Issue #12 - Cannot remove entity_id in configuration

Issue #09 - Hide preset that are not configured
Issue #04 - Add service to update the temperature of a preset
Issue #02 - Limits the usable presets

custom_components/versatile_thermostat/climate.py

@@ -4,6 +4,8 @@ import logging
 from datetime import timedelta, datetime
 from typing import Any, Mapping
 
+import voluptuous as vol
+
 from homeassistant.core import (
     HomeAssistant,
     callback,
@@ -23,7 +25,7 @@ from homeassistant.helpers.event import (
 )
 
 from homeassistant.exceptions import ConditionError
-from homeassistant.helpers import condition
+from homeassistant.helpers import condition, entity_platform, config_validation as cv
 
 from homeassistant.components.climate.const import (
     ATTR_PRESET_MODE,
@@ -62,6 +64,8 @@ from homeassistant.const import (
     ATTR_ENTITY_ID,
     SERVICE_TURN_OFF,
     SERVICE_TURN_ON,
+    STATE_HOME,
+    STATE_NOT_HOME,
 )
 
 from .const import (
@@ -79,17 +83,19 @@ from .const import (
     CONF_NO_MOTION_PRESET,
     CONF_DEVICE_POWER,
     CONF_PRESETS,
+    CONF_PRESETS_AWAY,
     CONF_CYCLE_MIN,
     CONF_PROP_FUNCTION,
-    CONF_PROP_BIAS,
-    CONF_TPI_COEF_C,
-    CONF_TPI_COEF_T,
+    CONF_TPI_COEF_INT,
+    CONF_TPI_COEF_EXT,
     CONF_PRESENCE_SENSOR,
-    CONF_NO_PRESENCE_PRESET,
-    CONF_NO_PRESENCE_TEMP_OFFSET,
+    CONF_PRESET_POWER,
     SUPPORT_FLAGS,
     PRESET_POWER,
     PROPORTIONAL_FUNCTION_TPI,
+    SERVICE_SET_PRESENCE,
+    SERVICE_SET_PRESET_TEMPERATURE,
+    PRESET_AWAY_SUFFIX,
 )
 
 from .prop_algorithm import PropAlgorithm
@@ -112,7 +118,6 @@ async def async_setup_entry(
     heater_entity_id = entry.data.get(CONF_HEATER)
     cycle_min = entry.data.get(CONF_CYCLE_MIN)
     proportional_function = entry.data.get(CONF_PROP_FUNCTION)
-    proportional_bias = entry.data.get(CONF_PROP_BIAS)
     temp_sensor_entity_id = entry.data.get(CONF_TEMP_SENSOR)
     ext_temp_sensor_entity_id = entry.data.get(CONF_EXTERNAL_TEMP_SENSOR)
     power_sensor_entity_id = entry.data.get(CONF_POWER_SENSOR)
@@ -124,11 +129,10 @@ async def async_setup_entry(
     motion_preset = entry.data.get(CONF_MOTION_PRESET)
     no_motion_preset = entry.data.get(CONF_NO_MOTION_PRESET)
     device_power = entry.data.get(CONF_DEVICE_POWER)
-    tpi_coefc = entry.data.get(CONF_TPI_COEF_C)
-    tpi_coeft = entry.data.get(CONF_TPI_COEF_T)
+    tpi_coef_int = entry.data.get(CONF_TPI_COEF_INT)
+    tpi_coef_ext = entry.data.get(CONF_TPI_COEF_EXT)
     presence_sensor_entity_id = entry.data.get(CONF_PRESENCE_SENSOR)
-    no_presence_preset = entry.data.get(CONF_NO_PRESENCE_PRESET)
-    no_presence_offset = entry.data.get(CONF_NO_PRESENCE_TEMP_OFFSET)
+    power_temp = entry.data.get(CONF_PRESET_POWER)
 
     presets = {}
     for (key, value) in CONF_PRESETS.items():
@@ -138,6 +142,14 @@ async def async_setup_entry(
         else:
             _LOGGER.debug("value %s not found in Entry", value)
 
+    presets_away = {}
+    for (key, value) in CONF_PRESETS_AWAY.items():
+        _LOGGER.debug("looking for key=%s, value=%s", key, value)
+        if value in entry.data:
+            presets_away[key] = entry.data.get(value)
+        else:
+            _LOGGER.debug("value %s not found in Entry", value)
+
     async_add_entities(
         [
             VersatileThermostat(
@@ -147,7 +159,6 @@ async def async_setup_entry(
                 heater_entity_id,
                 cycle_min,
                 proportional_function,
-                proportional_bias,
                 temp_sensor_entity_id,
                 ext_temp_sensor_entity_id,
                 power_sensor_entity_id,
@@ -159,17 +170,39 @@ async def async_setup_entry(
                 motion_preset,
                 no_motion_preset,
                 presets,
+                presets_away,
                 device_power,
-                tpi_coefc,
-                tpi_coeft,
+                tpi_coef_int,
+                tpi_coef_ext,
                 presence_sensor_entity_id,
-                no_presence_preset,
-                no_presence_offset,
+                power_temp,
             )
         ],
         True,
     )
 
+    # Add services
+    platform = entity_platform.async_get_current_platform()
+    platform.async_register_entity_service(
+        SERVICE_SET_PRESENCE,
+        {
+            vol.Required("presence"): vol.In(
+                [STATE_ON, STATE_OFF, STATE_HOME, STATE_NOT_HOME]
+            ),
+        },
+        "service_set_presence",
+    )
+
+    platform.async_register_entity_service(
+        SERVICE_SET_PRESET_TEMPERATURE,
+        {
+            vol.Required("preset"): vol.In(CONF_PRESETS),
+            vol.Optional("temperature"): vol.Coerce(float),
+            vol.Optional("temperature_away"): vol.Coerce(float),
+        },
+        "service_set_preset_temperature",
+    )
+
 
 class VersatileThermostat(ClimateEntity, RestoreEntity):
     """Representation of a Versatile Thermostat device."""
@@ -178,6 +211,7 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
     _heater_entity_id: str
     _prop_algorithm: PropAlgorithm
     _async_cancel_cycle: CALLBACK_TYPE
+    _attr_preset_modes: list[str] | None
 
     def __init__(
         self,
@@ -187,7 +221,6 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
         heater_entity_id,
         cycle_min,
         proportional_function,
-        proportional_bias,
         temp_sensor_entity_id,
         ext_temp_sensor_entity_id,
         power_sensor_entity_id,
@@ -199,12 +232,12 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
         motion_preset,
         no_motion_preset,
         presets,
+        presets_away,
         device_power,
-        tpi_coefc,
-        tpi_coeft,
+        tpi_coef_int,
+        tpi_coef_ext,
         presence_sensor_entity_id,
-        no_presence_preset,
-        no_presence_offset,
+        power_temp,
     ) -> None:
         """Initialize the thermostat."""
 
