::new(Mutex::new(ctrl));
-            ProfileZbus::new(tmp).add_to_server(&mut object_server);
-        }
-        Err(err) => {
-            error!("Profile control: {}", err);
+                let tmp = Arc::new(Mutex::new(ctrl));
+                let task = CtrlProfileTask::new(tmp.clone());
+                task.create_tasks(executor).await.ok();
+
+                let task = ProfileZbus::new(tmp.clone());
+                task.add_to_server(&mut connection).await;
+            }
+            Err(err) => {
+                error!("Profile control: {}", err);
+            }
         }
+    } else {
+        warn!("platform_profile support not found. This requires kernel 5.15.x or the patch applied: https://lkml.org/lkml/2021/8/18/1022");
     }
 
     match CtrlAnime::new(AnimeConfig::load()) {
@@ -137,9 +142,10 @@ fn start_daemon() -> Result<(), Box<dyn Error>> {
                 .unwrap_or_else(|err| warn!("AniMe: {}", err));
 
             let zbus = CtrlAnimeZbus(inner.clone());
-            zbus.add_to_server(&mut object_server);
+            zbus.add_to_server(&mut connection).await;
 
-            tasks.push(Box::new(CtrlAnimeTask::new(inner)));
+            let task = CtrlAnimeTask::new(inner).await;
+            task.create_tasks(executor).await.ok();
         }
         Err(err) => {
             error!("AniMe control: {}", err);
@@ -157,42 +163,21 @@ fn start_daemon() -> Result<(), Box<dyn Error>> {
                 .reload()
                 .unwrap_or_else(|err| warn!("Keyboard LED control: {}", err));
 
-            CtrlKbdLedZbus::new(inner.clone()).add_to_server(&mut object_server);
+            CtrlKbdLedZbus::new(inner.clone())
+                .add_to_server(&mut connection)
+                .await;
+
             let task = CtrlKbdLedTask::new(inner);
-            tasks.push(Box::new(task));
+            task.create_tasks(executor).await.ok();
         }
         Err(err) => {
             error!("Keyboard control: {}", err);
         }
     }
 
-    // TODO: implement messaging between threads to check fails
-
-    // Run tasks
-    let handle = std::thread::Builder::new()
-        .name("asusd watch".to_string())
-        .spawn(move || loop {
-            std::thread::sleep(std::time::Duration::from_millis(100));
-
-            for ctrl in tasks.iter() {
-                ctrl.do_task()
-                    .map_err(|err| {
-                        warn!("do_task error: {}", err);
-                    })
-                    .ok();
-            }
-        });
-
     // Request dbus name after finishing initalizing all functions
-    fdo_connection.request_name(DBUS_NAME, fdo::RequestNameFlags::ReplaceExisting.into())?;
-
-    // Loop to check errors and iterate zbus server
+    connection.request_name(DBUS_NAME).await?;
     loop {
-        if let Err(err) = &handle {
-            error!("{}", err);
-        }
-        if let Err(err) = object_server.try_handle_next() {
-            error!("{}", err);
-        }
+        smol::block_on(executor.tick());
     }
 }

daemon/src/error.rs

@@ -1,3 +1,4 @@
+use rog_anime::error::AnimeError;
 use rog_profiles::error::ProfileError;
 use std::convert::From;
 use std::fmt;
@@ -22,6 +23,11 @@ pub enum RogError {
     Modprobe(String),
     Io(std::io::Error),
     Zbus(zbus::Error),
+    ChargeLimit(u8),
+    AuraEffectNotSupported,
+    NoAuraKeyboard,
+    NoAuraNode,
+    Anime(AnimeError),
 }
 
 impl fmt::Display for RogError {
@@ -46,6 +52,11 @@ impl fmt::Display for RogError {
             RogError::Modprobe(detail) => write!(f, "Modprobe error: {}", detail),
             RogError::Io(detail) => write!(f, "std::io error: {}", detail),
             RogError::Zbus(detail) => write!(f, "Zbus error: {}", detail),
+            RogError::ChargeLimit(value) => write!(f, "Invalid charging limit, not in range 20-100%: {}", value),
+            RogError::AuraEffectNotSupported => write!(f, "Aura effect not supported"),
+            RogError::NoAuraKeyboard => write!(f, "No supported Aura keyboard"),
+            RogError::NoAuraNode => write!(f, "No Aura keyboard node found"),
+            RogError::Anime(deets) => write!(f, "AniMe Matrix error: {}", deets),
         }
     }
 }
@@ -58,6 +69,12 @@ impl From<ProfileError> for RogError {
     }
 }
 
+impl From<AnimeError> for RogError {
+    fn from(err: AnimeError) -> Self {
+        RogError::Anime(err)
+    }
+}
+
 impl From<zbus::Error> for RogError {
     fn from(err: zbus::Error) -> Self {
         RogError::Zbus(err)

daemon/src/laptops.rs

@@ -1,10 +1,11 @@
 use log::{info, warn};
-use rog_aura::AuraModeNum;
+use rog_aura::{AuraModeNum, AuraZone};
 use serde_derive::{Deserialize, Serialize};
 use std::fs::OpenOptions;
 use std::io::Read;
 
 pub const ASUS_LED_MODE_CONF: &str = "/etc/asusd/asusd-ledmodes.toml";
+pub const ASUS_LED_MODE_USER_CONF: &str = "/etc/asusd/asusd-user-ledmodes.toml";
 pub const ASUS_KEYBOARD_DEVICES: [&str; 4] = ["1866", "1869", "1854", "19b6"];
 
 pub fn print_board_info() {
@@ -32,17 +33,18 @@ pub fn print_modes(supported_modes: &[u8]) {
     }
 }
 
-#[derive(Debug, Deserialize, Serialize)]
+#[derive(Debug, Default, Deserialize, Serialize)]
 struct LedSupportFile {
     led_data: Vec<LaptopLedData>,
 }
 
-#[derive(Debug, Clone, Deserialize, Serialize)]
+#[derive(Debug, Clone, Default, Deserialize, Serialize)]
+#[serde(default)]
 pub struct LaptopLedData {
     pub prod_family: String,
     pub board_names: Vec<String>,
     pub standard: Vec<AuraModeNum>,
-    pub multizone: bool,
+    pub multizone: Vec<AuraZone>,
     pub per_key: bool,
 }
 
@@ -62,7 +64,7 @@ impl LaptopLedData {
             prod_family,
             board_names: vec![board_name],
             standard: vec![],
-            multizone: false,
+            multizone: vec![],
             per_key: false,
         }
     }
@@ -85,19 +87,81 @@ impl LedSupportFile {
     }
 
     fn load_from_config() -> Option<Self> {
+        let mut loaded = false;
+        let mut data = LedSupportFile::default();
+        // Load user configs first so they are first to be checked
+        if let Ok(mut file) = OpenOptions::new().read(true).open(&ASUS_LED_MODE_USER_CONF) {
+            let mut buf = String::new();
+            if let Ok(l) = file.read_to_string(&mut buf) {
+                if l == 0 {
+                    warn!("{} is empty", ASUS_LED_MODE_USER_CONF);
+                } else {
+                    if let Ok(mut tmp) = toml::from_str::<LedSupportFile>(&buf) {
+                        data.led_data.append(&mut tmp.led_data);
+                    }
+                    info!(
+                        "Loaded user-defined LED support data from {}",
+                        ASUS_LED_MODE_USER_CONF
+                    );
+                }
+            }
+        }
+        // Load and append the default LED support data
         if let Ok(mut file) = OpenOptions::new().read(true).open(&ASUS_LED_MODE_CONF) {
             let mut buf = String::new();
             if let Ok(l) = file.read_to_string(&mut buf) {
                 if l == 0 {
                     warn!("{} is empty", ASUS_LED_MODE_CONF);
                 } else {
-                    return Some(toml::from_str(&buf).unwrap_or_else(|_| {
-                        panic!("Could not deserialise {}", ASUS_LED_MODE_CONF)
-                    }));
+                    let mut tmp: LedSupportFile = toml::from_str(&buf)
+                        .unwrap_or_else(|_| panic!("Could not deserialise {}", ASUS_LED_MODE_CONF));
+                    data.led_data.append(&mut tmp.led_data);
+                    loaded = true;
+                    info!(
+                        "Loaded default LED support data from {}",
+                        ASUS_LED_MODE_CONF
+                    );
                 }
             }
         }
-        warn!("Does {} exist?", ASUS_LED_MODE_CONF);
+
+        if loaded {
+            return Some(data);
+        }
+
+        warn!("Does {} exist?", ASUS_LED_MODE_USER_CONF);
         None
     }
 }
+
+#[cfg(test)]
+mod tests {
+    use std::{fs::OpenOptions, io::Read, path::PathBuf};
+
+    use super::LaptopLedData;
+    use rog_aura::{AuraModeNum, AuraZone};
+
+    #[test]
+    fn check_data_parse() {
+        let led = LaptopLedData {
+            prod_family: "Test".to_owned(),
+            board_names: vec!["Test".to_owned()],
+            standard: vec![AuraModeNum::Static],
+            multizone: vec![AuraZone::Key1, AuraZone::Logo, AuraZone::BarLeft],
+            per_key: false,
+        };
+
+        let toml = toml::to_string_pretty(&led).unwrap();
+        println!("{toml}");
+
+        let mut data = PathBuf::from(env!("CARGO_MANIFEST_DIR"));
+        data.push("../data/asusd-ledmodes.toml");
+
+        let mut file = OpenOptions::new().read(true).open(&data).unwrap();
+        let mut buf = String::new();
+        file.read_to_string(&mut buf).unwrap();
+
+        let x = toml::to_string_pretty(&buf).unwrap();
+        println!("{x}");
+    }
+}

daemon/src/lib.rs

@@ -27,11 +27,17 @@ pub mod laptops;
 /// Fetch all supported functions for the laptop
 pub mod ctrl_supported;
 
-mod error;
+pub mod error;
+
+use std::time::Duration;
 
 use crate::error::RogError;
+use async_trait::async_trait;
 use config::Config;
-use zbus::ObjectServer;
+use log::warn;
+use smol::{stream::StreamExt, Executor, Timer};
+use zbus::Connection;
+use zvariant::ObjectPath;
 
 pub static VERSION: &str = env!("CARGO_PKG_VERSION");
 
@@ -39,12 +45,48 @@ pub trait Reloadable {
     fn reload(&mut self) -> Result<(), RogError>;
 }
 
+#[async_trait]
 pub trait ZbusAdd {
-    fn add_to_server(self, server: &mut ObjectServer);
+    async fn add_to_server(self, server: &mut Connection);
+
+    async fn add_to_server_helper(
+        iface: impl zbus::Interface,
+        path: &str,
+        server: &mut Connection,
+    ) {
+        server
+            .object_server()
+            .at(&ObjectPath::from_str_unchecked(path), iface)
+            .await
+            .map_err(|err| {
+                warn!("{}: add_to_server {}", path, err);
+                err
+            })
+            .ok();
+    }
 }
 
+/// Set up a task to run on the async executor
+#[async_trait]
 pub trait CtrlTask {
-    fn do_task(&self) -> Result<(), RogError>;
+    /// Implement to set up various tasks that may be required, using the `Executor`.
+    /// No blocking loops are allowed, or they must be run on a separate thread.
+    async fn create_tasks(&self, executor: &mut Executor) -> Result<(), RogError>;
+
+    /// Create a timed repeating task
+    async fn repeating_task(
+        &self,
+        millis: u64,
+        executor: &mut Executor,
+        mut task: impl FnMut() + Send + 'static,
+    ) {
+        let timer = Timer::interval(Duration::from_millis(millis));
+        executor
+            .spawn(async move {
+                timer.for_each(|_| task()).await;
+            })
+            .detach();
+    }
 }
 
 pub trait CtrlTaskComplex {

data/asusd-ledmodes.toml

@@ -2,117 +2,168 @@
 prod_family = "Zephyrus S"
 board_names = ["GX502", "GX701", "G531", "GL531", "G532"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
-multizone = false
+multizone = []
 per_key = true
 
 [[led_data]]
 prod_family = "Zephyrus M"
 board_names = ["GU502GV"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
-multizone = false
+multizone = []
 per_key = true
 
 [[led_data]]
 prod_family = "Zephyrus M"
 board_names = ["GM501GS"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
-multizone = true
+multizone = ["Key1", "Key2", "Key3", "Key4"]
 per_key = false
 
 [[led_data]]
 prod_family = "ROG Zephyrus M15"
-board_names = ["GU502LW"]
+board_names = ["GU502LW", "GU502LV"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
-multizone = false
+multizone = []
 per_key = true
 
 [[led_data]]
 prod_family = "ROG Zephyrus M15"
 board_names = ["GU502LU"]
 standard = ["Static", "Breathe", "Strobe", "Pulse"]
-multizone = false
+multizone = []
 per_key = false
 
+[[led_data]]
+prod_family = "ROG Zephyrus S17"
+board_names = ["GX703HS"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
+multizone = []
+per_key = false
+
+
 [[led_data]]
 prod_family = "Zephyrus"
 board_names = ["GM501GM", "GX531"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
-multizone = true
+multizone = ["Key1", "Key2", "Key3", "Key4"]
 per_key = false
 
 [[led_data]]
 prod_family = "ROG Strix"
-board_names = ["G531GW", "G533QR", "G733QS", "G733QR"]
+board_names = ["G531GW", "G533QR", "G533QS", "G733QS", "G733QR", "G513QR", "G713QR", "G513QM", "G713IC"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
-multizone = false
+multizone = []
 per_key = true
 
 [[led_data]]
 prod_family = "ROG Strix"
-board_names = ["GX531", "G512LV", "G712LV", "G712LW", "G513IH", "G513QY"]
+board_names = ["G513QE", "GX531", "G512LV", "G712LV", "G712LW", "G513IH", "G513QY", "G713QM", "G512"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
-multizone = true
+multizone = ["Key1", "Key2", "Key3", "Key4"]
 per_key = false
 
 [[led_data]]
 prod_family = "ROG Strix"
 board_names = ["G512LI", "G712LI", "G531GD"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
-multizone = false
+multizone = []
 per_key = false
 
+[[led_data]]
+prod_family = "ROG Strix"
+board_names = ["G513IM"]
+standard = ["Flash", "Static", "Breathe", "Strobe", "Rainbow"]
+multizone = []
+per_key = true
+
 [[led_data]]
 prod_family = "Strix"
 board_names = ["G731GV", "G731GW", "G531GV"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow"]
-multizone = true
+multizone = ["Key1", "Key2", "Key3", "Key4"]
+per_key = false
+
+[[led_data]]
+prod_family = "Strix"
+board_names = ["GL504G"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = ["Key1", "Key2", "Key3", "Key4", "Logo", "BarLeft", "BarRight"]
 per_key = false
 
 [[led_data]]
 prod_family = "Strix"
 board_names = ["G731GT", "G731GU", "G531GT", "G531GU"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow"]
-multizone = false
+multizone = []
 per_key = false
 
 [[led_data]]
 prod_family = "Strix Scar"
 board_names = ["G531", "G731"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
-multizone = true
+multizone = ["Key1", "Key2", "Key3", "Key4"]
 per_key = true
 
 [[led_data]]
 prod_family = "ROG"
 board_names = ["GL553VE"]
 standard = ["Static", "Breathe", "Strobe"]
-multizone = true
+multizone = ["Key1", "Key2", "Key3", "Key4"]
 per_key = false
 
 [[led_data]]
 prod_family = "ROG Zephyrus G14"
 board_names = ["GA401Q"]
 standard = ["Static", "Breathe", "Pulse"]
-multizone = false
+multizone = []
+per_key = false
+
+[[led_data]]
+prod_family = "ROG Zephyrus G14"
+board_names = ["GA402R"]
+standard = ["Static", "Breathe", "Pulse", "Rainbow"]
+multizone = []
+per_key = false
+
+# GA503QE at higher priority (first match) than GA503Q
+[[led_data]]
+prod_family = "ROG Zephyrus G15"
+board_names = ["GA503QE"]
+standard = ["Static", "Breathe", "Pulse"]
+multizone = []
 per_key = false
 
 [[led_data]]
 prod_family = "ROG Zephyrus G15"
-board_names = ["GA503Q"]
+board_names = ["GA503Q", "GA503R"]
 standard = ["Static", "Breathe", "Pulse", "Rainbow", "Strobe"]
-multizone = false
+multizone = []
 per_key = false
 
 [[led_data]]
 prod_family = "ROG Zephyrus"
 board_names = ["GX550L"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
-multizone = false
+multizone = []
 per_key = true
 
 [[led_data]]
 prod_family = "ROG Zephyrus Duo 15 SE"
-board_name = ["GX551Q"]
-standard ["Static", "Breathe", "Pulse", "Rainbow", "Strobe"]
-multizone = false
-per_key = true
+board_names = ["GX551Q"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = []
+per_key = true
+
+[[led_data]]
+prod_family = "ROG Flow X13"
+board_names = ["GV301QH", "GV301QE"]
+standard = ["Static", "Breathe", "Pulse"]
+multizone = []
+per_key = false
+
+[[led_data]]
+prod_family = "ROG Strix" 
+board_names = ["G513IC"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = []
+per_key = false

design-patterns.md

@@ -28,18 +28,53 @@ impl CtrlAnime {
 }
 ```
 
-The task trait:
+The task trait. There are three ways to implement this:
 
 ```rust
 pub struct CtrlAnimeTask(Arc<Mutex<CtrlAnime>>);
 
 impl crate::CtrlTask for CtrlAnimeTask {
-    fn do_task(&self) -> Result<(), RogError> {
+    // This will run once only
+    fn create_tasks(&self, executor: &mut Executor) -> Result<(), RogError> {
        if let Ok(lock) = self.inner.try_lock() {
             <some action>
         }
         Ok(())
     }
+
+    // This will run until the notification stream closes (which in most cases will be never)
+    fn create_tasks(&self, executor: &mut Executor) -> Result<(), RogError> {
+        let connection = Connection::system().await.unwrap();
+        let manager = ManagerProxy::new(&connection).await.unwrap();
+
+        let inner = self.inner.clone();
+        executor
+            .spawn(async move {
+                // A notification from logind dbus interface
+                if let Ok(p) = manager.receive_prepare_for_sleep().await {
+                    // A stream that will continuously output events
+                    p.for_each(|_| {
+                        if let Ok(lock) = inner.try_lock() {
+                            // Do stuff here
+                        }
+                    })
+                    .await;
+                }
+            })
+            .detach();
+    }
+
+    // This task will run every 500 milliseconds
+    fn create_tasks(&self, executor: &mut Executor) -> Result<(), RogError> {
+        let inner = self.inner.clone();
+        // This is a provided free trait to help set up a repeating task
+        self.repeating_task(500, executor, move || {
+            if let Ok(lock) = inner.try_lock() {
+                // Do stuff here
+            }
+        })
+        .await;
+    }
 }
 ```
 
@@ -61,18 +96,11 @@ The Zbus requirements:
 ```rust
 pub struct CtrlAnimeZbus(Arc<Mutex<CtrlAnime>>);
 
+#[async_trait]
 impl crate::ZbusAdd for CtrlAnimeZbus {
     fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(
-                &ObjectPath::from_str_unchecked("/org/asuslinux/Anime"),
-                self,
-            )
-            .map_err(|err| {
-                warn!("CtrlAnimeDisplay: add_to_server {}", err);
-                err
-            })
-            .ok();
+        // This is a provided free helper trait with pre-set body. It will move self in-to.
+        Self::add_to_server_helper(self, "/org/asuslinux/Anime", server).await;
     }
 }
 

rog-anime/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "rog_anime"
-version = "1.1.0"
+version = "1.3.5"
 license = "MPL-2.0"
 readme = "README.md"
 authors = ["Luke <luke@ljones.dev>"]
@@ -13,18 +13,23 @@ edition = "2018"
 exclude = ["data"]
 