@@ -218,7 +251,6 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
         self._heater_entity_id = heater_entity_id
         self._cycle_min = cycle_min
         self._proportional_function = proportional_function
-        self._proportional_bias = proportional_bias
         self._temp_sensor_entity_id = temp_sensor_entity_id
         self._ext_temp_sensor_entity_id = ext_temp_sensor_entity_id
         self._power_sensor_entity_id = power_sensor_entity_id
@@ -230,22 +262,18 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
         self._motion_delay_sec = motion_delay_sec
         self._motion_preset = motion_preset
         self._no_motion_preset = no_motion_preset
-        self._tpi_coefc = tpi_coefc
-        self._tpi_coeft = tpi_coeft
-        self._presence_sensor_entity_id = presence_sensor_entity_id
-        self._no_presence_preset = no_presence_preset
-        self._no_presence_offset = no_presence_offset
-
-        self._presence_on = self._presence_sensor_entity_id and (
-            self._no_presence_preset is not None or self._no_presence_offset is not None
+        self._motion_on = (
+            self._motion_sensor_entity_id is not None
+            and self._motion_preset is not None
+            and self._no_motion_preset is not None
         )
-        if self._presence_on:
-            if self._no_presence_preset is not None:
-                self._no_presence_offset = 0
-        else:
-            self._no_presence_preset = None
-            self._no_presence_offset = 0
-            _LOGGER.info("%s - Presence management is not fully configured.", self)
+
+        self._tpi_coef_int = tpi_coef_int
+        self._tpi_coef_ext = tpi_coef_ext
+        self._presence_sensor_entity_id = presence_sensor_entity_id
+        self._power_temp = power_temp
+
+        self._presence_on = self._presence_sensor_entity_id != None
 
         # TODO if self.ac_mode:
         #    self.hvac_list = [HVAC_MODE_COOL, HVAC_MODE_OFF]
@@ -257,17 +285,16 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
         self._saved_hvac_mode = self._hvac_mode
 
         self._support_flags = SUPPORT_FLAGS
-        if len(presets):
-            self._support_flags = SUPPORT_FLAGS | SUPPORT_PRESET_MODE
-            self._attr_preset_modes = (
-                [PRESET_NONE] + list(presets.keys()) + [PRESET_ACTIVITY]
-            )
-            _LOGGER.debug("Set preset_modes to %s", self._attr_preset_modes)
-        else:
-            _LOGGER.debug("No preset_modes")
-            self._attr_preset_modes = [PRESET_NONE]
+
         self._presets = presets
-        _LOGGER.debug("%s - presets are set to: %s", self, self._presets)
+        self._presets_away = presets_away
+
+        _LOGGER.debug(
+            "%s - presets are set to: %s, away: %s",
+            self,
+            self._presets,
+            self._presets_away,
+        )
         # Will be restored if possible
         self._attr_preset_mode = None
         self._saved_preset_mode = None
@@ -306,14 +333,13 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
             _LOGGER.warning(
                 "Using TPI function but not external temperature sensor is set. Removing the delta temp ext factor. Thermostat will not be fully operationnal"  # pylint: disable=line-too-long
             )
-            self._tpi_coeft = 0
+            self._tpi_coef_ext = 0
 
         # Initiate the ProportionalAlgorithm
         self._prop_algorithm = PropAlgorithm(
             self._proportional_function,
-            self._proportional_bias,
-            self._tpi_coefc,
-            self._tpi_coeft,
+            self._tpi_coef_int,
+            self._tpi_coef_ext,
             self._cycle_min,
         )
 
@@ -329,6 +355,27 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
         self._overpowering_state = None
         self._presence_state = None
 
+        # Calculate all possible presets
+        self._attr_preset_modes = [PRESET_NONE]
+        if len(presets):
+            self._support_flags = SUPPORT_FLAGS | SUPPORT_PRESET_MODE
+
+            for k, v in presets.items():
+                if v != 0.0:
+                    self._attr_preset_modes.append(k)
+
+            # self._attr_preset_modes = (
+            #    [PRESET_NONE] + list(presets.keys()) + [PRESET_ACTIVITY]
+            # )
+            _LOGGER.debug(
+                "After adding presets, preset_modes to %s", self._attr_preset_modes
+            )
+        else:
+            _LOGGER.debug("No preset_modes")
+
+        if self._motion_on:
+            self._attr_preset_modes.append(PRESET_ACTIVITY)
+
         _LOGGER.debug(
             "%s - Creation of a new VersatileThermostat entity: unique_id=%s heater_entity_id=%s",
             self,
@@ -427,15 +474,18 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
         await self._async_set_preset_mode_internal(preset_mode)
         await self._async_control_heating()
 
-    async def _async_set_preset_mode_internal(self, preset_mode):
+    async def _async_set_preset_mode_internal(self, preset_mode, force=False):
         """Set new preset mode."""
-        _LOGGER.info("%s - Set preset_mode: %s", self, preset_mode)
-        if preset_mode not in (self._attr_preset_modes or []):
+        _LOGGER.info("%s - Set preset_mode: %s force=%s", self, preset_mode, force)
+        if (
+            preset_mode not in (self._attr_preset_modes or [])
+            and preset_mode != PRESET_POWER
+        ):
             raise ValueError(
                 f"Got unsupported preset_mode {preset_mode}. Must be one of {self._attr_preset_modes}"  # pylint: disable=line-too-long
             )
 
-        if preset_mode == self._attr_preset_mode:
+        if preset_mode == self._attr_preset_mode and not force:
             # I don't think we need to call async_write_ha_state if we didn't change the state
             return
         if preset_mode == PRESET_NONE:
@@ -449,16 +499,28 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
             if self._attr_preset_mode == PRESET_NONE:
                 self._saved_target_temp = self._target_temp
             self._attr_preset_mode = preset_mode
-            self._target_temp = self._presets[preset_mode]
+            preset_temp = self.find_preset_temp(preset_mode)
+            self._target_temp = (
+                preset_temp if preset_mode != PRESET_POWER else self._power_temp
+            )
 
         # Don't saved preset_mode if we are in POWER mode or in Away mode and presence detection is on
-        if preset_mode != PRESET_POWER and (
-            not self._presence_on or preset_mode != self._no_presence_preset
-        ):
+        if preset_mode != PRESET_POWER:
             self._saved_preset_mode = self._attr_preset_mode
 
         self.recalculate()
 
+    def find_preset_temp(self, preset_mode):
+        """Find the right temperature of a preset considering the presence if configured"""
+        if self._presence_on is False or self._presence_state in [STATE_ON, STATE_HOME]:
+            return self._presets[preset_mode]
+        else:
+            return self._presets_away[self.get_preset_away_name(preset_mode)]
+
+    def get_preset_away_name(self, preset_mode):
+        """Get the preset name in away mode (when presence is off)"""
+        return preset_mode + PRESET_AWAY_SUFFIX
+
     async def async_set_fan_mode(self, fan_mode):
         """Set new target fan mode."""
         _LOGGER.info("%s - Set fan mode: %s", self, fan_mode)
@@ -1048,65 +1110,48 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
         _LOGGER.debug("%s - Updating presence. New state is %s", self, new_state)
         self._presence_state = new_state
         if self._attr_preset_mode == PRESET_POWER or self._presence_on is False:
+            _LOGGER.info(
+                "%s - Ignoring presence change cause in Power preset or presence not configured",
+                self,
+            )
             return
-        if new_state is None or new_state not in (STATE_OFF, STATE_ON):
+        if new_state is None or new_state not in (
+            STATE_OFF,
+            STATE_ON,
+            STATE_HOME,
+            STATE_NOT_HOME,
+        ):
+            return
+        if self._attr_preset_mode not in [PRESET_BOOST, PRESET_COMFORT, PRESET_ECO]:
             return
 
-        # Change temperature or preset
-        if self._no_presence_preset:
-            _LOGGER.debug("%s - presence change in preset mode", self)
-            new_preset = None
-            no_presence_preset = self._no_presence_preset
-            if new_state == STATE_OFF:
-                new_preset = no_presence_preset
-                self._saved_preset_mode = self._attr_preset_mode
-                _LOGGER.info(
-                    "%s - No one is at home. Set to preset %s (saved_preset is %s)",
-                    self,
-                    new_preset,
-                    self._saved_preset_mode,
-                )
-            elif self._attr_preset_mode == no_presence_preset:
-                new_preset = self._saved_preset_mode
-                _LOGGER.info(
-                    "%s - Someone is back home. Restoring preset to %s",
-                    self,
-                    new_preset,
-                )
-            else:
-                _LOGGER.debug(
-                    "%s - presence change ignored (not in %s preset or not ON)",
-                    self,
-                    no_presence_preset,
-                )
-            if new_preset:
-                self.hass.create_task(self.async_set_preset_mode(new_preset))
+        # Change temperature with preset named _way
+        new_temp = None
+        if new_state == STATE_ON or new_state == STATE_HOME:
+            new_temp = self._presets[self._attr_preset_mode]
+            _LOGGER.info(
+                "%s - Someone is back home. Restoring temperature to %.2f",
+                self,
+                new_temp,
+            )
         else:
-            new_temp = None
-            if new_state == STATE_OFF:
-                self._saved_target_temp = self._target_temp
-                _LOGGER.info(
-                    "%s - No one is at home. Apply offset to temperature %.2f (saved_target_temp is %.2f)",
-                    self,
-                    self._no_presence_offset,
-                    self._saved_target_temp,
-                )
-                new_temp = self._target_temp + self._no_presence_offset
-            else:
-                new_temp = self._saved_target_temp
-                _LOGGER.info(
-                    "%s - Someone is back home. Restoring temperature to %.2f",
-                    self,
-                    self._saved_target_temp,
-                )
-            if new_temp is not None:
-                _LOGGER.debug(
-                    "%s - presence change in temperature mode new_temp will be: %.2f",
-                    self,
-                    new_temp,
-                )
-                self._target_temp = new_temp
-                self.recalculate()
+            new_temp = self._presets_away[
+                self.get_preset_away_name(self._attr_preset_mode)
+            ]
+            _LOGGER.info(
+                "%s - No one is at home. Apply temperature %.2f",
+                self,
+                new_temp,
+            )
+
+        if new_temp is not None:
+            _LOGGER.debug(
+                "%s - presence change in temperature mode new_temp will be: %.2f",
+                self,
+                new_temp,
+            )
+            self._target_temp = new_temp
+            self.recalculate()
 
     def _update_motion_temp(self):
         """Update the temperature considering the ACTIVITY preset and current motion state"""
@@ -1284,11 +1329,17 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
         """Update the custom extra attributes for the entity"""
 
         self._attr_extra_state_attributes = {
-            "away_temp": self._presets[PRESET_AWAY],
             "eco_temp": self._presets[PRESET_ECO],
             "boost_temp": self._presets[PRESET_BOOST],
             "comfort_temp": self._presets[PRESET_COMFORT],
-            "power_temp": self._presets[PRESET_POWER],
+            "eco_away_temp": self._presets_away[self.get_preset_away_name(PRESET_ECO)],
+            "boost_away_temp": self._presets_away[
+                self.get_preset_away_name(PRESET_BOOST)
+            ],
+            "comfort_away_temp": self._presets_away[
+                self.get_preset_away_name(PRESET_COMFORT)
+            ],
+            "power_temp": self._power_temp,
             "on_percent": self._prop_algorithm.on_percent,
             "on_time_sec": self._prop_algorithm.on_time_sec,
             "off_time_sec": self._prop_algorithm.off_time_sec,
@@ -1296,18 +1347,11 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
             "current_power": self._current_power,
             "current_power_max": self._current_power_max,
             "cycle_min": self._cycle_min,
-            "bias": self._proportional_bias,
             "function": self._proportional_function,
-            "tpi_coefc": self._tpi_coefc,
-            "tpi_coeft": self._tpi_coeft,
+            "tpi_coef_int": self._tpi_coef_int,
+            "tpi_coef_ext": self._tpi_coef_ext,
             "saved_preset_mode": self._saved_preset_mode,
             "saved_target_temp": self._saved_target_temp,
-            "no_presence_preset": self._no_presence_preset
-            if self._presence_on
-            else None,
-            "no_presence_offset": self._no_presence_offset
-            if self._presence_on
-            else None,
             "window_state": self._window_state,
             "motion_state": self._motion_state,
             "overpowering_state": self._overpowering_state,
@@ -1327,3 +1371,49 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
         Note: this don't work either
         """
         _LOGGER.info("%s - The config entry have been updated.")
+
+    async def service_set_presence(self, presence):
+        """Called by a service call:
+        service: versatile_thermostat.set_presence
+        data:
+            presence: "off"
+        target:
+            entity_id: climate.thermostat_1
+        """
+        _LOGGER.info("%s - Calling service_set_presence, presence: %s", self, presence)
+        self._update_presence(presence)
+
+    async def service_set_preset_temperature(
+        self, preset, temperature=None, temperature_away=None
+    ):
+        """Called by a service call:
+        service: versatile_thermostat.set_preset_temperature
+        data:
+            temperature: 17.8
+            preset: boost
+            temperature_away: 15
+        target:
+            entity_id: climate.thermostat_2
+        """
+        _LOGGER.info(
+            "%s - Calling service_set_preset_temperature, preset: %s, temperature: %s, temperature_away: %s",
+            self,
+            preset,
+            temperature,
+            temperature_away,
+        )
+        if preset in self._presets:
+            if temperature is not None:
+                self._presets[preset] = temperature
+            if self._presence_on and temperature_away is not None:
+                self._presets_away[self.get_preset_away_name(preset)] = temperature_away
+        else:
+            _LOGGER.warning(
+                "%s - No preset %s configured for this thermostat. Ignoring set_preset_temperature call",
+                self,
+                preset,
+            )
+
+        # If the changed preset is active, change the current temperature
+        if self._attr_preset_mode == preset:
+            await self._async_set_preset_mode_internal(preset, force=True)

custom_components/versatile_thermostat/config_flow.py

@@ -2,9 +2,12 @@
 from __future__ import annotations
 
 import logging
-
+import copy
 import voluptuous as vol
 
+from collections.abc import Mapping
+from typing import Any
+
 from homeassistant.core import callback
 from homeassistant.config_entries import (
     ConfigEntry,
@@ -33,17 +36,14 @@ from .const import (
     CONF_NO_MOTION_PRESET,
     CONF_DEVICE_POWER,
     CONF_CYCLE_MIN,
+    CONF_PRESET_POWER,
     CONF_PRESETS,
+    CONF_PRESETS_AWAY,
     CONF_PRESETS_SELECTIONABLE,
     CONF_PROP_FUNCTION,
-    CONF_PROP_BIAS,
-    CONF_TPI_COEF_T,
-    CONF_TPI_COEF_C,
+    CONF_TPI_COEF_EXT,
+    CONF_TPI_COEF_INT,
     CONF_PRESENCE_SENSOR,
-    CONF_NO_PRESENCE_PRESET,
-    CONF_NO_PRESENCE_TEMP_OFFSET,
-    PROPORTIONAL_FUNCTION_ATAN,
-    PROPORTIONAL_FUNCTION_LINEAR,
     PROPORTIONAL_FUNCTION_TPI,
 )
 
@@ -51,121 +51,46 @@ from .const import (
 
 _LOGGER = logging.getLogger(__name__)
 
-STEP_USER_DATA_SCHEMA = vol.Schema(
-    {
-        vol.Required(CONF_NAME): cv.string,
-        vol.Required(CONF_HEATER): cv.string,
-        vol.Required(CONF_TEMP_SENSOR): cv.string,
-        vol.Required(CONF_CYCLE_MIN, default=5): cv.positive_int,
-        vol.Required(CONF_PROP_FUNCTION, default=PROPORTIONAL_FUNCTION_LINEAR): vol.In(
-            [
-                PROPORTIONAL_FUNCTION_TPI,
-                PROPORTIONAL_FUNCTION_LINEAR,
-                PROPORTIONAL_FUNCTION_ATAN,
-            ]
-        ),
-    }
-)
-# USER_DATA_CONF = [
-#     CONF_NAME,
-#     CONF_HEATER,
-#     CONF_TEMP_SENSOR,
-#     CONF_EXTERNAL_TEMP_SENSOR,
-#     CONF_CYCLE_MIN,
-#     CONF_PROP_FUNCTION,
-# ]
 