 [features]
-default = ["dbus"]
-dbus = ["zvariant", "zvariant_derive"]
+default = ["dbus", "detect"]
+dbus = ["zvariant", "zbus"]
+detect = ["udev", "sysfs-class"]
 
 [dependencies]
 png_pong = "^0.8.0"
 pix = "0.13"
 gif = "^0.11.2"
+log = "*"
 
 serde = "^1.0"
 serde_derive = "^1.0"
 
-glam = { version = "0.14.0", features = ["serde"] }
+glam = { version = "0.20.5", features = ["serde"] }
 
-zvariant = { version = "^2.6", optional = true }
-zvariant_derive = { version = "^2.6", optional = true }
+zvariant = { version = "^3.0", optional = true }
+zbus = { version = "^2.2", optional = true }
+
+udev = { version = "^0.6", optional = true }
+sysfs-class = { version = "^0.1", optional = true }

rog-anime/src/data.rs

@@ -1,17 +1,18 @@
 use std::{
-    sync::{
-        atomic::{AtomicBool, Ordering},
-        Arc,
-    },
+    convert::TryFrom,
     thread::sleep,
     time::{Duration, Instant},
 };
 
+use log::info;
 use serde_derive::{Deserialize, Serialize};
 #[cfg(feature = "dbus")]
-use zvariant_derive::Type;
+use zvariant::Type;
 
-use crate::{error::AnimeError, AnimTime, AnimeGif};
+use crate::{
+    error::{AnimeError, Result},
+    AnimTime, AnimeGif,
+};
 
 /// The first 7 bytes of a USB packet are accounted for by `USB_PREFIX1` and `USB_PREFIX2`
 const BLOCK_START: usize = 7;
@@ -19,48 +20,85 @@ const BLOCK_START: usize = 7;
 const BLOCK_END: usize = 634;
 /// Individual usable data length of each USB packet
 const PANE_LEN: usize = BLOCK_END - BLOCK_START;
-/// The length of usable data
-pub const ANIME_DATA_LEN: usize = PANE_LEN * 2;
 
+/// First packet is for GA401 + GA402
 const USB_PREFIX1: [u8; 7] = [0x5e, 0xc0, 0x02, 0x01, 0x00, 0x73, 0x02];
+/// Second packet is for GA401 + GA402
 const USB_PREFIX2: [u8; 7] = [0x5e, 0xc0, 0x02, 0x74, 0x02, 0x73, 0x02];
+/// Third packet is for GA402 matrix
+const USB_PREFIX3: [u8; 7] = [0x5e, 0xc0, 0x02, 0xe7, 0x04, 0x73, 0x02];
 
 #[cfg_attr(feature = "dbus", derive(Type))]
 #[derive(Debug, PartialEq, Copy, Clone, Deserialize, Serialize)]
-
 pub struct AnimePowerStates {
+    pub brightness: u8,
     pub enabled: bool,
     pub boot_anim_enabled: bool,
 }
 
+#[cfg_attr(feature = "dbus", derive(Type))]
+#[derive(Debug, Copy, Clone, PartialEq, Eq, PartialOrd, Ord, Deserialize, Serialize)]
+pub enum AnimeType {
+    GA401,
+    GA402,
+}
+
+impl AnimeType {
+    /// The width of diagonal images
+    pub fn width(&self) -> usize {
+        match self {
+            AnimeType::GA401 => 74,
+            AnimeType::GA402 => 74,
+        }
+    }
+
+    /// The height of diagonal images
+    pub fn height(&self) -> usize {
+        match self {
+            AnimeType::GA401 => 36,
+            AnimeType::GA402 => 39,
+        }
+    }
+
+    /// The length of usable data for this type
+    pub fn data_length(&self) -> usize {
+        match self {
+            AnimeType::GA401 => PANE_LEN * 2,
+            AnimeType::GA402 => PANE_LEN * 3,
+        }
+    }
+}
+
 /// The minimal serializable data that can be transferred over wire types.
 /// Other data structures in `rog_anime` will convert to this.
 #[cfg_attr(feature = "dbus", derive(Type))]
 #[derive(Debug, Clone, Deserialize, Serialize)]
-pub struct AnimeDataBuffer(Vec<u8>);
-
-impl Default for AnimeDataBuffer {
-    fn default() -> Self {
-        Self::new()
-    }
+pub struct AnimeDataBuffer {
+    data: Vec<u8>,
+    anime: AnimeType,
 }
 
 impl AnimeDataBuffer {
     #[inline]
-    pub fn new() -> Self {
-        AnimeDataBuffer(vec![0u8; ANIME_DATA_LEN])
+    pub fn new(anime: AnimeType) -> Self {
+        let len = anime.data_length();
+
+        AnimeDataBuffer {
+            data: vec![0u8; len],
+            anime,
+        }
     }
 
     /// Get the inner data buffer
     #[inline]
-    pub fn get(&self) -> &[u8] {
-        &self.0
+    pub fn data(&self) -> &[u8] {
+        &self.data
     }
 
     /// Get a mutable slice of the inner buffer
     #[inline]
-    pub fn get_mut(&mut self) -> &mut [u8] {
-        &mut self.0
+    pub fn data_mut(&mut self) -> &mut [u8] {
+        &mut self.data
     }
 
     /// Create from a vector of bytes
@@ -68,35 +106,51 @@ impl AnimeDataBuffer {
     /// # Panics
     /// Will panic if the vector length is not `ANIME_DATA_LEN`
     #[inline]
-    pub fn from_vec(input: Vec<u8>) -> Self {
-        assert_eq!(input.len(), ANIME_DATA_LEN);
-        Self(input)
+    pub fn from_vec(anime: AnimeType, data: Vec<u8>) -> Result<Self> {
+        if data.len() != anime.data_length() {
+            return Err(AnimeError::DataBufferLength);
+        }
+
+        Ok(Self { data, anime })
     }
 }
 
 /// The two packets to be written to USB
-pub type AnimePacketType = [[u8; 640]; 2];
+pub type AnimePacketType = Vec<[u8; 640]>;
 
-impl From<AnimeDataBuffer> for AnimePacketType {
-    #[inline]
-    fn from(anime: AnimeDataBuffer) -> Self {
-        assert!(anime.0.len() == ANIME_DATA_LEN);
-        let mut buffers = [[0; 640]; 2];
-        for (idx, chunk) in anime.0.as_slice().chunks(PANE_LEN).enumerate() {
+impl TryFrom<AnimeDataBuffer> for AnimePacketType {
+    type Error = AnimeError;
+
+    fn try_from(anime: AnimeDataBuffer) -> std::result::Result<Self, Self::Error> {
+        if anime.data.len() != anime.anime.data_length() {
+            return Err(AnimeError::DataBufferLength);
+        }
+
+        let mut buffers = match anime.anime {
+            AnimeType::GA401 => vec![[0; 640]; 2],
+            AnimeType::GA402 => vec![[0; 640]; 3],
+        };
+
+        for (idx, chunk) in anime.data.as_slice().chunks(PANE_LEN).enumerate() {
             buffers[idx][BLOCK_START..BLOCK_END].copy_from_slice(chunk);
         }
         buffers[0][..7].copy_from_slice(&USB_PREFIX1);
         buffers[1][..7].copy_from_slice(&USB_PREFIX2);
-        buffers
+
+        if matches!(anime.anime, AnimeType::GA402) {
+            buffers[2][..7].copy_from_slice(&USB_PREFIX3);
+        }
+        Ok(buffers)
     }
 }
 
 /// This runs the animations as a blocking loop by using the `callback` to write data
+///
+/// If `callback` is `Ok(true)` then `run_animation` will exit the animation loop early.
 pub fn run_animation(
     frames: &AnimeGif,
-    do_early_return: Arc<AtomicBool>,
-    callback: &dyn Fn(AnimeDataBuffer) -> Result<(), AnimeError>,
-) -> Result<(), AnimeError> {
+    callback: &dyn Fn(AnimeDataBuffer) -> Result<bool>,
+) -> Result<()> {
     let mut count = 0;
     let start = Instant::now();
 
@@ -140,14 +194,11 @@ pub fn run_animation(
     'animation: loop {
         for frame in frames.frames() {
             let frame_start = Instant::now();
-            if do_early_return.load(Ordering::SeqCst) {
-                return Ok(());
-            }
             let mut output = frame.frame().clone();
 
             if let AnimTime::Fade(_) = frames.duration() {
                 if frame_start <= start + fade_in {
-                    for pixel in output.get_mut() {
+                    for pixel in output.data_mut() {
                         *pixel = (*pixel as f32 * fade_in_accum) as u8;
                     }
                     fade_in_accum = fade_in_step * (frame_start - start).as_secs_f32();
@@ -158,18 +209,20 @@ pub fn run_animation(
                     } else {
                         fade_out_accum = 0.0;
                     }
-                    for pixel in output.get_mut() {
+                    for pixel in output.data_mut() {
                         *pixel = (*pixel as f32 * fade_out_accum) as u8;
                     }
                 }
             }
 
-            callback(output)?;
+            if matches!(callback(output), Ok(true)) {
+                info!("rog-anime: frame-loop callback asked to exit early");
+                return Ok(());
+            }
 
             if timed && Instant::now().duration_since(start) > run_time {
                 break 'animation;
             }
-
             sleep(frame.delay());
         }
         if let AnimTime::Count(times) = frames.duration() {

rog-anime/src/diagonal.rs

@@ -1,40 +1,36 @@
 use std::{path::Path, time::Duration};
 
 use crate::{
-    data::{AnimeDataBuffer, ANIME_DATA_LEN},
-    error::AnimeError,
+    data::AnimeDataBuffer,
+    error::{AnimeError, Result},
+    AnimeType,
 };
 
-const WIDTH: usize = 74;
-const HEIGHT: usize = 36;
-
 /// Mostly intended to be used with ASUS gifs, but can be used for other purposes (like images)
 #[derive(Debug, Clone)]
-pub struct AnimeDiagonal([[u8; WIDTH]; HEIGHT], Option<Duration>);
-
-impl Default for AnimeDiagonal {
-    #[inline]
-    fn default() -> Self {
-        Self::new(None)
-    }
-}
+pub struct AnimeDiagonal(AnimeType, Vec<Vec<u8>>, Option<Duration>);
 
 impl AnimeDiagonal {
     #[inline]
-    pub fn new(duration: Option<Duration>) -> Self {
-        Self([[0u8; WIDTH]; HEIGHT], duration)
+    pub fn new(anime_type: AnimeType, duration: Option<Duration>) -> Self {
+        Self(
+            anime_type,
+            vec![vec![0; anime_type.width()]; anime_type.height()],
+            duration,
+        )
     }
 
     #[inline]
-    pub fn get_mut(&mut self) -> &mut [[u8; WIDTH]; HEIGHT] {
-        &mut self.0
+    pub fn get_mut(&mut self) -> &mut Vec<Vec<u8>> {
+        &mut self.1
     }
 
     /// Get a full diagonal row where `x` `y` is the starting point  and `len` is the length of data.
     fn get_row(&self, x: usize, y: usize, len: usize) -> Vec<u8> {
         let mut buf = Vec::with_capacity(len);
         for i in 0..len {
-            let val = self.0[HEIGHT - y - i - 1][x + i];
+            let y = self.0.height() - y - i - 1;
+            let val = self.1[y][x + i];
             buf.push(val);
         }
         buf
@@ -47,13 +43,14 @@ impl AnimeDiagonal {
         path: &Path,
         duration: Option<Duration>,
         bright: f32,
-    ) -> Result<Self, AnimeError> {
+        anime_type: AnimeType,
+    ) -> Result<Self> {
         let data = std::fs::read(path)?;
         let data = std::io::Cursor::new(data);
         let decoder = png_pong::Decoder::new(data)?.into_steps();
         let png_pong::Step { raster, delay: _ } = decoder.last().ok_or(AnimeError::NoFrames)??;
 
-        let mut matrix = AnimeDiagonal::new(duration);
+        let mut matrix = AnimeDiagonal::new(anime_type, duration);
 
         match raster {
             png_pong::PngRaster::Gray8(ras) => {
@@ -100,7 +97,9 @@ impl AnimeDiagonal {
                         + (<u8>::from(px.two()) / 3) as f32
                         + (<u8>::from(px.three()) / 3) as f32
                 };
-                matrix.0[y][x] = (v * bright) as u8;
+                if y < matrix.1.len() && x < matrix.1[y].len() {
+                    matrix.1[y][x] = (v * bright) as u8;
+                }
             }
         }
     }
@@ -123,75 +122,547 @@ impl AnimeDiagonal {
                         + ((<u16>::from(px.two()) / 3) >> 8) as f32
                         + ((<u16>::from(px.three()) / 3) >> 8) as f32
                 };
-                matrix.0[y][x] = (v * bright) as u8;
+                matrix.1[y][x] = (v * bright) as u8;
             }
         }
     }
-}
 
-impl From<&AnimeDiagonal> for AnimeDataBuffer {
+    /// Convert to a data buffer that can be sent over dbus
+    #[inline]
+    pub fn into_data_buffer(&self, anime_type: AnimeType) -> Result<AnimeDataBuffer> {
+        match anime_type {
+            AnimeType::GA401 => self.into_ga401_packets(),
+            AnimeType::GA402 => self.into_ga402_packets(),
+        }
+    }
+
     /// Do conversion from the nested Vec in AnimeMatrix to the two required
     /// packets suitable for sending over USB
-    #[inline]
-    fn from(anime: &AnimeDiagonal) -> Self {
-        let mut buf = vec![0u8; ANIME_DATA_LEN];
+    fn into_ga401_packets(&self) -> Result<AnimeDataBuffer> {
+        let mut buf = vec![0u8; AnimeType::GA401.data_length()];
 
-        buf[1..=32].copy_from_slice(&anime.get_row(0, 3, 32));
-        buf[34..=66].copy_from_slice(&anime.get_row(0, 2, 33));
-        buf[69..=101].copy_from_slice(&anime.get_row(1, 2, 33)); // ?!
-        buf[102..=134].copy_from_slice(&anime.get_row(1, 1, 33));
-        buf[137..=169].copy_from_slice(&anime.get_row(2, 1, 33));
-        buf[170..=202].copy_from_slice(&anime.get_row(2, 0, 33));
-        buf[204..=236].copy_from_slice(&anime.get_row(3, 0, 33));
-        buf[237..=268].copy_from_slice(&anime.get_row(4, 0, 32));
-        buf[270..=301].copy_from_slice(&anime.get_row(5, 0, 32));
-        buf[302..=332].copy_from_slice(&anime.get_row(6, 0, 31));
-        buf[334..=364].copy_from_slice(&anime.get_row(7, 0, 31));
-        buf[365..=394].copy_from_slice(&anime.get_row(8, 0, 30));
-        buf[396..=425].copy_from_slice(&anime.get_row(9, 0, 30));
-        buf[426..=454].copy_from_slice(&anime.get_row(10, 0, 29));
-        buf[456..=484].copy_from_slice(&anime.get_row(11, 0, 29));
-        buf[485..=512].copy_from_slice(&anime.get_row(12, 0, 28));
-        buf[514..=541].copy_from_slice(&anime.get_row(13, 0, 28));
-        buf[542..=568].copy_from_slice(&anime.get_row(14, 0, 27));
-        buf[570..=596].copy_from_slice(&anime.get_row(15, 0, 27));
-        buf[597..=622].copy_from_slice(&anime.get_row(16, 0, 26));
-        buf[624..=649].copy_from_slice(&anime.get_row(17, 0, 26));
-        buf[650..=674].copy_from_slice(&anime.get_row(18, 0, 25));
-        buf[676..=700].copy_from_slice(&anime.get_row(19, 0, 25));
-        buf[701..=724].copy_from_slice(&anime.get_row(20, 0, 24));
-        buf[726..=749].copy_from_slice(&anime.get_row(21, 0, 24));
-        buf[750..=772].copy_from_slice(&anime.get_row(22, 0, 23));
-        buf[774..=796].copy_from_slice(&anime.get_row(23, 0, 23));
-        buf[797..=818].copy_from_slice(&anime.get_row(24, 0, 22));
-        buf[820..=841].copy_from_slice(&anime.get_row(25, 0, 22));
-        buf[842..=862].copy_from_slice(&anime.get_row(26, 0, 21));
-        buf[864..=884].copy_from_slice(&anime.get_row(27, 0, 21));
-        buf[885..=904].copy_from_slice(&anime.get_row(28, 0, 20));
-        buf[906..=925].copy_from_slice(&anime.get_row(29, 0, 20));
-        buf[926..=944].copy_from_slice(&anime.get_row(30, 0, 19));
-        buf[946..=964].copy_from_slice(&anime.get_row(31, 0, 19));
-        buf[965..=982].copy_from_slice(&anime.get_row(32, 0, 18));
-        buf[984..=1001].copy_from_slice(&anime.get_row(33, 0, 18));
-        buf[1002..=1018].copy_from_slice(&anime.get_row(34, 0, 17));
-        buf[1020..=1036].copy_from_slice(&anime.get_row(35, 0, 17));
-        buf[1037..=1052].copy_from_slice(&anime.get_row(36, 0, 16));
-        buf[1054..=1069].copy_from_slice(&anime.get_row(37, 0, 16));
-        buf[1070..=1084].copy_from_slice(&anime.get_row(38, 0, 15));
-        buf[1086..=1100].copy_from_slice(&anime.get_row(39, 0, 15));
-        buf[1101..=1114].copy_from_slice(&anime.get_row(40, 0, 14));
-        buf[1116..=1129].copy_from_slice(&anime.get_row(41, 0, 14));
-        buf[1130..=1142].copy_from_slice(&anime.get_row(42, 0, 13));
-        buf[1144..=1156].copy_from_slice(&anime.get_row(43, 0, 13));
-        buf[1157..=1168].copy_from_slice(&anime.get_row(44, 0, 12));
-        buf[1170..=1181].copy_from_slice(&anime.get_row(45, 0, 12));
-        buf[1182..=1192].copy_from_slice(&anime.get_row(46, 0, 11));
-        buf[1194..=1204].copy_from_slice(&anime.get_row(47, 0, 11));
-        buf[1205..=1214].copy_from_slice(&anime.get_row(48, 0, 10));
-        buf[1216..=1225].copy_from_slice(&anime.get_row(49, 0, 10));
-        buf[1226..=1234].copy_from_slice(&anime.get_row(50, 0, 9));
-        buf[1236..=1244].copy_from_slice(&anime.get_row(51, 0, 9));
+        buf[1..=32].copy_from_slice(&self.get_row(0, 3, 32));
+        buf[34..=66].copy_from_slice(&self.get_row(0, 2, 33));
+        buf[69..=101].copy_from_slice(&self.get_row(1, 2, 33)); // ?!
+        buf[102..=134].copy_from_slice(&self.get_row(1, 1, 33));
+        buf[137..=169].copy_from_slice(&self.get_row(2, 1, 33));
+        buf[170..=202].copy_from_slice(&self.get_row(2, 0, 33));
+        buf[204..=236].copy_from_slice(&self.get_row(3, 0, 33)); // This and above cause overflow?
+        buf[237..=268].copy_from_slice(&self.get_row(4, 0, 32));
+        buf[270..=301].copy_from_slice(&self.get_row(5, 0, 32));
+        buf[302..=332].copy_from_slice(&self.get_row(6, 0, 31));
+        buf[334..=364].copy_from_slice(&self.get_row(7, 0, 31));
+        buf[365..=394].copy_from_slice(&self.get_row(8, 0, 30));
+        buf[396..=425].copy_from_slice(&self.get_row(9, 0, 30));
+        buf[426..=454].copy_from_slice(&self.get_row(10, 0, 29));
+        buf[456..=484].copy_from_slice(&self.get_row(11, 0, 29));
+        buf[485..=512].copy_from_slice(&self.get_row(12, 0, 28));
+        buf[514..=541].copy_from_slice(&self.get_row(13, 0, 28));
+        buf[542..=568].copy_from_slice(&self.get_row(14, 0, 27));
+        buf[570..=596].copy_from_slice(&self.get_row(15, 0, 27));
+        buf[597..=622].copy_from_slice(&self.get_row(16, 0, 26));
+        buf[624..=649].copy_from_slice(&self.get_row(17, 0, 26));
+        buf[650..=674].copy_from_slice(&self.get_row(18, 0, 25));
+        buf[676..=700].copy_from_slice(&self.get_row(19, 0, 25));
+        buf[701..=724].copy_from_slice(&self.get_row(20, 0, 24));
+        buf[726..=749].copy_from_slice(&self.get_row(21, 0, 24));
+        buf[750..=772].copy_from_slice(&self.get_row(22, 0, 23));
+        buf[774..=796].copy_from_slice(&self.get_row(23, 0, 23));
+        buf[797..=818].copy_from_slice(&self.get_row(24, 0, 22));
+        buf[820..=841].copy_from_slice(&self.get_row(25, 0, 22));
+        buf[842..=862].copy_from_slice(&self.get_row(26, 0, 21));
+        buf[864..=884].copy_from_slice(&self.get_row(27, 0, 21));
+        buf[885..=904].copy_from_slice(&self.get_row(28, 0, 20));
+        buf[906..=925].copy_from_slice(&self.get_row(29, 0, 20));
+        buf[926..=944].copy_from_slice(&self.get_row(30, 0, 19));
+        buf[946..=964].copy_from_slice(&self.get_row(31, 0, 19));
+        buf[965..=982].copy_from_slice(&self.get_row(32, 0, 18));
+        buf[984..=1001].copy_from_slice(&self.get_row(33, 0, 18));
+        buf[1002..=1018].copy_from_slice(&self.get_row(34, 0, 17));
+        buf[1020..=1036].copy_from_slice(&self.get_row(35, 0, 17));
+        buf[1037..=1052].copy_from_slice(&self.get_row(36, 0, 16));
+        buf[1054..=1069].copy_from_slice(&self.get_row(37, 0, 16));
+        buf[1070..=1084].copy_from_slice(&self.get_row(38, 0, 15));
+        buf[1086..=1100].copy_from_slice(&self.get_row(39, 0, 15));
+        buf[1101..=1114].copy_from_slice(&self.get_row(40, 0, 14));
+        buf[1116..=1129].copy_from_slice(&self.get_row(41, 0, 14));
+        buf[1130..=1142].copy_from_slice(&self.get_row(42, 0, 13));
+        buf[1144..=1156].copy_from_slice(&self.get_row(43, 0, 13));
+        buf[1157..=1168].copy_from_slice(&self.get_row(44, 0, 12));
+        buf[1170..=1181].copy_from_slice(&self.get_row(45, 0, 12));
+        buf[1182..=1192].copy_from_slice(&self.get_row(46, 0, 11));
+        buf[1194..=1204].copy_from_slice(&self.get_row(47, 0, 11));
+        buf[1205..=1214].copy_from_slice(&self.get_row(48, 0, 10));
+        buf[1216..=1225].copy_from_slice(&self.get_row(49, 0, 10));
+        buf[1226..=1234].copy_from_slice(&self.get_row(50, 0, 9));
+        buf[1236..=1244].copy_from_slice(&self.get_row(51, 0, 9));
 
-        AnimeDataBuffer::from_vec(buf)
+        AnimeDataBuffer::from_vec(crate::AnimeType::GA401, buf)
+    }
+
+    fn into_ga402_packets(&self) -> Result<AnimeDataBuffer> {
+        let mut buf = vec![0u8; AnimeType::GA402.data_length()];
+        let mut start_index: usize = 0;
+
+        fn copy_slice(
+            buf: &mut Vec<u8>,
+            anime: &AnimeDiagonal,
+            x: usize,
+            y: usize,
+            start_index: &mut usize,
+            len: usize,
+        ) {
+            buf[*start_index..*start_index + len].copy_from_slice(&anime.get_row(x, y, len));
+            *start_index += len;
+        }
+
+        let b = &mut buf;
+        let a = &self;
+        copy_slice(b, a, 0, 5, &mut start_index, 34);
+        copy_slice(b, a, 1, 5, &mut start_index, 34);
+        copy_slice(b, a, 1, 4, &mut start_index, 34);
+        copy_slice(b, a, 2, 4, &mut start_index, 34);
+        copy_slice(b, a, 2, 3, &mut start_index, 34);
+        copy_slice(b, a, 3, 3, &mut start_index, 34);
+        copy_slice(b, a, 3, 2, &mut start_index, 34);
+        copy_slice(b, a, 4, 2, &mut start_index, 34);
+        copy_slice(b, a, 4, 1, &mut start_index, 34);
+        copy_slice(b, a, 5, 1, &mut start_index, 34);
+        copy_slice(b, a, 5, 0, &mut start_index, 34);
+        copy_slice(b, a, 6, 0, &mut start_index, 34);
+        copy_slice(b, a, 7, 0, &mut start_index, 33);
+        copy_slice(b, a, 8, 0, &mut start_index, 33);
+        copy_slice(b, a, 9, 0, &mut start_index, 32);
+        copy_slice(b, a, 10, 0, &mut start_index, 32);
+        copy_slice(b, a, 11, 0, &mut start_index, 31);
+        copy_slice(b, a, 12, 0, &mut start_index, 31);
+        copy_slice(b, a, 13, 0, &mut start_index, 30);
+        copy_slice(b, a, 14, 0, &mut start_index, 30);
+        copy_slice(b, a, 15, 0, &mut start_index, 29);
+        copy_slice(b, a, 16, 0, &mut start_index, 29);
+        copy_slice(b, a, 17, 0, &mut start_index, 28);
+        copy_slice(b, a, 18, 0, &mut start_index, 28);
+        copy_slice(b, a, 19, 0, &mut start_index, 27);
+        copy_slice(b, a, 20, 0, &mut start_index, 27);
+        copy_slice(b, a, 21, 0, &mut start_index, 26);
+        copy_slice(b, a, 22, 0, &mut start_index, 26);
+        copy_slice(b, a, 23, 0, &mut start_index, 25);
+        copy_slice(b, a, 24, 0, &mut start_index, 25);
+        copy_slice(b, a, 25, 0, &mut start_index, 24);
+        copy_slice(b, a, 26, 0, &mut start_index, 24);
+        copy_slice(b, a, 27, 0, &mut start_index, 23);
+        copy_slice(b, a, 28, 0, &mut start_index, 23);
+        copy_slice(b, a, 29, 0, &mut start_index, 22);
+        copy_slice(b, a, 30, 0, &mut start_index, 22);
+        copy_slice(b, a, 31, 0, &mut start_index, 21);
+        copy_slice(b, a, 32, 0, &mut start_index, 21);
+        copy_slice(b, a, 33, 0, &mut start_index, 20);
+        copy_slice(b, a, 34, 0, &mut start_index, 20);
+        copy_slice(b, a, 35, 0, &mut start_index, 19);
+        copy_slice(b, a, 36, 0, &mut start_index, 19);
+        copy_slice(b, a, 37, 0, &mut start_index, 18);
+        copy_slice(b, a, 38, 0, &mut start_index, 18);
+        copy_slice(b, a, 39, 0, &mut start_index, 17);
+        copy_slice(b, a, 40, 0, &mut start_index, 17);
+        copy_slice(b, a, 41, 0, &mut start_index, 16);
+        copy_slice(b, a, 42, 0, &mut start_index, 16);
+        copy_slice(b, a, 43, 0, &mut start_index, 15);
+        copy_slice(b, a, 44, 0, &mut start_index, 15);
+        copy_slice(b, a, 45, 0, &mut start_index, 14);
+        copy_slice(b, a, 46, 0, &mut start_index, 14);
+        copy_slice(b, a, 47, 0, &mut start_index, 13);
+        copy_slice(b, a, 48, 0, &mut start_index, 13);
+        copy_slice(b, a, 49, 0, &mut start_index, 12);
+        copy_slice(b, a, 50, 0, &mut start_index, 12);
+        copy_slice(b, a, 51, 0, &mut start_index, 11);
+        copy_slice(b, a, 52, 0, &mut start_index, 11);
+        copy_slice(b, a, 53, 0, &mut start_index, 10);
+        copy_slice(b, a, 54, 0, &mut start_index, 10);
+        copy_slice(b, a, 55, 0, &mut start_index, 9);
+
+        AnimeDataBuffer::from_vec(crate::AnimeType::GA402, buf)
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use std::{convert::TryFrom, path::PathBuf};
+
+    use crate::{AnimeDiagonal, AnimePacketType, AnimeType};
+
+    #[test]
+    fn ga401_diagonal_packet_check() {
+        let pkt0_check = [
+            0x5e, 0xc0, 0x2, 0x1, 0x0, 0x73, 0x2, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0x0, 0xff, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0x0, 0xff, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff,
+            0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0,
+        ];
+        let pkt1_check = [
+            0x5e, 0xc0, 0x2, 0x74, 0x2, 0x73, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0xff, 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+        ];
+
+        let mut path = PathBuf::from(env!("CARGO_MANIFEST_DIR"));
+        path.push("test/ga401-diagonal.png");
+
+        let matrix = AnimeDiagonal::from_png(&path, None, 255.0, AnimeType::GA401).unwrap();
+        let data = matrix.into_data_buffer(crate::AnimeType::GA401).unwrap();
+        let pkt = AnimePacketType::try_from(data).unwrap();
+
+        assert_eq!(pkt[0], pkt0_check);
+        assert_eq!(pkt[1], pkt1_check);
+    }
+
+    #[test]
+    fn ga402_diagonal_packet_check() {
+        let pkt0_check = [
+            0x5e, 0xc0, 0x2, 0x1, 0x0, 0x73, 0x2, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0,
+        ];
+        let pkt1_check = [
+            0x5e, 0xc0, 0x2, 0x74, 0x2, 0x73, 0x2, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+        ];
+        let pkt2_check = [
+            0x5e, 0xc0, 0x2, 0xe7, 0x4, 0x73, 0x2, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff,
+            0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff,
+            0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+        ];
+
+        let mut path = PathBuf::from(env!("CARGO_MANIFEST_DIR"));
+        path.push("test/ga402-diagonal.png");
+
+        let matrix = AnimeDiagonal::from_png(&path, None, 255.0, AnimeType::GA402).unwrap();
+        let data = matrix.into_data_buffer(crate::AnimeType::GA402).unwrap();
+        let pkt = AnimePacketType::try_from(data).unwrap();
+
+        assert_eq!(pkt[0], pkt0_check);
+        assert_eq!(pkt[1], pkt1_check);
+        assert_eq!(pkt[2], pkt2_check);
+    }
+
+    #[test]
+    #[ignore = "Needs the packets verified with capture"]
+    fn ga402_diagonal_fullbright_packet_check() {
+        let pkt0_check = [
+            0x5e, 0xc0, 0x2, 0x1, 0x0, 0x73, 0x2, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x68, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x67, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+        ];
+        let pkt1_check = [
+            0x5e, 0xc0, 0x2, 0x74, 0x2, 0x73, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+        ];
+        let pkt2_check = [
+            0x5e, 0xc0, 0x2, 0xe7, 0x4, 0x73, 0x2, 0xff, 0xff, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+            0xff, 0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+        ];
+
+        let mut path = PathBuf::from(env!("CARGO_MANIFEST_DIR"));
+        path.push("test/ga402-diagonal-fullbright.png");
+
+        let matrix = AnimeDiagonal::from_png(&path, None, 255.0, AnimeType::GA402).unwrap();
+        let data = matrix.into_data_buffer(crate::AnimeType::GA402).unwrap();
+        let pkt = AnimePacketType::try_from(data).unwrap();
+
+        assert_eq!(pkt[0], pkt0_check);
+        assert_eq!(pkt[1], pkt1_check);
+        assert_eq!(pkt[2], pkt2_check);
     }
 }

rog-anime/src/error.rs

@@ -3,6 +3,8 @@ use png_pong::decode::Error as PngError;
 use std::error::Error;
 use std::fmt;
 
+pub type Result<T> = std::result::Result<T, AnimeError>;
+
 #[derive(Debug)]
 pub enum AnimeError {
     NoFrames,
@@ -13,6 +15,13 @@ pub enum AnimeError {
     /// The input was incorrect size, expected size is `IncorrectSize(width, height)`
     IncorrectSize(u32, u32),
     Dbus(String),
+    Udev(String, std::io::Error),
+    NoDevice,
+    UnsupportedDevice,
+    InvalidBrightness(f32),
+    DataBufferLength,
+    PixelGifWidth(usize),
+    PixelGifHeight(usize),
 }
 
 impl fmt::Display for AnimeError {
@@ -30,6 +39,25 @@ impl fmt::Display for AnimeError {
                 width, height
             ),
             AnimeError::Dbus(detail) => write!(f, "{}", detail),
+            AnimeError::Udev(deets, error) => write!(f, "udev {}: {}", deets, error),
+            AnimeError::NoDevice => write!(f, "No AniMe Matrix device found"),
+            AnimeError::DataBufferLength => write!(
+                f,
+                "The data buffer was incorrect length for generating USB packets"
+            ),
+            AnimeError::UnsupportedDevice => write!(f, "Unsupported AniMe Matrix device found"),
+            AnimeError::InvalidBrightness(bright) => write!(
+                f,
+                "Image brightness must be between 0.0 and 1.0 (inclusive), was {}",
+                bright
+            ),
+            AnimeError::PixelGifWidth(n) => {
+                write!(f, "The gif used for pixel-perfect gif is is wider than {n}")
+            }
+            AnimeError::PixelGifHeight(n) => write!(
+                f,
+                "The gif used for pixel-perfect gif is is taller than {n}"
+            ),
         }
     }
 }
@@ -56,3 +84,10 @@ impl From<DecodingError> for AnimeError {
         AnimeError::Gif(err)
     }
 }
+
+impl From<AnimeError> for zbus::fdo::Error {
+    #[inline]
+    fn from(err: AnimeError) -> Self {
+        zbus::fdo::Error::Failed(format!("{}", err))
+    }
+}

rog-anime/src/gif.rs

@@ -1,8 +1,10 @@
 use glam::Vec2;
 use serde_derive::{Deserialize, Serialize};
+use std::convert::TryFrom;
 use std::{fs::File, path::Path, time::Duration};
 
-use crate::{error::AnimeError, AnimeDataBuffer, AnimeDiagonal, AnimeImage, Pixel};
+use crate::error::AnimeError;
+use crate::{error::Result, AnimeDataBuffer, AnimeDiagonal, AnimeImage, AnimeType, Pixel};
 
 #[derive(Debug, Clone, Deserialize, Serialize)]
 pub struct AnimeFrame {
@@ -88,12 +90,13 @@ pub struct AnimeGif(Vec<AnimeFrame>, AnimTime);
 impl AnimeGif {
     /// Create an animation using the 74x36 ASUS gif format
     #[inline]
-    pub fn create_diagonal_gif(
+    pub fn from_diagonal_gif(
         file_name: &Path,
         duration: AnimTime,
         brightness: f32,
-    ) -> Result<Self, AnimeError> {
-        let mut matrix = AnimeDiagonal::new(None);
+        anime_type: AnimeType,
+    ) -> Result<Self> {
+        let mut matrix = AnimeDiagonal::new(anime_type, None);
 
         let mut decoder = gif::DecodeOptions::new();
         // Configure the decoder such that it will expand the image to RGBA.
@@ -115,13 +118,22 @@ impl AnimeGif {
                         // should be t but not in some gifs? What, ASUS, what?
                         continue;
                     }
-                    matrix.get_mut()[y + frame.top as usize][x + frame.left as usize] =
-                        (px[0] as f32 * brightness) as u8;
+                    let tmp = matrix.get_mut();
+                    let y = y + frame.top as usize;
+                    if y >= tmp.len() {
+                        return Err(AnimeError::PixelGifHeight(tmp.len()));
+                    }
+                    let x = x + frame.left as usize;
+                    if x >= tmp[y].len() {
+                        return Err(AnimeError::PixelGifWidth(tmp[y].len()));
+                    }
+
+                    matrix.get_mut()[y][x] = (px[0] as f32 * brightness) as u8;
                 }
             }
 
             frames.push(AnimeFrame {
-                data: <AnimeDataBuffer>::from(&matrix),
+                data: matrix.into_data_buffer(anime_type)?,
                 delay: Duration::from_millis(wait as u64),
             });
         }
@@ -130,12 +142,13 @@ impl AnimeGif {
 
     /// Create an animation using the 74x36 ASUS gif format from a png
     #[inline]
-    pub fn create_diagonal_png(
+    pub fn from_diagonal_png(
         file_name: &Path,
+        anime_type: AnimeType,
         duration: AnimTime,
         brightness: f32,
-    ) -> Result<Self, AnimeError> {
-        let image = AnimeDiagonal::from_png(file_name, None, brightness)?;
+    ) -> Result<Self> {
+        let image = AnimeDiagonal::from_png(file_name, None, brightness, anime_type)?;
 
         let mut total = Duration::from_millis(1000);
         if let AnimTime::Fade(fade) = duration {
@@ -148,7 +161,7 @@ impl AnimeGif {
         let frame_count = total.as_millis() / 30;
 
         let single = AnimeFrame {
-            data: <AnimeDataBuffer>::from(&image),
+            data: image.into_data_buffer(anime_type)?,
             delay: Duration::from_millis(30),
         };
         let frames = vec![single; frame_count as usize];
@@ -159,14 +172,15 @@ impl AnimeGif {
     /// Create an animation using a gif of any size. This method must precompute the
     /// result.
     #[inline]
-    pub fn create_png_gif(
+    pub fn from_gif(
         file_name: &Path,
         scale: f32,
         angle: f32,
         translation: Vec2,
         duration: AnimTime,
         brightness: f32,
-    ) -> Result<Self, AnimeError> {
+        anime_type: AnimeType,
+    ) -> Result<Self> {
         let mut frames = Vec::new();
 
         let mut decoder = gif::DecodeOptions::new();
@@ -187,7 +201,8 @@ impl AnimeGif {
             brightness,
             pixels,
             decoder.width() as u32,
-        );
+            anime_type,
+        )?;
 
         while let Some(frame) = decoder.read_next_frame()? {
             let wait = frame.delay * 10;
@@ -201,7 +216,8 @@ impl AnimeGif {
                     brightness,
                     pixels,
                     width as u32,
-                );
+                    anime_type,
+                )?;
             }
             for (y, row) in frame.buffer.chunks(frame.width as usize * 4).enumerate() {
                 for (x, px) in row.chunks(4).enumerate() {
@@ -220,7 +236,7 @@ impl AnimeGif {
             image.update();
 
             frames.push(AnimeFrame {
-                data: <AnimeDataBuffer>::from(&image),
+                data: <AnimeDataBuffer>::try_from(&image)?,
                 delay: Duration::from_millis(wait as u64),
             });
         }
@@ -231,15 +247,17 @@ impl AnimeGif {
     /// will be 1 second long. If `AnimTime::Cycles` is specified for `duration` then this can
     /// be considered how many seconds the image will show for.
     #[inline]
-    pub fn create_png_static(
+    pub fn from_png(
         file_name: &Path,
         scale: f32,
         angle: f32,
         translation: Vec2,
         duration: AnimTime,
         brightness: f32,
-    ) -> Result<Self, AnimeError> {
-        let image = AnimeImage::from_png(file_name, scale, angle, translation, brightness)?;
+        anime_type: AnimeType,
+    ) -> Result<Self> {
+        let image =
+            AnimeImage::from_png(file_name, scale, angle, translation, brightness, anime_type)?;
 
         let mut total = Duration::from_millis(1000);
         if let AnimTime::Fade(fade) = duration {
@@ -252,7 +270,7 @@ impl AnimeGif {
         let frame_count = total.as_millis() / 30;
 
         let single = AnimeFrame {
-            data: <AnimeDataBuffer>::from(&image),
+            data: <AnimeDataBuffer>::try_from(&image)?,
             delay: Duration::from_millis(30),
         };
         let frames = vec![single; frame_count as usize];

rog-anime/src/grid.rs

@@ -1,8 +1,10 @@
-use std::time::Duration;
+use std::convert::TryFrom;
 