-STEP_P_DATA_SCHEMA = vol.Schema(
-    {
-        vol.Required(CONF_PROP_BIAS, default=0.25): vol.Coerce(float),
-    }
-)
-# P_DATA_CONF = [
-#     CONF_PROP_BIAS,
-# ]
-
-STEP_TPI_DATA_SCHEMA = vol.Schema(
-    {
-        vol.Required(CONF_EXTERNAL_TEMP_SENSOR): cv.string,
-        vol.Required(CONF_TPI_COEF_C, default=0.6): vol.Coerce(float),
-        vol.Required(CONF_TPI_COEF_T, default=0.01): vol.Coerce(float),
-    }
-)
-# TPI_DATA_CONF = [
-#     CONF_EXTERNAL_TEMP_SENSOR,
-#     CONF_TPI_COEF_C,
-#     CONF_TPI_COEF_T,
-# ]
-
-STEP_PRESETS_DATA_SCHEMA = vol.Schema(
-    {vol.Optional(v, default=17): vol.Coerce(float) for (k, v) in CONF_PRESETS.items()}
-)
-# PRESETS_DATA_CONF = [v for (_, v) in CONF_PRESETS.items()]
-
-STEP_WINDOW_DATA_SCHEMA = vol.Schema(
-    {
-        vol.Optional(CONF_WINDOW_SENSOR): cv.string,
-        vol.Optional(CONF_WINDOW_DELAY, default=30): cv.positive_int,
-    }
-)
-# WINDOW_DATA_CONF = [CONF_WINDOW_SENSOR, CONF_WINDOW_DELAY]
-
-STEP_MOTION_DATA_SCHEMA = vol.Schema(
-    {
-        vol.Optional(CONF_MOTION_SENSOR): cv.string,
-        vol.Optional(CONF_MOTION_DELAY, default=30): cv.positive_int,
-        vol.Optional(CONF_MOTION_PRESET, default="comfort"): vol.In(
-            CONF_PRESETS_SELECTIONABLE
-        ),
-        vol.Optional(CONF_NO_MOTION_PRESET, default="eco"): vol.In(
-            CONF_PRESETS_SELECTIONABLE
-        ),
-    }
-)
-# MOTION_DATA_CONF = [
-#    CONF_MOTION_SENSOR,
-#    CONF_MOTION_DELAY,
-#    CONF_MOTION_PRESET,
-#    CONF_NO_MOTION_PRESET,
-# ]
-
-STEP_POWER_DATA_SCHEMA = vol.Schema(
-    {
-        vol.Optional(CONF_POWER_SENSOR): cv.string,
-        vol.Optional(CONF_MAX_POWER_SENSOR): cv.string,
-        vol.Optional(CONF_DEVICE_POWER): vol.Coerce(float),
-    }
-)
-# POWER_DATA_CONF = [CONF_POWER_SENSOR, CONF_MAX_POWER_SENSOR, CONF_DEVICE_POWER]
-
-STEP_PRESENCE_DATA_SCHEMA = vol.Schema(
-    {
-        vol.Optional(CONF_PRESENCE_SENSOR): cv.string,
-        vol.Optional(CONF_NO_PRESENCE_PRESET): vol.In(CONF_PRESETS_SELECTIONABLE),
-        vol.Optional(CONF_NO_PRESENCE_TEMP_OFFSET): vol.Coerce(float),
-    }
-)
-# PRESENCE_DATA_CONF = [CONF_PRESENCE_SENSOR, CONF_NO_PRESENCE_PRESET, CONF_NO_PRESENCE_TEMP_OFFSET]
+# Not used but can be useful in other context
+# def schema_defaults(schema, **defaults):
+#    """Create a new schema with default values filled in."""
+#    copy = schema.extend({})
+#    for field, field_type in copy.schema.items():
+#        if isinstance(field_type, vol.In):
+#            value = None
+#
+#            if value in field_type.container:
+#                # field.default = vol.default_factory(value)
+#                field.description = {"suggested_value": value}
+#                continue
+#
+#        if field.schema in defaults:
+#            # field.default = vol.default_factory(defaults[field])
+#            field.description = {"suggested_value": defaults[field]}
+#    return copy
+#
 
 
-def schema_defaults(schema, **defaults):
-    """Create a new schema with default values filled in."""
-    copy = schema.extend({})
-    for field, field_type in copy.schema.items():
-        if isinstance(field_type, vol.In):
-            value = None
-            # for dps in dps_list or []:
-            #    if dps.startswith(f"{defaults.get(field)} "):
-            #        value = dps
-            #        break
+def add_suggested_values_to_schema(
+    data_schema: vol.Schema, suggested_values: Mapping[str, Any]
+) -> vol.Schema:
+    """Make a copy of the schema, populated with suggested values.
 
-            if value in field_type.container:
-                field.default = vol.default_factory(value)
-                continue
-
-        if field.schema in defaults:
-            field.default = vol.default_factory(defaults[field])
-    return copy
+    For each schema marker matching items in `suggested_values`,
+    the `suggested_value` will be set. The existing `suggested_value` will
+    be left untouched if there is no matching item.
+    """
+    schema = {}
+    for key, val in data_schema.schema.items():
+        new_key = key
+        if key in suggested_values and isinstance(key, vol.Marker):
+            # Copy the marker to not modify the flow schema
+            new_key = copy.copy(key)
+            new_key.description = {"suggested_value": suggested_values[key]}
+        schema[new_key] = val
+    _LOGGER.debug("add_suggested_values_to_schema: schema=%s", schema)
+    return vol.Schema(schema)
 
 
 class VersatileThermostatBaseConfigFlow(FlowHandler):
@@ -178,6 +103,76 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
         super().__init__()
         _LOGGER.debug("CTOR BaseConfigFlow infos: %s", infos)
         self._infos = infos
+        self.STEP_USER_DATA_SCHEMA = vol.Schema(
+            {
+                vol.Required(CONF_NAME): cv.string,
+                vol.Required(CONF_HEATER): cv.string,
+                vol.Required(CONF_TEMP_SENSOR): cv.string,
+                vol.Required(CONF_EXTERNAL_TEMP_SENSOR): cv.string,
+                vol.Required(CONF_CYCLE_MIN, default=5): cv.positive_int,
+                vol.Required(
+                    CONF_PROP_FUNCTION, default=PROPORTIONAL_FUNCTION_TPI
+                ): vol.In(
+                    [
+                        PROPORTIONAL_FUNCTION_TPI,
+                    ]
+                ),
+            }
+        )
+
+        self.STEP_TPI_DATA_SCHEMA = vol.Schema(
+            {
+                vol.Required(CONF_TPI_COEF_INT, default=0.6): vol.Coerce(float),
+                vol.Required(CONF_TPI_COEF_EXT, default=0.01): vol.Coerce(float),
+            }
+        )
+
+        self.STEP_PRESETS_DATA_SCHEMA = vol.Schema(
+            {
+                vol.Optional(v, default=0.0): vol.Coerce(float)
+                for (k, v) in CONF_PRESETS.items()
+            }
+        )
+
+        self.STEP_WINDOW_DATA_SCHEMA = vol.Schema(
+            {
+                vol.Optional(CONF_WINDOW_SENSOR): cv.string,
+                vol.Optional(CONF_WINDOW_DELAY, default=30): cv.positive_int,
+            }
+        )
+
+        self.STEP_MOTION_DATA_SCHEMA = vol.Schema(
+            {
+                vol.Optional(CONF_MOTION_SENSOR): cv.string,
+                vol.Optional(CONF_MOTION_DELAY, default=30): cv.positive_int,
+                vol.Optional(CONF_MOTION_PRESET, default="comfort"): vol.In(
+                    CONF_PRESETS_SELECTIONABLE
+                ),
+                vol.Optional(CONF_NO_MOTION_PRESET, default="eco"): vol.In(
+                    CONF_PRESETS_SELECTIONABLE
+                ),
+            }
+        )
+
+        self.STEP_POWER_DATA_SCHEMA = vol.Schema(
+            {
+                vol.Optional(CONF_POWER_SENSOR): cv.string,
+                vol.Optional(CONF_MAX_POWER_SENSOR): cv.string,
+                vol.Optional(CONF_DEVICE_POWER): vol.Coerce(float),
+                vol.Optional(CONF_PRESET_POWER): vol.Coerce(float),
+            }
+        )
+
+        self.STEP_PRESENCE_DATA_SCHEMA = vol.Schema(
+            {
+                vol.Optional(CONF_PRESENCE_SENSOR): cv.string,
+            }
+        ).extend(
+            {
+                vol.Optional(v, default=17): vol.Coerce(float)
+                for (k, v) in CONF_PRESETS_AWAY.items()
+            }
+        )
 
     async def validate_input(self, data: dict) -> dict[str]:
         """Validate the user input allows us to connect.
@@ -204,6 +199,21 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
                 )
                 raise UnknownEntity(conf)
 