-use crate::data::{AnimeDataBuffer, ANIME_DATA_LEN};
-use crate::image::LED_IMAGE_POSITIONS;
+use crate::data::AnimeDataBuffer;
+use crate::error::{AnimeError, Result};
+use crate::{AnimeImage, AnimeType};
 
+// TODO: Adjust these sizes as WIDTH_GA401 WIDTH_GA402
 const WIDTH: usize = 33;
 const HEIGHT: usize = 55;
 
@@ -14,41 +16,40 @@ const HEIGHT: usize = 55;
 ///
 /// **Note:** the columns in each odd row are offset by half a pixel left
 #[derive(Debug, Clone)]
-pub struct AnimeGrid([[u8; WIDTH]; HEIGHT], Option<Duration>);
-
-impl Default for AnimeGrid {
-    #[inline]
-    fn default() -> Self {
-        Self::new(None)
-    }
+pub struct AnimeGrid {
+    anime_type: AnimeType,
+    data: [[u8; WIDTH]; HEIGHT],
 }
 
 impl AnimeGrid {
     #[inline]
-    pub fn new(duration: Option<Duration>) -> Self {
-        AnimeGrid([[0u8; WIDTH]; HEIGHT], duration)
+    pub fn new(anime_type: AnimeType) -> Self {
+        Self {
+            anime_type,
+            data: [[0u8; WIDTH]; HEIGHT],
+        }
     }
 
     /// Set a position in the grid with a brightness value
     #[inline]
     pub fn set(&mut self, x: usize, y: usize, b: u8) {
-        self.0[y][x] = b;
+        self.data[y][x] = b;
     }
 
     #[inline]
     pub fn get(&self) -> &[[u8; WIDTH]; HEIGHT] {
-        &self.0
+        &self.data
     }
 
     #[inline]
     pub fn get_mut(&mut self) -> &mut [[u8; WIDTH]; HEIGHT] {
-        &mut self.0
+        &mut self.data
     }
 
     /// Fill the grid with a value
     #[inline]
     pub fn fill_with(&mut self, fill: u8) {
-        for row in self.0.iter_mut() {
+        for row in self.data.iter_mut() {
             for x in row.iter_mut() {
                 *x = fill;
             }
@@ -89,21 +90,25 @@ impl AnimeGrid {
     // }
 }
 
-impl From<AnimeGrid> for AnimeDataBuffer {
+impl TryFrom<AnimeGrid> for AnimeDataBuffer {
+    type Error = AnimeError;
+
     /// Do conversion from the nested Vec in AniMeMatrix to the two required
     /// packets suitable for sending over USB
-    #[inline]
-    fn from(anime: AnimeGrid) -> Self {
-        let mut buf = vec![0u8; ANIME_DATA_LEN];
+    fn try_from(anime: AnimeGrid) -> Result<Self> {
+        let mut buf = vec![0u8; anime.anime_type.data_length()];
 
-        for (idx, pos) in LED_IMAGE_POSITIONS.iter().enumerate() {
+        for (idx, pos) in AnimeImage::generate_image_positioning(anime.anime_type)
+            .iter()
+            .enumerate()
+        {
             if let Some(pos) = pos {
                 let x = pos.x().ceil() as usize;
                 let y = pos.y().ceil() as usize;
-                buf[idx + 1] = anime.0[y][x];
+                buf[idx + 1] = anime.data[y][x];
             }
         }
-        AnimeDataBuffer::from_vec(buf)
+        AnimeDataBuffer::from_vec(anime.anime_type, buf)
     }
 }
 
@@ -113,7 +118,7 @@ mod tests {
 
     #[test]
     fn check_data_alignment() {
-        let mut matrix = AnimeGrid::new(None);
+        let mut matrix = AnimeGrid::new(AnimeType::GA401);
         {
             let tmp = matrix.get_mut();
             for row in tmp.iter_mut() {
@@ -122,7 +127,7 @@ mod tests {
             }
         }
 
-        let matrix = <AnimeDataBuffer>::from(matrix);
+        let matrix = <AnimeDataBuffer>::try_from(matrix).unwrap();
 
         let data_cmp = [
             0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
@@ -171,6 +176,6 @@ mod tests {
             0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0,
             0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0,
         ];
-        assert_eq!(matrix.get(), &data_cmp);
+        assert_eq!(matrix.data(), &data_cmp);
     }
 }

rog-anime/src/sequencer.rs

@@ -1,9 +1,11 @@
-use std::{path::PathBuf, time::Duration};
-
 use glam::Vec2;
 use serde_derive::{Deserialize, Serialize};
+use std::convert::TryFrom;
+use std::{path::PathBuf, time::Duration};
 
-use crate::{error::AnimeError, AnimTime, AnimeDataBuffer, AnimeDiagonal, AnimeGif, AnimeImage};
+use crate::{
+    error::Result, AnimTime, AnimeDataBuffer, AnimeDiagonal, AnimeGif, AnimeImage, AnimeType,
+};
 
 /// All the possible AniMe actions that can be used. This enum is intended to be
 /// a helper for loading up `ActionData`.
@@ -63,26 +65,34 @@ pub enum ActionData {
 }
 
 impl ActionData {
-    pub fn from_anime_action(action: &ActionLoader) -> Result<ActionData, AnimeError> {
+    pub fn from_anime_action(anime_type: AnimeType, action: &ActionLoader) -> Result<ActionData> {
         let a = match action {
             ActionLoader::AsusAnimation {
                 file,
                 time,
                 brightness,
-            } => ActionData::Animation(AnimeGif::create_diagonal_gif(file, *time, *brightness)?),
+            } => ActionData::Animation(AnimeGif::from_diagonal_gif(
+                file,
+                *time,
+                *brightness,
+                anime_type,
+            )?),
             ActionLoader::AsusImage {
                 file,
                 time,
                 brightness,
             } => match time {
                 AnimTime::Infinite => {
-                    let image = AnimeDiagonal::from_png(file, None, *brightness)?;
-                    let data = <AnimeDataBuffer>::from(&image);
+                    let image = AnimeDiagonal::from_png(file, None, *brightness, anime_type)?;
+                    let data = image.into_data_buffer(anime_type)?;
                     ActionData::Image(Box::new(data))
                 }
-                _ => {
-                    ActionData::Animation(AnimeGif::create_diagonal_png(file, *time, *brightness)?)
-                }
+                _ => ActionData::Animation(AnimeGif::from_diagonal_png(
+                    file,
+                    anime_type,
+                    *time,
+                    *brightness,
+                )?),
             },
             ActionLoader::ImageAnimation {
                 file,
@@ -94,23 +104,25 @@ impl ActionData {
             } => {
                 if let Some(ext) = file.extension() {
                     if ext.to_string_lossy().to_lowercase() == "png" {
-                        return Ok(ActionData::Animation(AnimeGif::create_png_static(
+                        return Ok(ActionData::Animation(AnimeGif::from_png(
                             file,
                             *scale,
                             *angle,
                             *translation,
                             *time,
                             *brightness,
+                            anime_type,
                         )?));
                     }
                 }
-                ActionData::Animation(AnimeGif::create_png_gif(
+                ActionData::Animation(AnimeGif::from_gif(
                     file,
                     *scale,
                     *angle,
                     *translation,
                     *time,
                     *brightness,
+                    anime_type,
                 )?)
             }
             ActionLoader::Image {
@@ -124,18 +136,25 @@ impl ActionData {
                 match time {
                     AnimTime::Infinite => {
                         // If no time then create a plain static image
-                        let image =
-                            AnimeImage::from_png(file, *scale, *angle, *translation, *brightness)?;
-                        let data = <AnimeDataBuffer>::from(&image);
+                        let image = AnimeImage::from_png(
+                            file,
+                            *scale,
+                            *angle,
+                            *translation,
+                            *brightness,
+                            anime_type,
+                        )?;
+                        let data = <AnimeDataBuffer>::try_from(&image)?;
                         ActionData::Image(Box::new(data))
                     }
-                    _ => ActionData::Animation(AnimeGif::create_png_static(
+                    _ => ActionData::Animation(AnimeGif::from_png(
                         file,
                         *scale,
                         *angle,
                         *translation,
                         *time,
                         *brightness,
+                        anime_type,
                     )?),
                 }
             }
@@ -146,20 +165,21 @@ impl ActionData {
 }
 
 /// An optimised precomputed set of actions that the user can cycle through
-#[derive(Debug, Deserialize, Serialize, Default)]
-pub struct Sequences(Vec<ActionData>);
+#[derive(Debug, Deserialize, Serialize)]
+pub struct Sequences(Vec<ActionData>, AnimeType);
 
 impl Sequences {
     #[inline]
-    pub fn new() -> Self {
-        Self(Vec::new())
+    pub fn new(anime_type: AnimeType) -> Self {
+        Self(Vec::new(), anime_type)
     }
 
     /// Use a base `AnimeAction` to generate the precomputed data and insert in to
     /// the run buffer
     #[inline]
-    pub fn insert(&mut self, index: usize, action: &ActionLoader) -> Result<(), AnimeError> {
-        self.0.insert(index, ActionData::from_anime_action(action)?);
+    pub fn insert(&mut self, index: usize, action: &ActionLoader) -> Result<()> {
+        self.0
+            .insert(index, ActionData::from_anime_action(self.1, action)?);
         Ok(())
     }
 

rog-anime/src/usb.rs

@@ -7,6 +7,8 @@
 //!
 //! Step 1 need to applied only on fresh system boot.
 
+use crate::{error::AnimeError, AnimeType};
+
 const INIT_STR: [u8; 15] = [
     0x5e, b'A', b'S', b'U', b'S', b' ', b'T', b'e', b'c', b'h', b'.', b'I', b'n', b'c', b'.',
 ];
@@ -15,6 +17,49 @@ const DEV_PAGE: u8 = 0x5e;
 pub const VENDOR_ID: u16 = 0x0b05;
 pub const PROD_ID: u16 = 0x193b;
 
+/// `get_anime_type` is very broad, matching on part of the laptop board name only. For this
+/// reason `find_node()` must be used also to verify if the USB device is available.
+///
+/// The currently known USB device is `19b6`.
+#[inline]
+pub fn get_anime_type() -> Result<AnimeType, AnimeError> {
+    let dmi = sysfs_class::DmiId::default();
+    let board_name = dmi.board_name()?;
+
+    if board_name.contains("GA401I") {
+        return Ok(AnimeType::GA401);
+    } else if board_name.contains("GA401Q") {
+        return Ok(AnimeType::GA401);
+    } else if board_name.contains("GA402R") {
+        return Ok(AnimeType::GA402);
+    }
+    Err(AnimeError::UnsupportedDevice)
+}
+
+/// Find the USB device node - known devices so far: `19b6`
+#[inline]
+pub fn find_node(id_product: &str) -> Result<String, AnimeError> {
+    let mut enumerator =
+        udev::Enumerator::new().map_err(|err| AnimeError::Udev("enumerator failed".into(), err))?;
+    enumerator
+        .match_subsystem("usb")
+        .map_err(|err| AnimeError::Udev("match_subsystem failed".into(), err))?;
+
+    for device in enumerator
+        .scan_devices()
+        .map_err(|err| AnimeError::Udev("scan_devices failed".into(), err))?
+    {
+        if let Some(attr) = device.attribute_value("idProduct") {
+            if attr == id_product {
+                if let Some(dev_node) = device.devnode() {
+                    return Ok(dev_node.to_string_lossy().to_string());
+                }
+            }
+        }
+    }
+    Err(AnimeError::NoDevice)
+}
+
 /// Get the two device initialization packets. These are required for device start
 /// after the laptop boots.
 #[inline]

rog-aura/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "rog_aura"
-version = "1.1.0"
+version = "1.2.0"
 license = "MPL-2.0"
 readme = "README.md"
 authors = ["Luke <luke@ljones.dev>"]
@@ -14,11 +14,10 @@ exclude = ["data"]
 
 [features]
 default = ["dbus"]
-dbus = ["zvariant", "zvariant_derive"]
+dbus = ["zvariant"]
 
 [dependencies]
 serde = "^1.0"
 serde_derive = "^1.0"
 
-zvariant = { version = "^2.6", optional = true }
-zvariant_derive = { version = "^2.6", optional = true }
+zvariant = { version = "^3.0", optional = true }

rog-aura/src/builtin_modes.rs

@@ -7,17 +7,10 @@ pub const LED_INIT5: [u8; 6] = [0x5e, 0x05, 0x20, 0x31, 0, 0x08];
 use serde_derive::{Deserialize, Serialize};
 use std::str::FromStr;
 #[cfg(feature = "dbus")]
-use zvariant_derive::Type;
+use zvariant::Type;
 
 use crate::{error::Error, LED_MSG_LEN};
 
-#[cfg_attr(feature = "dbus", derive(Type))]
-#[derive(Debug, PartialEq, Copy, Clone, Deserialize, Serialize)]
-pub struct LedPowerStates {
-    pub enabled: bool,
-    pub sleep_anim_enabled: bool,
-}
-
 #[cfg_attr(feature = "dbus", derive(Type))]
 #[derive(Debug, Copy, Clone, PartialEq, Deserialize, Serialize)]
 pub enum LedBrightness {
@@ -145,18 +138,38 @@ pub enum AuraModeNum {
     Flash = 12,
 }
 
+impl From<AuraModeNum> for String {
+    fn from(mode: AuraModeNum) -> Self {
+        match mode {
+            AuraModeNum::Static => "Static",
+            AuraModeNum::Breathe => "Breathe",
+            AuraModeNum::Strobe => "Strobe",
+            AuraModeNum::Rainbow => "Rainbow",
+            AuraModeNum::Star => "Stars",
+            AuraModeNum::Rain => "Rain",
+            AuraModeNum::Highlight => "Highlight",
+            AuraModeNum::Laser => "Laser",
+            AuraModeNum::Ripple => "Ripple",
+            AuraModeNum::Pulse => "Pulse",
+            AuraModeNum::Comet => "Comet",
+            AuraModeNum::Flash => "Flash",
+        }
+        .to_string()
+    }
+}
+
 impl From<&AuraModeNum> for &str {
     fn from(mode: &AuraModeNum) -> Self {
         match mode {
             AuraModeNum::Static => "Static",
-            AuraModeNum::Breathe => "Breathing",
-            AuraModeNum::Strobe => "Strobing",
+            AuraModeNum::Breathe => "Breathe",
+            AuraModeNum::Strobe => "Strobe",
             AuraModeNum::Rainbow => "Rainbow",
             AuraModeNum::Star => "Stars",
             AuraModeNum::Rain => "Rain",
-            AuraModeNum::Highlight => "Keypress Highlight",
-            AuraModeNum::Laser => "Keypress Laser",
-            AuraModeNum::Ripple => "Keypress Ripple",
+            AuraModeNum::Highlight => "Highlight",
+            AuraModeNum::Laser => "Laser",
+            AuraModeNum::Ripple => "Ripple",
             AuraModeNum::Pulse => "Pulse",
             AuraModeNum::Comet => "Comet",
             AuraModeNum::Flash => "Flash",
@@ -167,14 +180,14 @@ impl From<&str> for AuraModeNum {
     fn from(mode: &str) -> Self {
         match mode {
             "Static" => AuraModeNum::Static,
-            "Breathing" => AuraModeNum::Breathe,
-            "Strobing" => AuraModeNum::Strobe,
+            "Breathe" => AuraModeNum::Breathe,
+            "Strobe" => AuraModeNum::Strobe,
             "Rainbow" => AuraModeNum::Rainbow,
             "Stars" => AuraModeNum::Star,
             "Rain" => AuraModeNum::Rain,
-            "Keypress Highlight" => AuraModeNum::Highlight,
-            "Keypress Laser" => AuraModeNum::Laser,
-            "Keypress Ripple" => AuraModeNum::Ripple,
+            "Highlight" => AuraModeNum::Highlight,
+            "Laser" => AuraModeNum::Laser,
+            "Ripple" => AuraModeNum::Ripple,
             "Pulse" => AuraModeNum::Pulse,
             "Comet" => AuraModeNum::Comet,
             "Flash" => AuraModeNum::Flash,
@@ -207,16 +220,60 @@ impl From<u8> for AuraModeNum {
 #[cfg_attr(feature = "dbus", derive(Type))]
 #[derive(Debug, Copy, Clone, PartialEq, Deserialize, Serialize)]
 pub enum AuraZone {
+    /// Used if keyboard has no zones, or if setting all
     None,
-    One,
-    Two,
-    Three,
-    Four,
+    /// Leftmost zone
+    Key1,
+    /// Zone after leftmost
+    Key2,
+    /// Zone second from right
+    Key3,
+    /// Rightmost zone
+    Key4,
+    /// Logo on the lid (or elsewhere?)
+    Logo,
+    /// The left part of a lightbar (typically on the front of laptop)
+    BarLeft,
+    /// The right part of a lightbar
+    BarRight,
+}
+
+impl Default for AuraZone {
+    fn default() -> Self {
+        AuraZone::None
+    }
+}
+
+impl FromStr for AuraZone {
+    type Err = Error;
+
+    fn from_str(s: &str) -> Result<Self, Self::Err> {
+        let s = s.to_lowercase();
+        match s.to_ascii_lowercase().as_str() {
+            "0" => Ok(AuraZone::None),
+            "none" => Ok(AuraZone::None),
+            "1" => Ok(AuraZone::Key1),
+            "one" => Ok(AuraZone::Key1),
+            "2" => Ok(AuraZone::Key2),
+            "two" => Ok(AuraZone::Key2),
+            "3" => Ok(AuraZone::Key3),
+            "three" => Ok(AuraZone::Key3),
+            "4" => Ok(AuraZone::Key4),
+            "four" => Ok(AuraZone::Key4),
+            "5" => Ok(AuraZone::Logo),
+            "logo" => Ok(AuraZone::Logo),
+            "6" => Ok(AuraZone::BarLeft),
+            "lightbar-left" => Ok(AuraZone::BarLeft),
+            "7" => Ok(AuraZone::BarRight),
+            "lightbar-right" => Ok(AuraZone::BarRight),
+            _ => Err(Error::ParseSpeed),
+        }
+    }
 }
 