+    def merge_user_input(self, data_schema: vol.Schema, user_input: dict):
+        """For each schema entry not in user_input, set or remove values in infos"""
+        self._infos.update(user_input)
+        for key, _ in data_schema.schema.items():
+            if key not in user_input and isinstance(key, vol.Marker):
+                _LOGGER.debug(
+                    "add_empty_values_to_user_input: %s is not in user_input", key
+                )
+                if key in self._infos:
+                    self._infos.pop(key)
+            # else:  This don't work but I don't know why. _infos seems broken after this (Not serializable exactly)
+            #     self._infos[key] = user_input[key]
+
+        _LOGGER.debug("merge_user_input: infos is now %s", self._infos)
+
     async def generic_step(self, step_id, data_schema, user_input, next_step_function):
         """A generic method step"""
         _LOGGER.debug(
@@ -223,11 +233,14 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
                 _LOGGER.exception("Unexpected exception")
                 errors["base"] = "unknown"
             else:
-                self._infos.update(user_input)
+                self.merge_user_input(data_schema, user_input)
                 _LOGGER.debug("_info is now: %s", self._infos)
                 return await next_step_function()
 
-        ds = schema_defaults(data_schema, **defaults)  # pylint: disable=invalid-name
+        # ds = schema_defaults(data_schema, **defaults)  # pylint: disable=invalid-name
+        ds = add_suggested_values_to_schema(
+            data_schema=data_schema, suggested_values=defaults
+        )  # pylint: disable=invalid-name
 
         return self.async_show_form(step_id=step_id, data_schema=ds, errors=errors)
 
@@ -235,24 +248,8 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
         """Handle the flow steps"""
         _LOGGER.debug("Into ConfigFlow.async_step_user user_input=%s", user_input)
 
-        async def choose_next_step():
-            """Choose next configuration flow"""
-            _LOGGER.debug("function is %s", self._infos.get(CONF_PROP_FUNCTION, None))
-            if self._infos.get(CONF_PROP_FUNCTION, None) == PROPORTIONAL_FUNCTION_TPI:
-                return await self.async_step_tpi()
-            else:
-                return await self.async_step_p()
-
         return await self.generic_step(
-            "user", STEP_USER_DATA_SCHEMA, user_input, choose_next_step
-        )
-
-    async def async_step_p(self, user_input: dict | None = None) -> FlowResult:
-        """Handle the flow steps"""
-        _LOGGER.debug("Into ConfigFlow.async_step_p user_input=%s", user_input)
-
-        return await self.generic_step(
-            "p", STEP_P_DATA_SCHEMA, user_input, self.async_step_presets
+            "user", self.STEP_USER_DATA_SCHEMA, user_input, self.async_step_tpi
         )
 
     async def async_step_tpi(self, user_input: dict | None = None) -> FlowResult:
@@ -260,7 +257,7 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
         _LOGGER.debug("Into ConfigFlow.async_step_tpi user_input=%s", user_input)
 
         return await self.generic_step(
-            "tpi", STEP_TPI_DATA_SCHEMA, user_input, self.async_step_presets
+            "tpi", self.STEP_TPI_DATA_SCHEMA, user_input, self.async_step_presets
         )
 
     async def async_step_presets(self, user_input: dict | None = None) -> FlowResult:
@@ -268,7 +265,7 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
         _LOGGER.debug("Into ConfigFlow.async_step_presets user_input=%s", user_input)
 
         return await self.generic_step(
-            "presets", STEP_PRESETS_DATA_SCHEMA, user_input, self.async_step_window
+            "presets", self.STEP_PRESETS_DATA_SCHEMA, user_input, self.async_step_window
         )
 
     async def async_step_window(self, user_input: dict | None = None) -> FlowResult:
@@ -276,7 +273,7 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
         _LOGGER.debug("Into ConfigFlow.async_step_window user_input=%s", user_input)
 
         return await self.generic_step(
-            "window", STEP_WINDOW_DATA_SCHEMA, user_input, self.async_step_motion
+            "window", self.STEP_WINDOW_DATA_SCHEMA, user_input, self.async_step_motion
         )
 
     async def async_step_motion(self, user_input: dict | None = None) -> FlowResult:
@@ -284,7 +281,7 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
         _LOGGER.debug("Into ConfigFlow.async_step_motion user_input=%s", user_input)
 
         return await self.generic_step(
-            "motion", STEP_MOTION_DATA_SCHEMA, user_input, self.async_step_power
+            "motion", self.STEP_MOTION_DATA_SCHEMA, user_input, self.async_step_power
         )
 
     async def async_step_power(self, user_input: dict | None = None) -> FlowResult:
@@ -293,7 +290,7 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
 
         return await self.generic_step(
             "power",
-            STEP_POWER_DATA_SCHEMA,
+            self.STEP_POWER_DATA_SCHEMA,
             user_input,
             self.async_step_presence,
         )
@@ -304,7 +301,7 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
 
         return await self.generic_step(
             "presence",
-            STEP_PRESENCE_DATA_SCHEMA,
+            self.STEP_PRESENCE_DATA_SCHEMA,
             user_input,
             self.async_finalize,  # pylint: disable=no-member
         )
@@ -328,7 +325,7 @@ class VersatileThermostatConfigFlow(
 
     async def async_finalize(self):
         """Finalization of the ConfigEntry creation"""
-        _LOGGER.debug("CTOR ConfigFlow.async_finalize")
+        _LOGGER.debug("ConfigFlow.async_finalize")
         return self.async_create_entry(title=self._infos[CONF_NAME], data=self._infos)
 
 
@@ -366,24 +363,8 @@ class VersatileThermostatOptionsFlowHandler(
             "Into OptionsFlowHandler.async_step_user user_input=%s", user_input
         )
 
-        async def choose_next_step():
-            """Choose next configuration flow"""
-            _LOGGER.debug("function is %s", self._infos.get(CONF_PROP_FUNCTION, None))
-            if self._infos.get(CONF_PROP_FUNCTION, None) == PROPORTIONAL_FUNCTION_TPI:
-                return await self.async_step_tpi()
-            else:
-                return await self.async_step_p()
-
         return await self.generic_step(
-            "user", STEP_USER_DATA_SCHEMA, user_input, choose_next_step
-        )
-
-    async def async_step_p(self, user_input: dict | None = None) -> FlowResult:
-        """Handle the p flow steps"""
-        _LOGGER.debug("Into OptionsFlowHandler.async_step_p user_input=%s", user_input)
-
-        return await self.generic_step(
-            "p", STEP_P_DATA_SCHEMA, user_input, self.async_step_presets
+            "user", self.STEP_USER_DATA_SCHEMA, user_input, self.async_step_tpi
         )
 
     async def async_step_tpi(self, user_input: dict | None = None) -> FlowResult:
@@ -393,7 +374,7 @@ class VersatileThermostatOptionsFlowHandler(
         )
 
         return await self.generic_step(
-            "tpi", STEP_TPI_DATA_SCHEMA, user_input, self.async_step_presets
+            "tpi", self.STEP_TPI_DATA_SCHEMA, user_input, self.async_step_presets
         )
 
     async def async_step_presets(self, user_input: dict | None = None) -> FlowResult:
@@ -403,7 +384,7 @@ class VersatileThermostatOptionsFlowHandler(
         )
 
         return await self.generic_step(
-            "presets", STEP_PRESETS_DATA_SCHEMA, user_input, self.async_step_window
+            "presets", self.STEP_PRESETS_DATA_SCHEMA, user_input, self.async_step_window
         )
 
     async def async_step_window(self, user_input: dict | None = None) -> FlowResult:
@@ -413,7 +394,7 @@ class VersatileThermostatOptionsFlowHandler(
         )
 
         return await self.generic_step(
-            "window", STEP_WINDOW_DATA_SCHEMA, user_input, self.async_step_motion
+            "window", self.STEP_WINDOW_DATA_SCHEMA, user_input, self.async_step_motion
         )
 
     async def async_step_motion(self, user_input: dict | None = None) -> FlowResult:
@@ -423,7 +404,7 @@ class VersatileThermostatOptionsFlowHandler(
         )
 
         return await self.generic_step(
-            "motion", STEP_MOTION_DATA_SCHEMA, user_input, self.async_step_power
+            "motion", self.STEP_MOTION_DATA_SCHEMA, user_input, self.async_step_power
         )
 
     async def async_step_power(self, user_input: dict | None = None) -> FlowResult:
@@ -434,7 +415,7 @@ class VersatileThermostatOptionsFlowHandler(
 
         return await self.generic_step(
             "power",
-            STEP_POWER_DATA_SCHEMA,
+            self.STEP_POWER_DATA_SCHEMA,
             user_input,
             self.async_step_presence,  # pylint: disable=no-member
         )
@@ -447,7 +428,7 @@ class VersatileThermostatOptionsFlowHandler(
 
         return await self.generic_step(
             "presence",
-            STEP_PRESENCE_DATA_SCHEMA,
+            self.STEP_PRESENCE_DATA_SCHEMA,
             user_input,
             self.async_finalize,  # pylint: disable=no-member
         )

custom_components/versatile_thermostat/const.py

@@ -3,7 +3,6 @@
 from homeassistant.const import CONF_NAME
 from homeassistant.components.climate.const import (
     # PRESET_ACTIVITY,
-    PRESET_AWAY,
     PRESET_BOOST,
     PRESET_COMFORT,
     PRESET_ECO,
@@ -11,8 +10,6 @@ from homeassistant.components.climate.const import (
 )
 
 from .prop_algorithm import (
-    PROPORTIONAL_FUNCTION_ATAN,
-    PROPORTIONAL_FUNCTION_LINEAR,
     PROPORTIONAL_FUNCTION_TPI,
 )
 
@@ -30,31 +27,39 @@ CONF_MOTION_SENSOR = "motion_sensor_entity_id"
 CONF_DEVICE_POWER = "device_power"
 CONF_CYCLE_MIN = "cycle_min"
 CONF_PROP_FUNCTION = "proportional_function"
-CONF_PROP_BIAS = "proportional_bias"
 CONF_WINDOW_DELAY = "window_delay"
 CONF_MOTION_DELAY = "motion_delay"
 CONF_MOTION_PRESET = "motion_preset"
 CONF_NO_MOTION_PRESET = "no_motion_preset"
-CONF_TPI_COEF_C = "tpi_coefc"
-CONF_TPI_COEF_T = "tpi_coeft"
+CONF_TPI_COEF_INT = "tpi_coef_int"
+CONF_TPI_COEF_EXT = "tpi_coef_ext"
 CONF_PRESENCE_SENSOR = "presence_sensor_entity_id"
-CONF_NO_PRESENCE_PRESET = "no_presence_preset"
-CONF_NO_PRESENCE_TEMP_OFFSET = "no_presence_temp_offset"
+CONF_PRESET_POWER = "power_temp"
 
 CONF_PRESETS = {
     p: f"{p}_temp"
     for p in (
         PRESET_ECO,
-        PRESET_AWAY,
-        PRESET_BOOST,
         PRESET_COMFORT,
-        PRESET_POWER,
+        PRESET_BOOST,
     )
 }
 
-CONF_PRESETS_SELECTIONABLE = [PRESET_ECO, PRESET_COMFORT, PRESET_AWAY, PRESET_BOOST]
+PRESET_AWAY_SUFFIX = "_away"
+
+CONF_PRESETS_AWAY = {
+    p: f"{p}_temp"
+    for p in (
+        PRESET_ECO + PRESET_AWAY_SUFFIX,
+        PRESET_BOOST + PRESET_AWAY_SUFFIX,
+        PRESET_COMFORT + PRESET_AWAY_SUFFIX,
+    )
+}
+
+CONF_PRESETS_SELECTIONABLE = [PRESET_ECO, PRESET_COMFORT, PRESET_BOOST]
 
 CONF_PRESETS_VALUES = list(CONF_PRESETS.values())
+CONF_PRESETS_AWAY_VALUES = list(CONF_PRESETS_AWAY.values())
 
 ALL_CONF = (
     [
@@ -73,20 +78,19 @@ ALL_CONF = (
         CONF_DEVICE_POWER,
         CONF_CYCLE_MIN,
         CONF_PROP_FUNCTION,
-        CONF_PROP_BIAS,
-        CONF_TPI_COEF_C,
-        CONF_TPI_COEF_T,
+        CONF_TPI_COEF_INT,
+        CONF_TPI_COEF_EXT,
         CONF_PRESENCE_SENSOR,
-        CONF_NO_PRESENCE_PRESET,
-        CONF_NO_PRESENCE_TEMP_OFFSET,
     ]
-    + CONF_PRESETS_VALUES,
+    + CONF_PRESETS_VALUES
+    + CONF_PRESETS_AWAY_VALUES,
 )
 
 CONF_FUNCTIONS = [
-    PROPORTIONAL_FUNCTION_LINEAR,
-    PROPORTIONAL_FUNCTION_ATAN,
     PROPORTIONAL_FUNCTION_TPI,
 ]
 
 SUPPORT_FLAGS = SUPPORT_TARGET_TEMPERATURE
+
+SERVICE_SET_PRESENCE = "set_presence"
+SERVICE_SET_PRESET_TEMPERATURE = "set_preset_temperature"

custom_components/versatile_thermostat/prop_algorithm.py

@@ -16,22 +16,24 @@ class PropAlgorithm:
     """This class aims to do all calculation of the Proportional alogorithm"""
 
     def __init__(
-        self, function_type: str, bias: float, tpi_coefc, tpi_coeft, cycle_min: int
+        self,
+        function_type: str,
+        tpi_coef_int,
+        tpi_coef_ext,
+        cycle_min: int,
     ):
         """Initialisation of the Proportional Algorithm"""
         _LOGGER.debug(
-            "Creation new PropAlgorithm function_type: %s, bias: %s, tpi_coefc: %s, tpi_coeft: %s, cycle_min:%d",
+            "Creation new PropAlgorithm function_type: %s, tpi_coef_int: %s, tpi_coef_ext: %s, cycle_min:%d",
             function_type,
-            bias,
-            tpi_coefc,
-            tpi_coeft,
+            tpi_coef_int,
+            tpi_coef_ext,
             cycle_min,
         )
         # TODO test function_type, bias, cycle_min
         self._function = function_type
-        self._bias = bias
-        self._tpi_coefc = tpi_coefc
-        self._tpi_coeft = tpi_coeft
+        self._tpi_coef_int = tpi_coef_int
+        self._tpi_coef_ext = tpi_coef_ext
         self._cycle_min = cycle_min
         self._on_percent = 0
         self._on_time_sec = 0
@@ -52,13 +54,10 @@ class PropAlgorithm:
                 target_temp - ext_current_temp if ext_current_temp is not None else 0
             )
 