 /// Default factory modes structure. This easily converts to an USB HID packet with:
 /// ```rust
-/// let bytes: [u8; LED_MSG_LEN] = mode.into();
+/// // let bytes: [u8; LED_MSG_LEN] = mode.into();
 /// ```
 #[cfg_attr(feature = "dbus", derive(Type))]
 #[derive(Debug, Clone, Deserialize, Serialize)]
@@ -299,3 +356,100 @@ impl From<&AuraEffect> for [u8; LED_MSG_LEN] {
         msg
     }
 }
+
+#[cfg(test)]
+mod tests {
+    use crate::{AuraEffect, AuraModeNum, AuraZone, Colour, Direction, Speed, LED_MSG_LEN};
+
+    #[test]
+    fn check_led_static_packet() {
+        let st = AuraEffect {
+            mode: AuraModeNum::Static,
+            zone: AuraZone::None,
+            colour1: Colour(0xff, 0x11, 0xdd),
+            colour2: Colour::default(),
+            speed: Speed::Med,
+            direction: Direction::Right,
+        };
+        let ar = <[u8; LED_MSG_LEN]>::from(&st);
+
+        println!("{:02x?}", ar);
+        let check = [
+            0x5d, 0xb3, 0x0, 0x0, 0xff, 0x11, 0xdd, 0xeb, 0x0, 0x0, 0xa6, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0,
+        ];
+        assert_eq!(ar, check);
+    }
+
+    #[test]
+    fn check_led_static_zone_packet() {
+        let mut st = AuraEffect {
+            mode: AuraModeNum::Static,
+            zone: AuraZone::Key1,
+            colour1: Colour(0xff, 0, 0),
+            colour2: Colour(0, 0, 0),
+            speed: Speed::Low,
+            direction: Direction::Left,
+        };
+        let capture = [
+            0x5d, 0xb3, 0x01, 0x00, 0xff, 0x00, 0x00, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0,
+        ];
+        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+
+        st.zone = AuraZone::Key2;
+        st.colour1 = Colour(0xff, 0xff, 0);
+        let capture = [
+            0x5d, 0xb3, 0x02, 0x00, 0xff, 0xff, 0x00, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0,
+        ];
+        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+
+        st.zone = AuraZone::Key3;
+        st.colour1 = Colour(0, 0xff, 0xff);
+        let capture = [
+            0x5d, 0xb3, 0x03, 0x00, 0x00, 0xff, 0xff, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0,
+        ];
+        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+
+        st.zone = AuraZone::Key4;
+        st.colour1 = Colour(0xff, 0x00, 0xff);
+        let capture = [
+            0x5d, 0xb3, 0x04, 0x00, 0xff, 0x00, 0xff, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0,
+        ];
+        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+
+        st.zone = AuraZone::Logo;
+        st.colour1 = Colour(0x2c, 0xff, 0x00);
+        let capture = [
+            0x5d, 0xb3, 0x05, 0x00, 0x2c, 0xff, 0x00, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0,
+        ];
+        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+
+        st.zone = AuraZone::BarLeft;
+        st.colour1 = Colour(0xff, 0x00, 0x00);
+        let capture = [
+            0x5d, 0xb3, 0x06, 0x00, 0xff, 0x00, 0x00, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0,
+        ];
+        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+
+        st.zone = AuraZone::BarRight;
+        st.colour1 = Colour(0xff, 0x00, 0xcd);
+        let capture = [
+            0x5d, 0xb3, 0x07, 0x00, 0xff, 0x00, 0xcd, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0,
+        ];
+        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+
+        st.mode = AuraModeNum::Rainbow;
+        let capture = [
+            0x5d, 0xb3, 0x07, 0x03, 0xff, 0x00, 0xcd, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+            0x0, 0x0,
+        ];
+        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+    }
+}

rog-aura/src/lib.rs

@@ -16,3 +16,12 @@ pub mod error;
 pub const LED_MSG_LEN: usize = 17;
 
 pub static VERSION: &str = env!("CARGO_PKG_VERSION");
+
+pub const RED: Colour = Colour(0xff, 0x00, 0x00);
+pub const GREEN: Colour = Colour(0x00, 0xff, 0x00);
+pub const BLUE: Colour = Colour(0x00, 0x00, 0xff);
+pub const VIOLET: Colour = Colour(0x9B, 0x26, 0xB6);
+pub const TEAL: Colour = Colour(0x00, 0x7C, 0x80);
+pub const YELLOW: Colour = Colour(0xff, 0xef, 0x00);
+pub const ORANGE: Colour = Colour(0xff, 0xa4, 0x00);
+pub const GRADIENT: [Colour; 7] = [RED, VIOLET, BLUE, TEAL, GREEN, YELLOW, ORANGE];

rog-aura/src/usb.rs

@@ -1,3 +1,8 @@
+use serde::{Deserialize, Serialize};
+use std::ops::{BitAnd, BitOr};
+#[cfg(feature = "dbus")]
+use zvariant::Type;
+
 pub const LED_INIT1: [u8; 2] = [0x5d, 0xb9];
 pub const LED_INIT2: &str = "]ASUS Tech.Inc."; // ] == 0x5d
 pub const LED_INIT3: [u8; 6] = [0x5d, 0x05, 0x20, 0x31, 0, 0x08];
@@ -15,18 +20,293 @@ pub const fn aura_brightness_bytes(brightness: u8) -> [u8; 17] {
     ]
 }
 
-pub const LED_AWAKE_ON_SLEEP_OFF: [u8; 17] = [
-    0x5d, 0xbd, 0x01, 0xcf, 0x17, 0x0b, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-];
+/// This struct is intended as a helper to pass args to generic dbus interface
+#[cfg_attr(feature = "dbus", derive(Type))]
+#[derive(Clone, Debug, Serialize, Deserialize)]
+pub struct AuraPowerDev {
+    pub x1866: Vec<AuraDev1866>,
+    pub x19b6: Vec<AuraDev19b6>,
+}
 
-pub const LED_AWAKE_ON_SLEEP_ON: [u8; 17] = [
-    0x5d, 0xbd, 0x01, 0xff, 0x1f, 0x0f, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-];
+/// # Bits for older 0x1866 keyboard model
+///
+/// Keybord and Lightbar require Awake, Boot and Sleep apply to both
+/// Keybord and Lightbar regardless of if either are enabled (or Awake is enabled)
+///
+/// |   Byte 1   |   Byte 2   |   Byte 3   | function |   hex    |
+/// |------------|------------|------------|----------|----------|
+/// | 0000, 0000 | 0000, 0000 | 0000, 0010 | Awake    | 00,00,02 |
+/// | 0000, 1000 | 0000, 0000 | 0000, 0000 | Keyboard | 08,00,00 |
+/// | 0000, 0100 | 0000, 0101 | 0000, 0000 | Lightbar | 04,05,00 |
+/// | 1100, 0011 | 0001, 0010 | 0000, 1001 | Boot/Sht | c3,12,09 |
+/// | 0011, 0000 | 0000, 1000 | 0000, 0100 | Sleep    | 30,08,04 |
+/// | 1111, 1111 | 0001, 1111 | 0000, 1111 | all on   |          |
+///
+#[cfg_attr(feature = "dbus", derive(Type))]
+#[derive(Clone, Copy, Debug, PartialEq, PartialOrd, Eq, Ord, Hash, Serialize, Deserialize)]
+#[repr(u32)]
+pub enum AuraDev1866 {
+    Awake = 0x000002,
+    Keyboard = 0x080000,
+    Lightbar = 0x040500,
+    Boot = 0xc31209,
+    Sleep = 0x300804,
+}
 
-pub const LED_AWAKE_OFF_SLEEP_OFF: [u8; 17] = [
-    0x5d, 0xbd, 0x01, 0xc3, 0x13, 0x09, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-];
+impl From<AuraDev1866> for u32 {
+    fn from(a: AuraDev1866) -> Self {
+        a as u32
+    }
+}
 
-pub const LED_AWAKE_OFF_SLEEP_ON: [u8; 17] = [
-    0x5d, 0xbd, 0x01, 0xf3, 0x1b, 0x0d, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-];
+impl AuraDev1866 {
+    pub fn to_bytes(control: &[Self]) -> [u8; 3] {
+        let mut a: u32 = 0;
+        control.iter().for_each(|n| {
+            a |= *n as u32;
+        });
+        [
+            ((a & 0xff0000) >> 16) as u8,
+            ((a & 0xff00) >> 8) as u8,
+            (a & 0xff) as u8,
+        ]
+    }
+
+    pub const fn dev_id() -> &'static str {
+        "0x1866"
+    }
+}
+
+impl BitOr<AuraDev1866> for AuraDev1866 {
+    type Output = u32;
+
+    fn bitor(self, rhs: AuraDev1866) -> Self::Output {
+        return self as u32 | rhs as u32;
+    }
+}
+
+impl BitAnd<AuraDev1866> for AuraDev1866 {
+    type Output = u32;
+
+    fn bitand(self, rhs: AuraDev1866) -> Self::Output {
+        return self as u32 & rhs as u32;
+    }
+}
+
+/// # Bits for 0x19b6 keyboard model
+///
+/// byte 4 in the USB packet is for keyboard + logo power states
+/// default is on, `ff`
+/// Keyboard and logo use the full range of bits (almost)
+///
+/// | n1   | n2   | hex | action                | bit   |
+/// |------|------|-----|-----------------------|-------|
+/// | 0000 | 0000 | 00  | all off               |       |
+/// | 0000 | 0001 | 01  | logo boot             | bit 1 |
+/// | 0000 | 0010 | 02  | keyboard boot         | bit 2 |
+/// | 0000 | 0100 | 04  | logo awake            | bit 3 |
+/// | 0000 | 1000 | 08  | keyboard awake        | bit 4 |
+/// | 0001 | 0000 | 10  | logo sleep off        | bit 5 |
+/// | 0010 | 0000 | 20  | keyboard sleep        | bit 6 |
+/// | 0100 | 0000 | 40  | logo shutdown off     | bit 7 |
+/// | 1000 | 0000 | 80  | keyboard shutdown off | bit 8 |
+///
+/// byte 5 = lightbar
+///
+/// |  1   |  2   | hex | action               | bit   |
+/// |------|------|-----|----------------------|-------|
+/// | 0000 | 0010 | 02  | lightbar off boot    | bit 2 |
+/// | 0000 | 0100 | 04  | lightbar on          | bit 3 |
+/// | 0000 | 1000 | 08  | lightbar off sleep   | bit 4 |
+/// | 0001 | 0000 | 10  | lightbar shtdn off   | bit 5 |
+///
+#[cfg_attr(feature = "dbus", derive(Type))]
+#[derive(Clone, Copy, Debug, PartialEq, PartialOrd, Eq, Ord, Hash, Serialize, Deserialize)]
+#[repr(u16)]
+pub enum AuraDev19b6 {
+    BootLogo = 1,
+    BootKeyb = 1 << 1,
+    AwakeLogo = 1 << 2,
+    AwakeKeyb = 1 << 3,
+    SleepLogo = 1 << 4,
+    SleepKeyb = 1 << 5,
+    ShutdownLogo = 1 << 6,
+    ShutdownKeyb = 1 << 7,
+    AwakeBar = 1 << 7 + 2,
+    BootBar = 1 << 7 + 3,
+    SleepBar = 1 << 7 + 4,
+    ShutdownBar = 1 << 7 + 5,
+}
+
+impl From<AuraDev19b6> for u16 {
+    fn from(a: AuraDev19b6) -> Self {
+        a as u16
+    }
+}
+
+impl AuraDev19b6 {
+    pub fn to_bytes(control: &[Self]) -> [u8; 3] {
+        let mut a: u16 = 0;
+        control.iter().for_each(|n| {
+            a |= *n as u16;
+        });
+        [(a & 0xff) as u8, ((a & 0xff00) >> 8) as u8, 0x00]
+    }
+
+    pub const fn dev_id() -> &'static str {
+        "0x196b"
+    }
+}
+
+impl BitOr<AuraDev19b6> for AuraDev19b6 {
+    type Output = u16;
+
+    fn bitor(self, rhs: AuraDev19b6) -> Self::Output {
+        return self as u16 | rhs as u16;
+    }
+}
+
+impl BitAnd<AuraDev19b6> for AuraDev19b6 {
+    type Output = u16;
+
+    fn bitand(self, rhs: AuraDev19b6) -> Self::Output {
+        return self as u16 & rhs as u16;
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use crate::usb::AuraDev19b6;
+
+    use super::AuraDev1866;
+
+    #[test]
+    fn check_0x1866_control_bytes() {
+        let bytes = [AuraDev1866::Keyboard, AuraDev1866::Awake];
+        let bytes = AuraDev1866::to_bytes(&bytes);
+        println!("{:08b}, {:08b}, {:08b}", bytes[0], bytes[1], bytes[2]);
+        assert_eq!(bytes, [0x08, 0x00, 0x02]);
+
+        let bytes = [AuraDev1866::Lightbar, AuraDev1866::Awake];
+        let bytes = AuraDev1866::to_bytes(&bytes);
+        println!("{:08b}, {:08b}, {:08b}", bytes[0], bytes[1], bytes[2]);
+        assert_eq!(bytes, [0x04, 0x05, 0x02]);
+
+        let bytes = [AuraDev1866::Sleep];
+        let bytes = AuraDev1866::to_bytes(&bytes);
+        println!("{:08b}, {:08b}, {:08b}", bytes[0], bytes[1], bytes[2]);
+        assert_eq!(bytes, [0x30, 0x08, 0x04]);
+
+        let bytes = [AuraDev1866::Boot];
+        let bytes = AuraDev1866::to_bytes(&bytes);
+        println!("{:08b}, {:08b}, {:08b}", bytes[0], bytes[1], bytes[2]);
+        assert_eq!(bytes, [0xc3, 0x12, 0x09]);
+
+        let bytes = [
+            AuraDev1866::Keyboard,
+            AuraDev1866::Lightbar,
+            AuraDev1866::Awake,
+            AuraDev1866::Sleep,
+            AuraDev1866::Boot,
+        ];
+
+        let bytes = AuraDev1866::to_bytes(&bytes);
+        println!("{:08b}, {:08b}, {:08b}", bytes[0], bytes[1], bytes[2]);
+        assert_eq!(bytes, [0xff, 0x1f, 0x000f]);
+    }
+
+    #[test]
+    fn check_0x19b6_control_bytes() {
+        // All on
+        let byte1 = [
+            AuraDev19b6::BootLogo,
+            AuraDev19b6::BootKeyb,
+            AuraDev19b6::SleepLogo,
+            AuraDev19b6::SleepKeyb,
+            AuraDev19b6::AwakeLogo,
+            AuraDev19b6::AwakeKeyb,
+            AuraDev19b6::ShutdownLogo,
+            AuraDev19b6::ShutdownKeyb,
+        ];
+        let bytes = AuraDev19b6::to_bytes(&byte1);
+        println!("{:08b}", bytes[0]);
+        assert_eq!(bytes[0], 0xff);
+
+        //
+        let byte1 = [
+            // AuraControl::BootLogo,
+            AuraDev19b6::BootKeyb,
+            AuraDev19b6::SleepLogo,
+            AuraDev19b6::SleepKeyb,
+            AuraDev19b6::AwakeLogo,
+            AuraDev19b6::AwakeKeyb,
+            AuraDev19b6::ShutdownLogo,
+            AuraDev19b6::ShutdownKeyb,
+        ];
+        let bytes = AuraDev19b6::to_bytes(&byte1);
+        println!("{:08b}", bytes[0]);
+        assert_eq!(bytes[0], 0xfe);
+
+        let byte1 = [
+            AuraDev19b6::BootLogo,
+            // AuraControl::BootKeyb,
+            AuraDev19b6::SleepLogo,
+            AuraDev19b6::SleepKeyb,
+            AuraDev19b6::AwakeLogo,
+            AuraDev19b6::AwakeKeyb,
+            AuraDev19b6::ShutdownLogo,
+            AuraDev19b6::ShutdownKeyb,
+        ];
+        let bytes = AuraDev19b6::to_bytes(&byte1);
+        println!("{:08b}", bytes[0]);
+        assert_eq!(bytes[0], 0xfd);
+
+        let byte1 = [
+            AuraDev19b6::BootLogo,
+            AuraDev19b6::BootKeyb,
+            // AuraControl::SleepLogo,
+            AuraDev19b6::SleepKeyb,
+            AuraDev19b6::AwakeLogo,
+            AuraDev19b6::AwakeKeyb,
+            AuraDev19b6::ShutdownLogo,
+            AuraDev19b6::ShutdownKeyb,
+        ];
+        let bytes = AuraDev19b6::to_bytes(&byte1);
+        println!("{:08b}", bytes[0]);
+        assert_eq!(bytes[0], 0xef);
+
+        let byte1 = [
+            AuraDev19b6::BootLogo,
+            AuraDev19b6::BootKeyb,
+            AuraDev19b6::SleepLogo,
+            // AuraControl::SleepKeyb,
+            AuraDev19b6::AwakeLogo,
+            AuraDev19b6::AwakeKeyb,
+            AuraDev19b6::ShutdownLogo,
+            AuraDev19b6::ShutdownKeyb,
+        ];
+        let bytes = AuraDev19b6::to_bytes(&byte1);
+        println!("{:08b}", bytes[0]);
+        assert_eq!(bytes[0], 0xdf);
+
+        let byte2 = [
+            AuraDev19b6::AwakeBar,
+            AuraDev19b6::BootBar,
+            AuraDev19b6::SleepBar,
+            AuraDev19b6::ShutdownBar,
+        ];
+        let bytes = AuraDev19b6::to_bytes(&byte2);
+        println!("{:08b}", bytes[1]);
+        assert_eq!(bytes[1], 0x1e);
+
+        let byte2 = [
+            AuraDev19b6::AwakeBar,
+            AuraDev19b6::BootBar,
+            // AuraControl::SleepBar,
+            AuraDev19b6::ShutdownBar,
+        ];
+        let bytes = AuraDev19b6::to_bytes(&byte2);
+        println!("{:08b}", bytes[1]);
+        assert_eq!(bytes[1], 0x16);
+    }
+}

rog-dbus/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "rog_dbus"
-version = "4.0.0"
+version = "4.2.0"
 license = "MPL-2.0"
 readme = "README.md"
 authors = ["Luke <luke@ljones.dev>"]
@@ -14,7 +14,6 @@ rog_anime = { path = "../rog-anime" }
 rog_aura = { path = "../rog-aura" }
 rog_profiles = { path = "../rog-profiles" }
 rog_supported = { path = "../rog-supported" }
-supergfxctl = { git = "https://gitlab.com/asus-linux/supergfxctl.git", tag = "2.0.0" }
-zbus = "^1.9"
-zbus_macros = "^1.9"
-zvariant = "^2.8"
+zbus = "^2.2"
+zbus_macros = "^2.0"
+zvariant = "^3.0"

rog-dbus/src/lib.rs

@@ -1,5 +1,4 @@
 pub static DBUS_NAME: &str = "org.asuslinux.Daemon";
-pub static DBUS_NAME_GFX: &str = "org.supergfxctl.Daemon";
 pub static DBUS_PATH: &str = "/org/asuslinux/Daemon";
 pub static DBUS_IFACE: &str = "org.asuslinux.Daemon";
 
@@ -10,51 +9,109 @@ pub mod zbus_profile;
 pub mod zbus_rogbios;
 pub mod zbus_supported;
 
-use rog_anime::AnimePowerStates;
-use rog_aura::{AuraEffect, LedPowerStates};
-use rog_profiles::Profile;
-use std::sync::mpsc::{channel, Receiver};
-use zbus::{Connection, Result, SignalReceiver};
+// use rog_anime::AnimePowerStates;
+// use rog_aura::{AuraEffect, LedPowerStates};
+// use rog_profiles::Profile;
+// use std::sync::mpsc::{channel, Receiver};
+use zbus::{blocking, Connection, Result};
 
 pub static VERSION: &str = env!("CARGO_PKG_VERSION");
+pub struct DbusProxiesBlocking<'a> {
+    anime: zbus_anime::AnimeProxyBlocking<'a>,
+    charge: zbus_charge::ChargeProxyBlocking<'a>,
+    led: zbus_led::LedProxyBlocking<'a>,
+    profile: zbus_profile::ProfileProxyBlocking<'a>,
+    rog_bios: zbus_rogbios::RogBiosProxyBlocking<'a>,
+    supported: zbus_supported::SupportedProxyBlocking<'a>,
+}
+
+impl<'a> DbusProxiesBlocking<'a> {
+    #[inline]
+    pub fn new() -> Result<(Self, blocking::Connection)> {
+        let conn = blocking::Connection::system()?;
+
+        Ok((
+            DbusProxiesBlocking {
+                anime: zbus_anime::AnimeProxyBlocking::new(&conn)?,
+                led: zbus_led::LedProxyBlocking::new(&conn)?,
+                charge: zbus_charge::ChargeProxyBlocking::new(&conn)?,
+                profile: zbus_profile::ProfileProxyBlocking::new(&conn)?,
+                rog_bios: zbus_rogbios::RogBiosProxyBlocking::new(&conn)?,
+                supported: zbus_supported::SupportedProxyBlocking::new(&conn)?,
+            },
+            conn,
+        ))
+    }
+
+    pub fn anime(&self) -> &zbus_anime::AnimeProxyBlocking<'a> {
+        &self.anime
+    }
+
+    pub fn charge(&self) -> &zbus_charge::ChargeProxyBlocking<'a> {
+        &self.charge
+    }
+
+    pub fn led(&self) -> &zbus_led::LedProxyBlocking<'a> {
+        &self.led
+    }
+
+    pub fn profile(&self) -> &zbus_profile::ProfileProxyBlocking<'a> {
+        &self.profile
+    }
+
+    pub fn rog_bios(&self) -> &zbus_rogbios::RogBiosProxyBlocking<'a> {
+        &self.rog_bios
+    }
+
+    pub fn supported(&self) -> &zbus_supported::SupportedProxyBlocking<'a> {
+        &self.supported
+    }
+}
+
+/// This is the main way to communicate with the DBUS interface
+pub struct RogDbusClientBlocking<'a> {
+    proxies: DbusProxiesBlocking<'a>,
+}
+
+impl<'a> RogDbusClientBlocking<'a> {
+    #[inline]
+    pub fn new() -> Result<(Self, blocking::Connection)> {
+        let (proxies, conn) = DbusProxiesBlocking::new()?;
+        Ok((RogDbusClientBlocking { proxies }, conn))
+    }
+
+    pub fn proxies(&self) -> &DbusProxiesBlocking {
+        &self.proxies
+    }
+}
+
 pub struct DbusProxies<'a> {
     anime: zbus_anime::AnimeProxy<'a>,
     charge: zbus_charge::ChargeProxy<'a>,
     led: zbus_led::LedProxy<'a>,
     profile: zbus_profile::ProfileProxy<'a>,
     rog_bios: zbus_rogbios::RogBiosProxy<'a>,
-    supported: zbus_supported::SupportProxy<'a>,
+    supported: zbus_supported::SupportedProxy<'a>,
 }
 
 impl<'a> DbusProxies<'a> {
     #[inline]
-    pub fn new() -> Result<(Self, Connection)> {
-        let conn = Connection::new_system()?;
+    pub async fn new() -> Result<(DbusProxies<'a>, Connection)> {
+        let conn = Connection::system().await?;
 
         Ok((
             DbusProxies {
-                anime: zbus_anime::AnimeProxy::new(&conn)?,
-                led: zbus_led::LedProxy::new(&conn)?,
-                charge: zbus_charge::ChargeProxy::new(&conn)?,
-                profile: zbus_profile::ProfileProxy::new(&conn)?,
-                rog_bios: zbus_rogbios::RogBiosProxy::new(&conn)?,
-                supported: zbus_supported::SupportProxy::new(&conn)?,
+                anime: zbus_anime::AnimeProxy::new(&conn).await?,
+                led: zbus_led::LedProxy::new(&conn).await?,
+                charge: zbus_charge::ChargeProxy::new(&conn).await?,
+                profile: zbus_profile::ProfileProxy::new(&conn).await?,
+                rog_bios: zbus_rogbios::RogBiosProxy::new(&conn).await?,
+                supported: zbus_supported::SupportedProxy::new(&conn).await?,
             },
             conn,
         ))
     }
 
-    pub fn setup_recv(&'a self, conn: Connection) -> SignalReceiver<'a, 'a> {
-        let mut recv = SignalReceiver::new(conn);
-        recv.receive_for(self.anime.proxy());
-        recv.receive_for(self.led.proxy());
-        recv.receive_for(self.charge.proxy());
-        recv.receive_for(self.profile.proxy());
-        recv.receive_for(self.rog_bios.proxy());
-        recv.receive_for(self.supported.proxy());
-        recv
-    }
-
     pub fn anime(&self) -> &zbus_anime::AnimeProxy<'a> {
         &self.anime
     }
@@ -75,96 +132,24 @@ impl<'a> DbusProxies<'a> {
         &self.rog_bios
     }
 
-    pub fn supported(&self) -> &zbus_supported::SupportProxy<'a> {
+    pub fn supported(&self) -> &zbus_supported::SupportedProxy<'a> {
         &self.supported
     }
 }
 
-// Signals separated out
-pub struct Signals {
-    pub profile: Receiver<Profile>,
-    pub led_mode: Receiver<AuraEffect>,
-    pub led_power_state: Receiver<LedPowerStates>,
-    pub anime_power_state: Receiver<AnimePowerStates>,
-    pub charge: Receiver<u8>,
-    pub bios_gsync: Receiver<bool>,
-    pub bios_sound: Receiver<bool>,
-}
-
-impl Signals {
-    #[inline]
-    pub fn new(proxies: &DbusProxies) -> Result<Self> {
-        Ok(Signals {
-            profile: {
-                let (tx, rx) = channel();
-                proxies.profile.connect_notify_profile(tx)?;
-                rx
-            },
-            charge: {
-                let (tx, rx) = channel();
-                proxies.charge.connect_notify_charge(tx)?;
-                rx
-            },
-            led_mode: {
-                let (tx, rx) = channel();
-                proxies.led.connect_notify_led(tx)?;
-                rx
-            },
-            led_power_state: {
-                let (tx, rx) = channel();
-                proxies.led.connect_notify_power_states(tx)?;
-                rx
-            },
-            anime_power_state: {
-                let (tx, rx) = channel();
-                proxies.anime.connect_notify_power_states(tx)?;
-                rx
-            },
-            bios_gsync: {
-                let (tx, rx) = channel();
-                proxies.rog_bios.connect_notify_dedicated_graphic_mode(tx)?;
-                rx
-            },
-            bios_sound: {
-                let (tx, rx) = channel();
-                proxies.rog_bios.connect_notify_post_boot_sound(tx)?;
-                rx
-            },
-        })
-    }
-}
-
 /// This is the main way to communicate with the DBUS interface
 pub struct RogDbusClient<'a> {
     proxies: DbusProxies<'a>,
-    signals: Signals,
 }
 
 impl<'a> RogDbusClient<'a> {
     #[inline]
-    pub fn new() -> Result<(Self, Connection)> {
-        let (proxies, conn) = DbusProxies::new()?;
-        let signals = Signals::new(&proxies)?;
-
-        Ok((RogDbusClient { proxies, signals }, conn))
+    pub async fn new() -> Result<(RogDbusClient<'a>, Connection)> {
+        let (proxies, conn) = DbusProxies::new().await?;
+        Ok((RogDbusClient { proxies }, conn))
     }
 
     pub fn proxies(&self) -> &DbusProxies {
         &self.proxies
     }
-
-    pub fn signals(&self) -> &Signals {
-        &self.signals
-    }
-
-    pub fn setup_recv(&'a self, conn: Connection) -> SignalReceiver<'a, 'a> {
-        let mut recv = SignalReceiver::new(conn);
-        recv.receive_for(self.proxies.anime.proxy());
-        recv.receive_for(self.proxies.led.proxy());
-        recv.receive_for(self.proxies.charge.proxy());
-        recv.receive_for(self.proxies.profile.proxy());
-        recv.receive_for(self.proxies.rog_bios.proxy());
-        recv.receive_for(self.proxies.supported.proxy());
-        recv
-    }
 }

rog-dbus/src/zbus_anime.rs

@@ -1,12 +1,11 @@
 use rog_anime::{AnimeDataBuffer, AnimePowerStates};
-use std::sync::mpsc::Sender;
-use zbus::{dbus_proxy, Connection, Result};
+use zbus_macros::dbus_proxy;
 
 #[dbus_proxy(
     interface = "org.asuslinux.Daemon",
     default_path = "/org/asuslinux/Anime"
 )]
-trait Daemon {
+trait Anime {
     /// Set whether the AniMe will show boot, suspend, or off animations
     fn set_boot_on_off(&self, status: bool) -> zbus::Result<()>;
 
@@ -17,7 +16,7 @@ trait Daemon {
     fn set_on_off(&self, status: bool) -> zbus::Result<()>;
 
     /// Writes a data stream of length. Will force system thread to exit until it is restarted
-    fn write(&self, input: &[u8]) -> zbus::Result<()>;
+    fn write(&self, input: AnimeDataBuffer) -> zbus::Result<()>;
 
     /// Get status of if the AniMe LEDs are on
     #[dbus_proxy(property)]
@@ -29,61 +28,5 @@ trait Daemon {
 
     /// Notify listeners of the status of AniMe LED power and factory system-status animations
     #[dbus_proxy(signal)]
-    fn notify_power_states(&self, data: AnimePowerStates) -> zbus::Result<()>;
-}
-
-pub struct AnimeProxy<'a>(DaemonProxy<'a>);
-
-impl<'a> AnimeProxy<'a> {
-    #[inline]
-    pub fn new(conn: &Connection) -> Result<Self> {
-        Ok(AnimeProxy(DaemonProxy::new(conn)?))
-    }
-
-    #[inline]
-    pub fn proxy(&self) -> &DaemonProxy<'a> {
-        &self.0
-    }
-
-    /// Set whether the AniMe will show boot, suspend, or off animations
-    #[inline]
-    pub fn set_system_animations(&self, on: bool) -> Result<()> {
-        self.0.set_boot_on_off(on)
-    }
-
-    /// Set whether the AniMe is displaying images/data
-    #[inline]
-    pub fn set_led_power(&self, on: bool) -> Result<()> {
-        self.0.set_on_off(on)
-    }
-
-    /// Writes a data stream of length. Will force system thread to exit until it is restarted
-    #[inline]
-    pub fn write(&self, input: AnimeDataBuffer) -> Result<()> {
-        self.0.write(input.get())
-    }
-
-    /// Get status of if the AniMe LEDs are on
-    #[inline]
-    pub fn awake_enabled(&self) -> Result<bool> {
-        self.0.awake_enabled()
-    }
-
-    /// Get the status of if factory system-status animations are enabled
-    #[inline]
-    pub fn boot_enabled(&self) -> Result<bool> {
-        self.0.boot_enabled()
-    }
-
-    #[inline]
-    pub fn connect_notify_power_states(
-        &self,
-        send: Sender<AnimePowerStates>,
-    ) -> zbus::fdo::Result<()> {
-        self.0.connect_notify_power_states(move |data| {
-            send.send(data)
-                .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
-            Ok(())
-        })
-    }
+    fn power_states(&self, data: AnimePowerStates) -> zbus::Result<()>;
 }

rog-dbus/src/zbus_charge.rs

@@ -19,15 +19,13 @@
 //!
 //! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
 
-use std::sync::mpsc::Sender;
-
-use zbus::{dbus_proxy, Connection, Result};
+use zbus_macros::dbus_proxy;
 
 #[dbus_proxy(
     interface = "org.asuslinux.Daemon",
     default_path = "/org/asuslinux/Charge"
 )]
-trait Daemon {
+trait Charge {
     /// Limit method
     fn limit(&self) -> zbus::Result<i16>;
 
@@ -36,38 +34,5 @@ trait Daemon {
 
     /// NotifyCharge signal
     #[dbus_proxy(signal)]
-    fn notify_charge(&self, limit: u8) -> zbus::Result<()>;
-}
-
-pub struct ChargeProxy<'a>(DaemonProxy<'a>);
-
-impl<'a> ChargeProxy<'a> {
-    #[inline]
-    pub fn new(conn: &Connection) -> Result<Self> {
-        Ok(ChargeProxy(DaemonProxy::new(conn)?))
-    }
-
-    #[inline]
-    pub fn proxy(&self) -> &DaemonProxy<'a> {
-        &self.0
-    }
-
-    #[inline]
-    pub fn write_limit(&self, level: u8) -> Result<()> {
-        self.0.set_limit(level)
-    }
-
-    #[inline]
-    pub fn get_limit(&self) -> Result<i16> {
-        self.0.limit()
-    }
-
-    #[inline]
-    pub fn connect_notify_charge(&self, send: Sender<u8>) -> zbus::fdo::Result<()> {
-        self.0.connect_notify_charge(move |data| {
-            send.send(data)
-                .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
-            Ok(())
-        })
-    }
+    fn notify_charge(&self, limit: u8) -> zbus::Result<u8>;
 }

rog-dbus/src/zbus_led.rs

@@ -1,7 +1,7 @@
 //! # DBus interface proxy for: `org.asuslinux.Daemon`
 //!
 //! This code was generated by `zbus-xmlgen` `1.0.0` from DBus introspection data.
-//! Source: `Interface '/org/asuslinux/Led' from service 'org.asuslinux.Daemon' on system bus`.
+//! Source: `Interface '/org/asuslinux/Aura' from service 'org.asuslinux.Daemon' on system bus`.
 //!
 //! You may prefer to adapt it, instead of using it verbatim.
 //!
@@ -19,19 +19,18 @@
 //!
 //! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
 
-use std::sync::mpsc::Sender;
+use zbus::{blocking::Connection, Result};
+use zbus_macros::dbus_proxy;
 
-use zbus::{dbus_proxy, Connection, Result};
-
-use rog_aura::{AuraEffect, KeyColourArray, LedBrightness, LedPowerStates};
+use rog_aura::{usb::AuraPowerDev, AuraEffect, KeyColourArray, LedBrightness, AuraModeNum};
 
 const BLOCKING_TIME: u64 = 40; // 100ms = 10 FPS, max 50ms = 20 FPS, 40ms = 25 FPS
 
 #[dbus_proxy(
     interface = "org.asuslinux.Daemon",
-    default_path = "/org/asuslinux/Led"
+    default_path = "/org/asuslinux/Aura"
 )]
-trait Daemon {
+trait Led {
     /// NextLedMode method
     fn next_led_mode(&self) -> zbus::Result<()>;
 
@@ -50,111 +49,44 @@ trait Daemon {
     /// SetLedMode method
     fn set_led_mode(&self, effect: &AuraEffect) -> zbus::Result<()>;
 
-    /// SetAwakeEnabled method
-    fn set_awake_enabled(&self, enabled: bool) -> zbus::Result<()>;
-
-    /// SetSleepEnabled method
-    fn set_sleep_enabled(&self, enabled: bool) -> zbus::Result<()>;
+    fn set_leds_power(&self, options: AuraPowerDev, enabled: bool) -> zbus::Result<()>;
 
     /// NotifyLed signal
     #[dbus_proxy(signal)]
     fn notify_led(&self, data: AuraEffect) -> zbus::Result<()>;
 
     #[dbus_proxy(signal)]
-    fn notify_power_states(&self, data: LedPowerStates) -> zbus::Result<()>;
+    fn notify_power_states(&self, data: AuraPowerDev) -> zbus::Result<()>;
 
     /// LedBrightness property
     #[dbus_proxy(property)]
     fn led_brightness(&self) -> zbus::Result<i16>;
 
     /// LedMode property
-    #[dbus_proxy(property)]
-    fn led_mode(&self) -> zbus::Result<String>;
+    fn led_mode(&self) -> zbus::Result<AuraModeNum>;
 
     /// LedModes property
     #[dbus_proxy(property)]
     fn led_modes(&self) -> zbus::Result<String>;
 
-    #[dbus_proxy(property)]
-    fn awake_enabled(&self) -> zbus::Result<bool>;
-
-    #[dbus_proxy(property)]
-    fn sleep_enabled(&self) -> zbus::Result<bool>;
+    // As property doesn't work for AuraPowerDev (complexity of serialization?)
+    // #[dbus_proxy(property)]
+    fn leds_enabled(&self) -> zbus::Result<AuraPowerDev>;
 }
 
-pub struct LedProxy<'a>(DaemonProxy<'a>);
+pub struct LedProxyPerkey<'a>(LedProxyBlocking<'a>);
 
-impl<'a> LedProxy<'a> {
+impl<'a> LedProxyPerkey<'a> {
     #[inline]
     pub fn new(conn: &Connection) -> Result<Self> {
-        Ok(LedProxy(DaemonProxy::new(conn)?))
+        Ok(LedProxyPerkey(LedProxyBlocking::new(conn)?))
     }
 
     #[inline]
-    pub fn proxy(&self) -> &DaemonProxy<'a> {
+    pub fn proxy(&self) -> &LedProxyBlocking<'a> {
         &self.0
     }
 
-    #[inline]
-    pub fn get_led_brightness(&self) -> Result<i16> {
-        self.0.led_brightness()
-    }
-
-    #[inline]
-    pub fn set_led_brightness(&self, level: LedBrightness) -> Result<()> {
-        self.0.set_brightness(level)?;
-        Ok(())
-    }
-
-    /// Set the keyboard LED to enabled while the device is awake
-    #[inline]
-    pub fn set_awake_enabled(&self, enabled: bool) -> Result<()> {
-        self.0.set_awake_enabled(enabled)?;
-        Ok(())
-    }
-
-    /// Set the keyboard LED suspend animation to enabled while the device is suspended
-    #[inline]
-    pub fn set_sleep_enabled(&self, enabled: bool) -> Result<()> {
-        self.0.set_sleep_enabled(enabled)?;
-        Ok(())
-    }
-
-    #[inline]
-    pub fn next_led_mode(&self) -> Result<()> {
-        self.0.next_led_mode()
-    }
-
-    #[inline]
-    pub fn prev_led_mode(&self) -> Result<()> {
-        self.0.prev_led_mode()
-    }
-
-    #[inline]
-    pub fn next_led_brightness(&self) -> Result<()> {
-        self.0.next_led_brightness()
-    }
-
-    #[inline]
-    pub fn prev_led_brightness(&self) -> Result<()> {
-        self.0.prev_led_brightness()
-    }
-
-    #[inline]
-    pub fn set_led_mode(&self, mode: &AuraEffect) -> Result<()> {
-        self.0.set_led_mode(mode)
-    }
-
-    #[inline]
-    pub fn awake_enabled(&self) -> Result<bool> {
-        self.0.awake_enabled()
-    }
-
-    #[inline]
-    pub fn sleep_enabled(&self) -> Result<bool> {
-        self.0.sleep_enabled()
-    }
-
     /// Write a single colour block.
     ///
     /// Intentionally blocks for 10ms after sending to allow the block to
@@ -186,25 +118,4 @@ impl<'a> LedProxy<'a> {
         // self.0.set_led_mode(&serde_json::to_string(&mode).unwrap())
         Ok(())
     }
-
-    #[inline]
-    pub fn connect_notify_led(&self, send: Sender<AuraEffect>) -> zbus::fdo::Result<()> {
-        self.0.connect_notify_led(move |data| {
-            send.send(data)
-                .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
-            Ok(())
-        })
-    }
-
-    #[inline]
-    pub fn connect_notify_power_states(
-        &self,
-        send: Sender<LedPowerStates>,
-    ) -> zbus::fdo::Result<()> {
-        self.0.connect_notify_power_states(move |data| {
-            send.send(data)
-                .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
-            Ok(())
-        })
-    }
 }

rog-dbus/src/zbus_profile.rs

@@ -19,74 +19,50 @@
 //!
 //! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
 