-            if self._function == PROPORTIONAL_FUNCTION_LINEAR:
-                self._on_percent = 0.25 * delta_temp + self._bias
-            elif self._function == PROPORTIONAL_FUNCTION_ATAN:
-                self._on_percent = math.atan(delta_temp + self._bias) / 1.4
-            elif self._function == PROPORTIONAL_FUNCTION_TPI:
+            if self._function == PROPORTIONAL_FUNCTION_TPI:
                 self._on_percent = (
-                    self._tpi_coefc * delta_temp + self._tpi_coeft * delta_ext_temp
+                    self._tpi_coef_int * delta_temp
+                    + self._tpi_coef_ext * delta_ext_temp
                 )
             else:
                 _LOGGER.warning(

custom_components/versatile_thermostat/services.yaml

@@ -0,0 +1,71 @@
+set_presence:
+    name: Set presence
+    description: Force the presence mode in thermostat
+    target:
+        entity:
+            multiple: true
+            integration: versatile_thermostat
+    fields:
+        presence:
+            name: Presence
+            description: Presence setting
+            required: true
+            advanced: false
+            example: "on"
+            default: "on"
+            selector:
+                select:
+                    options:
+                        - "on"
+                        - "off"
+                        - "home"
+                        - "not_home"
+
+set_preset_temperature:
+    name: Set temperature preset
+    description: Change the target temperature of a preset
+    target:
+        entity:
+            multiple: true
+            integration: versatile_thermostat
+    fields:
+        preset:
+            name: Preset
+            description: Preset name
+            required: true
+            advanced: false
+            example: "comfort"
+            selector:
+                select:
+                    options:
+                        - "eco"
+                        - "comfort"
+                        - "boost"
+        temperature:
+            name: Temperature when present
+            description: Target temperature for the preset when present
+            required: false
+            advanced: false
+            example: "19.5"
+            default: "17"
+            selector:
+                number:
+                    min: 7
+                    max: 35
+                    step: 0.1
+                    unit_of_measurement: °
+                    mode: slider
+        temperature_away:
+            name: Temperature when not present
+            description: Target temperature for the preset when not present
+            required: false
+            advanced: false
+            example: "17"
+            default: "15"
+            selector:
+                number:
+                    min: 7
+                    max: 35
+                    step: 0.1
+                    unit_of_measurement: °
+                    mode: slider

custom_components/versatile_thermostat/strings.json

@@ -10,35 +10,26 @@
           "name": "Name",
           "heater_entity_id": "Heater entity id",
           "temperature_sensor_entity_id": "Temperature sensor entity id",
+          "external_temperature_sensor_entity_id": "External temperature sensor entity id",
           "cycle_min": "Cycle duration (minutes)",
-          "proportional_function": "Function to use (linear is less aggressive)"
-        }
-      },
-      "p": {
-        "title": "Proportional",
-        "description": "Proportional attributes",
-        "data": {
-          "proportional_bias": "A bias to use in proportional algorithm"
+          "proportional_function": "Algorithm to use (TPI is the only one for now)"
         }
       },
       "tpi": {
         "title": "TPI",
         "description": "Time Proportional Integral attributes",
         "data": {
-          "external_temperature_sensor_entity_id": "External temperature sensor entity id",
-          "tpi_coefc": "Coefficient to use for internal temperature delta",
-          "tpi_coeft": "Coefficient to use for external temperature delta"
+          "tpi_coef_int": "Coefficient to use for internal temperature delta",
+          "tpi_coef_ext": "Coefficient to use for external temperature delta"
         }
       },
       "presets": {
         "title": "Presets",
-        "description": "For each presets, give the target temperature",
+        "description": "For each presets, give the target temperature (0 to ignore preset)",
         "data": {
           "eco_temp": "Temperature in Eco preset",
-          "away_temp": "Temperature in Away preset",
           "comfort_temp": "Temperature in Comfort preset",
-          "boost_temp": "Temperature in Boost preset",
-          "power_temp": "Temperature in Power (overpowering) preset"
+          "boost_temp": "Temperature in Boost preset"
         }
       },
       "window": {
@@ -65,7 +56,8 @@
         "data": {
           "power_sensor_entity_id": "Power sensor entity id",
           "max_power_sensor_entity_id": "Max power sensor entity id",
-          "device_power": "Device power (kW)"
+          "device_power": "Device power (kW)",
+          "power_temp": "Temperature for Power shedding"
         }
       },
       "presence": {
@@ -73,8 +65,9 @@
         "description": "Presence management attributes.\nGives the a presence sensor of your home (true is someone is present).\nThen specify either the preset to use when presence sensor is false or the offset in temperature to apply.\nIf preset is given, the offset will not be used.\nLeave corresponding entity_id empty if not used.",
         "data": {
           "presence_sensor_entity_id": "Presence sensor entity id (true is present)",
-          "no_presence_preset": "Preset to use when no one is present",
-          "no_presence_offset": "Temperature offset to apply to current temperature is no one is present"
+          "eco_away_temp": "Temperature in Eco preset when no presence",
+          "comfort_away_temp": "Temperature in Comfort preset when no presence",
+          "boost_away_temp": "Temperature in Boost preset when no presence"
         }
       }
     },
@@ -96,35 +89,26 @@
           "name": "Name",
           "heater_entity_id": "Heater entity id",
           "temperature_sensor_entity_id": "Temperature sensor entity id",
+          "external_temperature_sensor_entity_id": "External temperature sensor entity id",
           "cycle_min": "Cycle duration (minutes)",
-          "proportional_function": "Function to use (linear is less aggressive)"
-        }
-      },
-      "p": {
-        "title": "Proportional",
-        "description": "Proportional attributes",
-        "data": {
-          "proportional_bias": "A bias to use in proportional algorithm"
+          "proportional_function": "Algorithm to use (TPI is the only one for now)"
         }
       },
       "tpi": {
         "title": "TPI",
         "description": "Time Proportional Integral attributes",
         "data": {
-          "external_temperature_sensor_entity_id": "External temperature sensor entity id",
-          "tpi_coefc": "Coefficient to use for internal temperature delta",
-          "tpi_coeft": "Coefficient to use for external temperature delta"
+          "tpi_coef_int": "Coefficient to use for internal temperature delta",
+          "tpi_coef_ext": "Coefficient to use for external temperature delta"
         }
       },
       "presets": {
         "title": "Presets",
-        "description": "For each presets, give the target temperature",
+        "description": "For each presets, give the target temperature (0 to ignore preset)",
         "data": {
           "eco_temp": "Temperature in Eco preset",
-          "away_temp": "Temperature in Away preset",
           "comfort_temp": "Temperature in Comfort preset",
-          "boost_temp": "Temperature in Boost preset",
-          "power_temp": "Temperature in Power (overpowering) preset"
+          "boost_temp": "Temperature in Boost preset"
         }
       },
       "window": {
@@ -151,7 +135,8 @@
         "data": {
           "power_sensor_entity_id": "Power sensor entity id",
           "max_power_sensor_entity_id": "Max power sensor entity id",
-          "device_power": "Device power (kW)"
+          "device_power": "Device power (kW)",
+          "power_temp": "Temperature for Power shedding"
         }
       },
       "presence": {
@@ -159,8 +144,9 @@
         "description": "Presence management attributes.\nGives the a presence sensor of your home (true is someone is present).\nThen specify either the preset to use when presence sensor is false or the offset in temperature to apply.\nIf preset is given, the offset will not be used.\nLeave corresponding entity_id empty if not used.",
         "data": {
           "presence_sensor_entity_id": "Presence sensor entity id (true is present)",
-          "no_presence_preset": "Preset to use when no one is present",
-          "no_presence_offset": "Temperature offset to apply to current temperature is no one is present"
+          "eco_away_temp": "Temperature in Eco preset when no presence",
+          "comfort_away_temp": "Temperature in Comfort preset when no presence",
+          "boost_away_temp": "Temperature in Boost preset when no presence"
         }
       }
     },