-use std::sync::mpsc::Sender;
-
-use rog_profiles::{fan_curve_set::FanCurveSet, Profile};
-use zbus::{dbus_proxy, Connection, Result};
+use rog_profiles::{
+    fan_curve_set::{CurveData, FanCurveSet},
+    Profile,
+};
+use zbus_macros::dbus_proxy;
 
 #[dbus_proxy(
     interface = "org.asuslinux.Daemon",
     default_path = "/org/asuslinux/Profile"
 )]
-trait Daemon {
-    /// Get the active `Profile` data
-    fn active_fan_curve_data(&self) -> zbus::Result<FanCurveSet>;
+trait Profile {
+    /// Get the fan-curve data for the currently active Profile
+    fn fan_curve_data(&self, profile: Profile) -> zbus::Result<FanCurveSet>;
 
-    /// Profile, get the active profile
+    /// Fetch the active profile name
     fn active_profile(&self) -> zbus::Result<Profile>;
 
-    /// Get enabled fan curves
+    /// Get a list of profiles that have fan-curves enabled.
     fn enabled_fan_profiles(&self) -> zbus::Result<Vec<Profile>>;
 
-    /// Get all fan curve data
-    fn fan_curves(&self) -> zbus::Result<Vec<FanCurveSet>>;
-
-    /// NextProfile method
+    /// Toggle to next platform_profile. Names provided by `Profiles`.
+    /// If fan-curves are supported will also activate a fan curve for profile.
     fn next_profile(&self) -> zbus::Result<()>;
 
-    /// Profiles method
+    /// Fetch profile names
     fn profiles(&self) -> zbus::Result<Vec<Profile>>;
 
-    /// Set the specific profile as active
+    /// Set this platform_profile name as active
     fn set_active_profile(&self, profile: Profile) -> zbus::Result<()>;
 
-    /// Set a fan curve. If a field is empty then the exisiting saved curve is used
-    fn set_fan_curve(&self, curve: FanCurveSet) -> zbus::Result<()>;
+    /// Set a profile fan curve enabled status. Will also activate a fan curve.
+    fn set_fan_curve_enabled(&self, profile: Profile, enabled: bool) -> zbus::Result<()>;
+
+    /// Set the fan curve for the specified profile, or the profile the user is
+    /// currently in if profile == None. Will also activate the fan curve.
+    fn set_fan_curve(&self, profile: Profile, curve: CurveData) -> zbus::Result<()>;
+
+    /// Reset the stored (self) and device curve to the defaults of the platform.
+    ///
+    /// Each platform_profile has a different default and the defualt can be read
+    /// only for the currently active profile.
+    fn set_active_curve_to_defaults(&self) -> zbus::Result<()>;
 
     /// NotifyProfile signal
     #[dbus_proxy(signal)]
-    fn notify_profile(&self, profile: Profile) -> zbus::Result<()>;
-}
-
-pub struct ProfileProxy<'a>(DaemonProxy<'a>);
-
-impl<'a> ProfileProxy<'a> {
-    #[inline]
-    pub fn new(conn: &Connection) -> Result<Self> {
-        Ok(ProfileProxy(DaemonProxy::new(conn)?))
-    }
-
-    #[inline]
-    pub fn proxy(&self) -> &DaemonProxy<'a> {
-        &self.0
-    }
-
-    #[inline]
-    pub fn profiles(&self) -> Result<Vec<Profile>> {
-        self.0.profiles()
-    }
-
-    #[inline]
-    pub fn next_profile(&self) -> Result<()> {
-        self.0.next_profile()
-    }
-
-    #[inline]
-    pub fn connect_notify_profile(&self, send: Sender<Profile>) -> zbus::fdo::Result<()> {
-        self.0.connect_notify_profile(move |data| {
-            send.send(data)
-                .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
-            Ok(())
-        })
-    }
+    fn notify_profile(&self, profile: Profile) -> zbus::Result<Profile>;
 }

rog-dbus/src/zbus_rogbios.rs

@@ -19,15 +19,13 @@
 //!
 //! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
 
-use std::sync::mpsc::Sender;
-
-use zbus::{dbus_proxy, Connection, Result};
+use zbus_macros::dbus_proxy;
 
 #[dbus_proxy(
     interface = "org.asuslinux.Daemon",
     default_path = "/org/asuslinux/RogBios"
 )]
-trait Daemon {
+trait RogBios {
     /// DedicatedGraphicMode method
     fn dedicated_graphic_mode(&self) -> zbus::Result<i16>;
 
@@ -40,66 +38,21 @@ trait Daemon {
     /// SetPostBootSound method
     fn set_post_boot_sound(&self, on: bool) -> zbus::Result<()>;
 
+    /// PanelOverdrive method
+    fn panel_overdrive(&self) -> zbus::Result<i8>;
+
+    /// SetPanelOverdrive method
+    fn set_panel_overdrive(&self, overdrive: bool) -> zbus::Result<()>;
+
     /// NotifyDedicatedGraphicMode signal
     #[dbus_proxy(signal)]
     fn notify_dedicated_graphic_mode(&self, dedicated: bool) -> zbus::Result<()>;
 
     /// NotifyPostBootSound signal
     #[dbus_proxy(signal)]
-    fn notify_post_boot_sound(&self, dedicated: bool) -> zbus::Result<()>;
-}
-
-pub struct RogBiosProxy<'a>(DaemonProxy<'a>);
-
-impl<'a> RogBiosProxy<'a> {
-    #[inline]
-    pub fn new(conn: &Connection) -> Result<Self> {
-        Ok(RogBiosProxy(DaemonProxy::new(conn)?))
-    }
-
-    #[inline]
-    pub fn proxy(&self) -> &DaemonProxy<'a> {
-        &self.0
-    }
-
-    #[inline]
-    pub fn get_dedicated_gfx(&self) -> Result<i16> {
-        self.0.dedicated_graphic_mode()
-    }
-
-    #[inline]
-    pub fn set_dedicated_gfx(&self, on: bool) -> Result<()> {
-        self.0.set_dedicated_graphic_mode(on)
-    }
-
-    #[inline]
-    pub fn get_post_sound(&self) -> Result<i16> {
-        self.0.post_boot_sound()
-    }
-
-    #[inline]
-    pub fn set_post_sound(&self, on: bool) -> Result<()> {
-        self.0.set_post_boot_sound(on)
-    }
-
-    #[inline]
-    pub fn connect_notify_dedicated_graphic_mode(
-        &self,
-        send: Sender<bool>,
-    ) -> zbus::fdo::Result<()> {
-        self.0.connect_notify_dedicated_graphic_mode(move |data| {
-            send.send(data)
-                .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
-            Ok(())
-        })
-    }
-
-    #[inline]
-    pub fn connect_notify_post_boot_sound(&self, send: Sender<bool>) -> zbus::fdo::Result<()> {
-        self.0.connect_notify_post_boot_sound(move |data| {
-            send.send(data)
-                .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
-            Ok(())
-        })
-    }
+    fn notify_post_boot_sound(&self, sound: bool) -> zbus::Result<()>;
+
+    /// NotifyPanelOverdrive signal
+    #[dbus_proxy(signal)]
+    fn notify_panel_overdrive(&self, overdrive: bool) -> zbus::Result<()>;
 }

rog-dbus/src/zbus_supported.rs

@@ -20,32 +20,13 @@
 //! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
 
 use rog_supported::SupportedFunctions;
-use zbus::{dbus_proxy, Connection, Result};
+use zbus_macros::dbus_proxy;
 
 #[dbus_proxy(
     interface = "org.asuslinux.Daemon",
     default_path = "/org/asuslinux/Supported"
 )]
-trait Daemon {
+trait Supported {
     /// SupportedFunctions method
     fn supported_functions(&self) -> zbus::Result<SupportedFunctions>;
 }
-
-pub struct SupportProxy<'a>(DaemonProxy<'a>);
-
-impl<'a> SupportProxy<'a> {
-    #[inline]
-    pub fn new(conn: &Connection) -> Result<Self> {
-        Ok(SupportProxy(DaemonProxy::new(conn)?))
-    }
-
-    #[inline]
-    pub fn proxy(&self) -> &DaemonProxy<'a> {
-        &self.0
-    }
-
-    #[inline]
-    pub fn get_supported_functions(&self) -> Result<SupportedFunctions> {
-        self.0.supported_functions()
-    }
-}

rog-profiles/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "rog_profiles"
-version = "1.0.0"
+version = "1.1.3"
 authors = ["Luke D. Jones <luke@ljones.dev>"]
 edition = "2018"
 
@@ -13,5 +13,5 @@ udev = "^0.6"
 serde = "^1.0"
 serde_derive = "^1.0"
 
-zvariant = { version = "^2.6", optional = true }
-zvariant_derive = { version = "^2.6", optional = true }
+zvariant = { version = "^3.0", optional = true }
+zvariant_derive = { version = "^3.0", optional = true }

rog-profiles/src/error.rs

@@ -8,7 +8,12 @@ pub enum ProfileError {
     NotSupported,
     NotFound(String),
     Io(std::io::Error),
-    //Zbus(zbus::Error),
+    ParseProfileName,
+    ParseFanCurveDigit(std::num::ParseIntError),
+    /// (pwm/temp, prev, next)
+    ParseFanCurvePrevHigher(&'static str, u8, u8),
+    ParseFanCurvePercentOver100(u8),
+    // Zbus(zbus::Error),
 }
 
 impl fmt::Display for ProfileError {
@@ -21,7 +26,18 @@ impl fmt::Display for ProfileError {
             ProfileError::NotSupported => write!(f, "Not supported"),
             ProfileError::NotFound(deets) => write!(f, "Not found: {}", deets),
             ProfileError::Io(detail) => write!(f, "std::io error: {}", detail),
-            //Error::Zbus(detail) => write!(f, "Zbus error: {}", detail),
+            ProfileError::ParseProfileName => write!(f, "Invalid profile name"),
+            ProfileError::ParseFanCurveDigit(e) => {
+                write!(f, "Could not parse number to 0-255: {}", e)
+            }
+            ProfileError::ParseFanCurvePrevHigher(part, prev, next) => write!(
+                f,
+                "Invalid {}, previous value {} is higher than next value {}",
+                part, prev, next
+            ),
+            ProfileError::ParseFanCurvePercentOver100(value) => {
+                write!(f, "Invalid percentage, {} is higher than 100", value)
+            } // Error::Zbus(detail) => write!(f, "Zbus error: {}", detail),
         }
     }
 }

rog-profiles/src/fan_curve_set.rs

@@ -4,24 +4,24 @@ use udev::Device;
 #[cfg(feature = "dbus")]
 use zvariant_derive::Type;
 
-use crate::{error::ProfileError, write_to_fan, FanCurvePU};
+use crate::{error::ProfileError, FanCurvePU};
 
-pub fn pwm_str(fan: char, index: char) -> String {
+pub(crate) fn pwm_str(fan: char, index: usize) -> String {
     let mut buf = "pwm1_auto_point1_pwm".to_string();
     unsafe {
         let tmp = buf.as_bytes_mut();
         tmp[3] = fan as u8;
-        tmp[15] = index as u8;
+        tmp[15] = char::from_digit(index as u32 + 1, 10).unwrap() as u8;
     }
     buf
 }
 
-pub fn temp_str(fan: char, index: char) -> String {
+pub(crate) fn temp_str(fan: char, index: usize) -> String {
     let mut buf = "pwm1_auto_point1_temp".to_string();
     unsafe {
         let tmp = buf.as_bytes_mut();
         tmp[3] = fan as u8;
-        tmp[15] = index as u8;
+        tmp[15] = char::from_digit(index as u32 + 1, 10).unwrap() as u8;
     }
     buf
 }
@@ -34,10 +34,139 @@ pub struct CurveData {
     pub temp: [u8; 8],
 }
 
+impl std::str::FromStr for CurveData {
+    type Err = ProfileError;
+
+    /// Parse a string to the correct values that the fan curve kernel driver expects
+    ///
+    /// If the fan curve is given with percentage char '%' then the fan power values are converted
+    /// otherwise the expected fan power range is 0-255.
+    ///
+    /// Temperature range is 0-255 in degrees C. You don't want to be setting over 100.
+    fn from_str(input: &str) -> Result<Self, Self::Err> {
+        let mut temp = [0u8; 8];
+        let mut pwm = [0u8; 8];
+        let mut temp_prev = 0;
+        let mut pwm_prev = 0;
+        let mut percentages = false;
+
+        for (index, value) in input.split(',').enumerate() {
+            for (select, num) in value.splitn(2, |c| c == 'c' || c == ':').enumerate() {
+                if num.contains('%') {
+                    percentages = true;
+                }
+                let r = num.trim_matches(|c| c == 'c' || c == ':' || c == '%');
+                let r = r.parse::<u8>().map_err(ProfileError::ParseFanCurveDigit)?;
+
+                if select == 0 {
+                    if temp_prev > r {
+                        return Err(ProfileError::ParseFanCurvePrevHigher(
+                            "temperature",
+                            temp_prev,
+                            r,
+                        ));
+                    }
+                    temp_prev = r;
+                    temp[index] = r;
+                } else {
+                    let mut p = r;
+                    if percentages {
+                        if r > 100 {
+                            return Err(ProfileError::ParseFanCurvePercentOver100(r));
+                        }
+                        p = (p as f32 * 2.55).round() as u8;
+                    }
+                    if pwm_prev > p {
+                        return Err(ProfileError::ParseFanCurvePrevHigher(
+                            "percentage",
+                            pwm_prev,
+                            p,
+                        ));
+                    }
+                    pwm_prev = p;
+                    pwm[index] = p;
+                }
+            }
+        }
+        Ok(Self {
+            fan: FanCurvePU::CPU,
+            pwm,
+            temp,
+        })
+    }
+}
+
+impl CurveData {
+    pub fn set_fan(&mut self, fan: FanCurvePU) {
+        self.fan = fan;
+    }
+
+    fn set_val_from_attr(tmp: &str, device: &Device, buf: &mut [u8; 8]) {
+        if let Some(n) = tmp.chars().nth(15) {
+            let i = n.to_digit(10).unwrap() as usize;
+            let d = device.attribute_value(tmp).unwrap();
+            let d: u8 = d.to_string_lossy().parse().unwrap();
+            buf[i - 1] = d;
+        }
+    }
+
+    fn read_from_device(&mut self, device: &Device) {
+        for attr in device.attributes() {
+            let tmp = attr.name().to_string_lossy();
+            if tmp.starts_with("pwm1") && tmp.ends_with("_temp") {
+                Self::set_val_from_attr(tmp.as_ref(), device, &mut self.temp)
+            }
+            if tmp.starts_with("pwm1") && tmp.ends_with("_pwm") {
+                Self::set_val_from_attr(tmp.as_ref(), device, &mut self.pwm)
+            }
+        }
+    }
+
+    fn init_if_zeroed(&mut self, device: &mut Device) -> std::io::Result<()> {
+        if self.pwm == [0u8; 8] && self.temp == [0u8; 8] {
+            // Need to reset the device to defaults to get the proper profile defaults
+            match self.fan {
+                FanCurvePU::CPU => device.set_attribute_value("pwm1_enable", "3")?,
+                FanCurvePU::GPU => device.set_attribute_value("pwm2_enable", "3")?,
+            };
+            self.read_from_device(device);
+        }
+        Ok(())
+    }
+
+    /// Write this curve to the device fan specified by `self.fan`
+    fn write_to_device(&self, device: &mut Device, enable: bool) -> std::io::Result<()> {
+        let pwm_num = match self.fan {
+            FanCurvePU::CPU => '1',
+            FanCurvePU::GPU => '2',
+        };
+        let enable = if enable { "1" } else { "2" };
+
+        for (index, out) in self.pwm.iter().enumerate() {
+            let pwm = pwm_str(pwm_num, index);
+            device.set_attribute_value(&pwm, &out.to_string())?;
+        }
+
+        for (index, out) in self.temp.iter().enumerate() {
+            let temp = temp_str(pwm_num, index);
+            device.set_attribute_value(&temp, &out.to_string())?;
+        }
+
+        // Enable must be done *after* all points are written
+        match self.fan {
+            FanCurvePU::CPU => device.set_attribute_value("pwm1_enable", enable)?,
+            FanCurvePU::GPU => device.set_attribute_value("pwm2_enable", enable)?,
+        };
+
+        Ok(())
+    }
+}
+
 /// A `FanCurveSet` contains both CPU and GPU fan curve data
 #[cfg_attr(feature = "dbus", derive(Type))]
 #[derive(Deserialize, Serialize, Debug, Clone)]
 pub struct FanCurveSet {
+    pub enabled: bool,
     pub cpu: CurveData,
     pub gpu: CurveData,
 }
@@ -45,6 +174,7 @@ pub struct FanCurveSet {
 impl Default for FanCurveSet {
     fn default() -> Self {
         Self {
+            enabled: false,
             cpu: CurveData {
                 fan: FanCurvePU::CPU,
                 pwm: [0u8; 8],
@@ -60,80 +190,71 @@ impl Default for FanCurveSet {
 }
 
 impl FanCurveSet {
-    pub fn get_device() -> Result<Device, ProfileError> {
-        let mut enumerator = udev::Enumerator::new()?;
-        enumerator.match_subsystem("hwmon")?;
-
-        for device in enumerator.scan_devices().unwrap() {
-            if device.parent_with_subsystem("platform").unwrap().is_some() {
-                if let Some(name) = device.attribute_value("name") {
-                    if name == "asus_custom_fan_curve" {
-                        return Ok(device);
-                    }
-                }
-            }
-        }
-        Err(ProfileError::NotSupported)
+    pub(crate) fn read_cpu_from_device(&mut self, device: &Device) {
+        self.cpu.read_from_device(device);
     }
 
-    pub fn is_supported() -> Result<bool, ProfileError> {
-        if Self::get_device().is_ok() {
-            return Ok(true);
-        }
-
-        Ok(false)
+    pub(crate) fn read_gpu_from_device(&mut self, device: &Device) {
+        self.gpu.read_from_device(device);
     }
 
-    pub fn new() -> Result<(Self, Device), ProfileError> {
-        if let Ok(device) = Self::get_device() {
-            let mut fans = Self {
-                cpu: CurveData::default(),
-                gpu: CurveData::default(),
-            };
-
-            fans.cpu.fan = FanCurvePU::CPU;
-            fans.cpu.fan = FanCurvePU::GPU;
-
-            fans.read_from_device(&device);
-
-            return Ok((fans, device));
-        }
-
-        Err(ProfileError::NotSupported)
+    pub(crate) fn write_cpu_fan(&mut self, device: &mut Device) -> std::io::Result<()> {
+        self.cpu.init_if_zeroed(device)?;
+        self.cpu.write_to_device(device, self.enabled)
     }
 
-    fn set_val_from_attr(tmp: &str, device: &Device, buf: &mut [u8; 8]) {
-        if let Some(n) = tmp.chars().nth(15) {
-            let i = n.to_digit(10).unwrap() as usize;
-            let d = device.attribute_value(tmp).unwrap();
-            let d: u8 = d.to_string_lossy().parse().unwrap();
-            buf[i - 1] = d;
-        }
-    }
-
-    pub fn read_from_device(&mut self, device: &Device) {
-        for attr in device.attributes() {
-            let tmp = attr.name().to_string_lossy();
-            if tmp.starts_with("pwm1") && tmp.ends_with("_temp") {
-                Self::set_val_from_attr(tmp.as_ref(), device, &mut self.cpu.temp)
-            }
-            if tmp.starts_with("pwm1") && tmp.ends_with("_pwm") {
-                Self::set_val_from_attr(tmp.as_ref(), device, &mut self.cpu.pwm)
-            }
-            if tmp.starts_with("pwm2") && tmp.ends_with("_temp") {
-                Self::set_val_from_attr(tmp.as_ref(), device, &mut self.gpu.temp)
-            }
-            if tmp.starts_with("pwm2") && tmp.ends_with("_pwm") {
-                Self::set_val_from_attr(tmp.as_ref(), device, &mut self.gpu.pwm)
-            }
-        }
-    }
-
-    pub fn write_cpu_fan(&self, device: &mut Device) {
-        write_to_fan(&self.cpu, '1', device);
-    }
-
-    pub fn write_gpu_fan(&self, device: &mut Device) {
-        write_to_fan(&self.gpu, '2', device);
+    pub(crate) fn write_gpu_fan(&mut self, device: &mut Device) -> std::io::Result<()> {
+        self.gpu.init_if_zeroed(device)?;
+        self.gpu.write_to_device(device, self.enabled)
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use std::str::FromStr;
+
+    use super::*;
+
+    #[test]
+    fn curve_data_from_str() {
+        let curve =
+            CurveData::from_str("30c:1%,49c:2%,59c:3%,69c:4%,79c:31%,89c:49%,99c:56%,109c:58%")
+                .unwrap();
+        assert_eq!(curve.fan, FanCurvePU::CPU);
+        assert_eq!(curve.temp, [30, 49, 59, 69, 79, 89, 99, 109]);
+        assert_eq!(curve.pwm, [3, 5, 8, 10, 79, 125, 143, 148]);
+    }
+
+    #[test]
+    fn curve_data_from_str_simple() {
+        let curve = CurveData::from_str("30:1,49:2,59:3,69:4,79:31,89:49,99:56,109:58").unwrap();
+        assert_eq!(curve.fan, FanCurvePU::CPU);
+        assert_eq!(curve.temp, [30, 49, 59, 69, 79, 89, 99, 109]);
+        assert_eq!(curve.pwm, [1, 2, 3, 4, 31, 49, 56, 58]);
+    }
+
+    #[test]
+    fn curve_data_from_str_invalid_pwm() {
+        let curve =
+            CurveData::from_str("30c:4%,49c:2%,59c:3%,69c:4%,79c:31%,89c:49%,99c:56%,109c:58%");
+        assert!(&curve.is_err());
+        assert!(matches!(
+            curve,
+            Err(ProfileError::ParseFanCurvePrevHigher(_, _, _))
+        ));
+    }
+
+    #[test]
+    fn check_pwm_str() {
+        assert_eq!(pwm_str('1', 0), "pwm1_auto_point1_pwm");
+        assert_eq!(pwm_str('1', 4), "pwm1_auto_point5_pwm");
+        assert_eq!(pwm_str('1', 7), "pwm1_auto_point8_pwm");
+    }
+
+    #[test]
+    fn check_temp_str() {
+        assert_eq!(temp_str('1', 0), "pwm1_auto_point1_temp");
+        assert_eq!(temp_str('1', 4), "pwm1_auto_point5_temp");
+        assert_eq!(temp_str('1', 7), "pwm1_auto_point8_temp");
     }
 }

rog-profiles/src/lib.rs

@@ -38,7 +38,7 @@ pub fn find_fan_curve_node() -> Result<Option<Device>, ProfileError> {
 }
 
 #[cfg_attr(feature = "dbus", derive(Type))]
-#[derive(Deserialize, Serialize, Debug, Clone, Copy)]
+#[derive(Deserialize, Serialize, Debug, PartialEq, Eq, PartialOrd, Ord, Hash, Clone, Copy)]
 pub enum Profile {
     Balanced,
     Performance,
@@ -51,10 +51,7 @@ impl Profile {
     }
 
     pub fn get_active_profile() -> Result<Profile, ProfileError> {
-        let mut file = OpenOptions::new()
-            .read(true)
-            .open(&PLATFORM_PROFILE)
-            .unwrap_or_else(|_| panic!("{} not found", &PLATFORM_PROFILE));
+        let mut file = OpenOptions::new().read(true).open(&PLATFORM_PROFILE)?;
 
         let mut buf = String::new();
         file.read_to_string(&mut buf)?;
@@ -62,10 +59,7 @@ impl Profile {
     }
 
     pub fn get_profile_names() -> Result<Vec<Profile>, ProfileError> {
-        let mut file = OpenOptions::new()
-            .read(true)
-            .open(&PLATFORM_PROFILES)
-            .unwrap_or_else(|_| panic!("{} not found", &PLATFORM_PROFILES));
+        let mut file = OpenOptions::new().read(true).open(&PLATFORM_PROFILES)?;
 
         let mut buf = String::new();
         file.read_to_string(&mut buf)?;
@@ -73,10 +67,7 @@ impl Profile {
     }
 
     pub fn set_profile(profile: Profile) -> Result<(), ProfileError> {
-        let mut file = OpenOptions::new()
-            .write(true)
-            .open(PLATFORM_PROFILE)
-            .unwrap_or_else(|_| panic!("{} not found", PLATFORM_PROFILE));
+        let mut file = OpenOptions::new().write(true).open(PLATFORM_PROFILE)?;
 
         file.write_all(<&str>::from(profile).as_bytes())?;
         Ok(())
@@ -110,8 +101,21 @@ impl From<&str> for Profile {
     }
 }
 
+impl std::str::FromStr for Profile {
+    type Err = ProfileError;
+
+    fn from_str(profile: &str) -> Result<Self, Self::Err> {
+        match profile.to_ascii_lowercase().trim() {
+            "balanced" => Ok(Profile::Balanced),
+            "performance" => Ok(Profile::Performance),
+            "quiet" => Ok(Profile::Quiet),
+            _ => Err(ProfileError::ParseProfileName),
+        }
+    }
+}
+
 #[cfg_attr(feature = "dbus", derive(Type))]
-#[derive(Deserialize, Serialize, Debug, Clone, Copy)]
+#[derive(Deserialize, Serialize, Debug, PartialEq, Clone, Copy)]
 pub enum FanCurvePU {
     CPU,
     GPU,
@@ -126,27 +130,63 @@ impl From<FanCurvePU> for &str {
     }
 }
 
+impl std::str::FromStr for FanCurvePU {
+    type Err = ProfileError;
+
+    fn from_str(fan: &str) -> Result<Self, Self::Err> {
+        match fan.to_ascii_lowercase().trim() {
+            "cpu" => Ok(FanCurvePU::CPU),
+            "gpu" => Ok(FanCurvePU::GPU),
+            _ => Err(ProfileError::ParseProfileName),
+        }
+    }
+}
+
 impl Default for FanCurvePU {
     fn default() -> Self {
         Self::CPU
     }
 }
 
-/// Main purpose of `FanCurves` is to enable retoring state on system boot
+/// Main purpose of `FanCurves` is to enable restoring state on system boot
 #[cfg_attr(feature = "dbus", derive(Type))]
 #[derive(Deserialize, Serialize, Debug, Default)]
 pub struct FanCurveProfiles {
-    enabled: Vec<Profile>,
     balanced: FanCurveSet,
     performance: FanCurveSet,
     quiet: FanCurveSet,
 }
 
 impl FanCurveProfiles {
+    pub fn get_device() -> Result<Device, ProfileError> {
+        let mut enumerator = udev::Enumerator::new()?;
+        enumerator.match_subsystem("hwmon")?;
+
+        for device in enumerator.scan_devices()? {
+            if device.parent_with_subsystem("platform")?.is_some() {
+                if let Some(name) = device.attribute_value("name") {
+                    if name == "asus_custom_fan_curve" {
+                        return Ok(device);
+                    }
+                }
+            }
+        }
+        Err(ProfileError::NotSupported)
+    }
+
+    pub fn is_supported() -> Result<bool, ProfileError> {
+        if Self::get_device().is_ok() {
+            return Ok(true);
+        }
+
+        Ok(false)
+    }
+
     ///
     pub fn read_from_dev_profile(&mut self, profile: Profile, device: &Device) {
         let mut tmp = FanCurveSet::default();
-        tmp.read_from_device(device);
+        tmp.read_cpu_from_device(device);
+        tmp.read_gpu_from_device(device);
         match profile {
             Profile::Balanced => self.balanced = tmp,
             Profile::Performance => self.performance = tmp,
@@ -154,22 +194,69 @@ impl FanCurveProfiles {
         }
     }
 
-    pub fn write_to_platform(&self, profile: Profile, device: &mut Device) {
+    /// Reset the stored (self) and device curve to the defaults of the platform.
+    ///
+    /// Each platform_profile has a different default and the defualt can be read
+    /// only for the currently active profile.
+    pub fn set_active_curve_to_defaults(
+        &mut self,
+        profile: Profile,
+        device: &mut Device,
+    ) -> std::io::Result<()> {
+        // Do reset
+        device.set_attribute_value("pwm1_enable", "3")?;
+        device.set_attribute_value("pwm2_enable", "3")?;
+        // Then read
+        let mut tmp = FanCurveSet::default();
+        tmp.read_cpu_from_device(device);
+        tmp.read_gpu_from_device(device);
+        match profile {
+            Profile::Balanced => self.balanced = tmp,
+            Profile::Performance => self.performance = tmp,
+            Profile::Quiet => self.quiet = tmp,
+        }
+        Ok(())
+    }
+
+    /// Write the curves for the selected profile to the device. If the curve is
+    /// in the enabled list it will become active. If the curve is zeroed it will be initialised
+    /// to a default read from the system.
+    // TODO: Make this return an error if curve is zeroed
+    pub fn write_profile_curve_to_platform(
+        &mut self,
+        profile: Profile,
+        device: &mut Device,
+    ) -> std::io::Result<()> {
         let fans = match profile {
-            Profile::Balanced => &self.balanced,
-            Profile::Performance => &self.performance,
-            Profile::Quiet => &self.quiet,
+            Profile::Balanced => &mut self.balanced,
+            Profile::Performance => &mut self.performance,
+            Profile::Quiet => &mut self.quiet,
         };
-        fans.write_cpu_fan(device);
-        fans.write_gpu_fan(device);
+        fans.write_cpu_fan(device)?;
+        fans.write_gpu_fan(device)?;
+        Ok(())
     }
 
-    pub fn get_enabled_curve_profiles(&self) -> &[Profile] {
-        &self.enabled
+    pub fn get_enabled_curve_profiles(&self) -> Vec<Profile> {
+        let mut tmp = Vec::new();
+        if self.balanced.enabled {
+            tmp.push(Profile::Balanced);
+        }
+        if self.performance.enabled {
+            tmp.push(Profile::Performance);
+        }
+        if self.quiet.enabled {
+            tmp.push(Profile::Quiet);
+        }
+        tmp
     }
 
-    pub fn set_enabled_curve_profiles(&mut self, profiles: Vec<Profile>) {
-        self.enabled = profiles
+    pub fn set_profile_curve_enabled(&mut self, profile: Profile, enabled: bool) {
+        match profile {
+            Profile::Balanced => self.balanced.enabled = enabled,
+            Profile::Performance => self.performance.enabled = enabled,
+            Profile::Quiet => self.quiet.enabled = enabled,
+        }
     }
 
     pub fn get_all_fan_curves(&self) -> Vec<FanCurveSet> {
@@ -180,11 +267,11 @@ impl FanCurveProfiles {
         ]
     }
 
-    pub fn get_active_fan_curves(&self) -> &FanCurveSet {
-        match Profile::get_active_profile().unwrap() {
-            Profile::Balanced => &self.balanced,
-            Profile::Performance => &self.performance,
-            Profile::Quiet => &self.quiet,
+    pub fn get_active_fan_curves(&self) -> Result<&FanCurveSet, ProfileError> {
+        match Profile::get_active_profile()? {
+            Profile::Balanced => Ok(&self.balanced),
+            Profile::Performance => Ok(&self.performance),
+            Profile::Quiet => Ok(&self.quiet),
         }
     }
 
@@ -213,16 +300,7 @@ impl FanCurveProfiles {
         }
     }
 
-    pub fn write_and_set_fan_curve(
-        &mut self,
-        curve: CurveData,
-        profile: Profile,
-        device: &mut Device,
-    ) {
-        match curve.fan {
-            FanCurvePU::CPU => write_to_fan(&curve, '1', device),
-            FanCurvePU::GPU => write_to_fan(&curve, '2', device),
-        }
+    pub fn save_fan_curve(&mut self, curve: CurveData, profile: Profile) -> std::io::Result<()> {
         match profile {
             Profile::Balanced => match curve.fan {
                 FanCurvePU::CPU => self.balanced.cpu = curve,
@@ -237,36 +315,6 @@ impl FanCurveProfiles {
                 FanCurvePU::GPU => self.quiet.gpu = curve,
             },
         }
-    }
-}
-
-pub fn write_to_fan(curve: &CurveData, pwm_num: char, device: &mut Device) {
-    let mut pwm = "pwmN_auto_pointN_pwm".to_string();
-
-    dbg!(&device);
-    for (index, out) in curve.pwm.iter().enumerate() {
-        unsafe {
-            let buf = pwm.as_bytes_mut();
-            buf[3] = pwm_num as u8;
-            // Should be quite safe to unwrap as we're not going over 8
-            buf[15] = char::from_digit(index as u32 + 1, 10).unwrap() as u8;
-        }
-        let out = out.to_string();
-        dbg!(&pwm);
-        dbg!(&out);
-        device.set_attribute_value(&pwm, &out).unwrap();
-    }
-
-    let mut pwm = "pwmN_auto_pointN_temp".to_string();
-
-    for (index, out) in curve.temp.iter().enumerate() {
-        unsafe {
-            let buf = pwm.as_bytes_mut();
-            buf[3] = pwm_num as u8;
-            // Should be quite safe to unwrap as we're not going over 8
-            buf[15] = char::from_digit(index as u32 + 1, 10).unwrap() as u8;
-        }
-        let out = out.to_string();
-        device.set_attribute_value(&pwm, &out).unwrap();
+        Ok(())
     }
 }

rog-supported/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "rog_supported"
-version = "4.0.0"
+version = "4.2.1"
 license = "MPL-2.0"
 readme = "README.md"
 authors = ["Luke <luke@ljones.dev>"]
@@ -13,5 +13,5 @@ edition = "2018"
 rog_aura = { path = "../rog-aura" }
 serde = "^1.0"
 serde_derive = "^1.0"
-zvariant = "^2.6"
-zvariant_derive = "^2.6"
+zvariant = "^3.0"
+zvariant_derive = "^3.0"

rog-supported/src/lib.rs

@@ -1,6 +1,6 @@
 pub static VERSION: &str = env!("CARGO_PKG_VERSION");
 
-use rog_aura::AuraModeNum;
+use rog_aura::{AuraModeNum, AuraZone};
 use serde_derive::{Deserialize, Serialize};
 use std::fmt;
 use zvariant_derive::Type;
@@ -30,16 +30,20 @@ pub struct PlatformProfileFunctions {
 
 #[derive(Serialize, Deserialize, Type, Debug)]
 pub struct LedSupportedFunctions {
+    pub prod_id: String,
     pub brightness_set: bool,
     pub stock_led_modes: Vec<AuraModeNum>,
-    pub multizone_led_mode: bool,
+    pub multizone_led_mode: Vec<AuraZone>,
     pub per_key_led_mode: bool,
 }
 
 #[derive(Serialize, Deserialize, Type, Debug)]
 pub struct RogBiosSupportedFunctions {
-    pub post_sound_toggle: bool,
-    pub dedicated_gfx_toggle: bool,
+    pub post_sound: bool,
+    pub dedicated_gfx: bool,
+    pub panel_overdrive: bool,
+    pub dgpu_disable: bool,
+    pub egpu_enable: bool,
 }
 
 impl fmt::Display for SupportedFunctions {
@@ -80,14 +84,18 @@ impl fmt::Display for LedSupportedFunctions {
         writeln!(f, "LED:")?;
         writeln!(f, "\tBrightness control: {}", self.brightness_set)?;
         writeln!(f, "\tStock LED modes: {:?}", self.stock_led_modes)?;
-        writeln!(f, "\tMultizone LED mode: {}", self.multizone_led_mode)?;
+        writeln!(f, "\tMultizone LED mode: {:?}", self.multizone_led_mode)?;
         writeln!(f, "\tPer key LED mode: {}", self.per_key_led_mode)
     }
 }
 impl fmt::Display for RogBiosSupportedFunctions {
     fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
         writeln!(f, "ROG BIOS:")?;
-        writeln!(f, "\tPOST sound toggle: {}", self.post_sound_toggle)?;
-        writeln!(f, "\tDedicated GFX toggle: {}", self.dedicated_gfx_toggle)
+        writeln!(f, "\tPOST sound switch: {}", self.post_sound)?;
+        writeln!(f, "\tPanel Overdrive: {}", self.panel_overdrive)?;
+        writeln!(f, "\tdGPU disable switch: {}", self.dgpu_disable)?;
+        writeln!(f, "\teGPU enable switch: {}", self.egpu_enable)?;
+        writeln!(f, "\tDedicated GFX switch: {}", self.dedicated_gfx)?;
+        Ok(())
     }
 }

tmp-aura-examples/aura-rgb-ball.rs

@@ -1,5 +1,5 @@
 use rog_aura::{GX502Layout, Key, KeyColourArray, KeyLayout};
-use rog_dbus::RogDbusClient;
+use rog_dbus::RogDbusClientBlocking;
 use std::collections::LinkedList;
 
 #[derive(Debug, Clone)]
@@ -52,7 +52,7 @@ impl Ball {
 }
 
 fn main() -> Result<(), Box<dyn std::error::Error>> {
-    let (dbus, _) = RogDbusClient::new()?;
+    let (dbus, _) = RogDbusClientBlocking::new()?;
 
     let mut colours = KeyColourArray::new();
 
@@ -60,8 +60,6 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
 
     let mut balls = [Ball::new(2, 1, 12), Ball::new(4, 6, 12)];
 
-    dbus.proxies().led().init_effect()?;
-
     let rows = layout.get_rows();
     loop {
         for (n, ball) in balls.iter_mut().enumerate() {