custom_components/versatile_thermostat/translations/en.json

@@ -10,35 +10,26 @@
           "name": "Name",
           "heater_entity_id": "Heater entity id",
           "temperature_sensor_entity_id": "Temperature sensor entity id",
+          "external_temperature_sensor_entity_id": "External temperature sensor entity id",
           "cycle_min": "Cycle duration (minutes)",
-          "proportional_function": "Function to use (linear is less aggressive)"
-        }
-      },
-      "p": {
-        "title": "Proportional",
-        "description": "Proportional attributes",
-        "data": {
-          "proportional_bias": "A bias to use in proportional algorithm"
+          "proportional_function": "Algorithm to use (TPI is the only one for now)"
         }
       },
       "tpi": {
         "title": "TPI",
         "description": "Time Proportional Integral attributes",
         "data": {
-          "external_temperature_sensor_entity_id": "External temperature sensor entity id",
-          "tpi_coefc": "Coefficient to use for internal temperature delta",
-          "tpi_coeft": "Coefficient to use for external temperature delta"
+          "tpi_coef_int": "Coefficient to use for internal temperature delta",
+          "tpi_coef_ext": "Coefficient to use for external temperature delta"
         }
       },
       "presets": {
         "title": "Presets",
-        "description": "For each presets, give the target temperature",
+        "description": "For each presets, give the target temperature (0 to ignore preset)",
         "data": {
           "eco_temp": "Temperature in Eco preset",
-          "away_temp": "Temperature in Away preset",
           "comfort_temp": "Temperature in Comfort preset",
-          "boost_temp": "Temperature in Boost preset",
-          "power_temp": "Temperature in Power (overpowering) preset"
+          "boost_temp": "Temperature in Boost preset"
         }
       },
       "window": {
@@ -65,7 +56,8 @@
         "data": {
           "power_sensor_entity_id": "Power sensor entity id",
           "max_power_sensor_entity_id": "Max power sensor entity id",
-          "device_power": "Device power (kW)"
+          "device_power": "Device power (kW)",
+          "power_temp": "Temperature for Power shedding"
         }
       },
       "presence": {
@@ -73,8 +65,9 @@
         "description": "Presence management attributes.\nGives the a presence sensor of your home (true is someone is present).\nThen specify either the preset to use when presence sensor is false or the offset in temperature to apply.\nIf preset is given, the offset will not be used.\nLeave corresponding entity_id empty if not used.",
         "data": {
           "presence_sensor_entity_id": "Presence sensor entity id (true is present)",
-          "no_presence_preset": "Preset to use when no one is present",
-          "no_presence_offset": "Temperature offset to apply to current temperature is no one is present"
+          "eco_away_temp": "Temperature in Eco preset when no presence",
+          "comfort_away_temp": "Temperature in Comfort preset when no presence",
+          "boost_away_temp": "Temperature in Boost preset when no presence"
         }
       }
     },
@@ -96,35 +89,26 @@
           "name": "Name",
           "heater_entity_id": "Heater entity id",
           "temperature_sensor_entity_id": "Temperature sensor entity id",
+          "external_temperature_sensor_entity_id": "External temperature sensor entity id",
           "cycle_min": "Cycle duration (minutes)",
-          "proportional_function": "Function to use (linear is less aggressive)"
-        }
-      },
-      "p": {
-        "title": "Proportional",
-        "description": "Proportional attributes",
-        "data": {
-          "proportional_bias": "A bias to use in proportional algorithm"
+          "proportional_function": "Algorithm to use (TPI is the only one for now)"
         }
       },
       "tpi": {
         "title": "TPI",
         "description": "Time Proportional Integral attributes",
         "data": {
-          "external_temperature_sensor_entity_id": "External temperature sensor entity id",
-          "tpi_coefc": "Coefficient to use for internal temperature delta",
-          "tpi_coeft": "Coefficient to use for external temperature delta"
+          "tpi_coef_int": "Coefficient to use for internal temperature delta",
+          "tpi_coef_ext": "Coefficient to use for external temperature delta"
         }
       },
       "presets": {
         "title": "Presets",
-        "description": "For each presets, give the target temperature",
+        "description": "For each presets, give the target temperature (0 to ignore preset)",
         "data": {
           "eco_temp": "Temperature in Eco preset",
-          "away_temp": "Temperature in Away preset",
           "comfort_temp": "Temperature in Comfort preset",
-          "boost_temp": "Temperature in Boost preset",
-          "power_temp": "Temperature in Power (overpowering) preset"
+          "boost_temp": "Temperature in Boost preset"
         }
       },
       "window": {
@@ -151,7 +135,8 @@
         "data": {
           "power_sensor_entity_id": "Power sensor entity id",
           "max_power_sensor_entity_id": "Max power sensor entity id",
-          "device_power": "Device power (kW)"
+          "device_power": "Device power (kW)",
+          "power_temp": "Temperature for Power shedding"
         }
       },
       "presence": {
@@ -159,8 +144,9 @@
         "description": "Presence management attributes.\nGives the a presence sensor of your home (true is someone is present).\nThen specify either the preset to use when presence sensor is false or the offset in temperature to apply.\nIf preset is given, the offset will not be used.\nLeave corresponding entity_id empty if not used.",
         "data": {
           "presence_sensor_entity_id": "Presence sensor entity id (true is present)",
-          "no_presence_preset": "Preset to use when no one is present",
-          "no_presence_offset": "Temperature offset to apply to current temperature is no one is present"
+          "eco_away_temp": "Temperature in Eco preset when no presence",
+          "comfort_away_temp": "Temperature in Comfort preset when no presence",
+          "boost_away_temp": "Temperature in Boost preset when no presence"
         }
       }
     },

custom_components/versatile_thermostat/translations/fr.json

@@ -10,35 +10,26 @@
           "name": "Nom",
           "heater_entity_id": "Radiateur entity id",
           "temperature_sensor_entity_id": "Température sensor entity id",
+          "external_temperature_sensor_entity_id": "Temperature exterieure sensor entity id",
           "cycle_min": "Durée du cycle (minutes)",
-          "proportional_function": "Fonction de l'algorithm proportionnel à utiliser (linear est moins aggressive)"
-        }
-      },
-      "p": {
-        "title": "Proportional",
-        "description": "Attributs des algos Proportionnel",
-        "data": {
-          "proportional_bias": "Un biais à utiliser dans l'algorithm proportionnel"
+          "proportional_function": "Algorithm à utiliser (Seul TPI est disponible pour l'instant)"
         }
       },
       "tpi": {
         "title": "TPI",
         "description": "Attributs de l'algo Time Proportional Integral",
         "data": {
-          "external_temperature_sensor_entity_id": "Temperature exterieure sensor entity id",
-          "tpi_coefc": "coeff_c : Coefficient à utiliser pour le delta de température interne",
-          "tpi_coeft": "coeff_t : Coefficient à utiliser pour le delta de température externe"
+          "tpi_coef_int": "coeff_int : Coefficient à utiliser pour le delta de température interne",
+          "tpi_coef_ext": "coeff_ext : Coefficient à utiliser pour le delta de température externe"
         }
       },
       "presets": {
         "title": "Presets",
-        "description": "Pour chaque preset, donnez la température cible",
+        "description": "Pour chaque preset, donnez la température cible (0 pour ignorer le preset)",
         "data": {
           "eco_temp": "Température en preset Eco",
-          "away_temp": "Température en preset Away",
           "comfort_temp": "Température en preset Comfort",
-          "boost_temp": "Température en preset Boost",
-          "power_temp": "Température en preset Power (overpowering)"
+          "boost_temp": "Température en preset Boost"
         }
       },
       "window": {
@@ -65,7 +56,8 @@
         "data": {
           "power_sensor_entity_id": "Capteur de puissance totale (entity id)",
           "max_power_sensor_entity_id": "Capteur de puissance Max (entity id)",
-          "device_power": "Puissance de l'équipement"
+          "device_power": "Puissance de l'équipement",
+          "power_temp": "Température si délestaqe"
         }
       },
       "presence": {
@@ -73,8 +65,9 @@
         "description": "Donnez un capteur de présence (true si quelqu'un est présent).\nEnsuite spécifiez soit un preset à utiliser, soit un offset de température à appliquer lorsque personne n'est présent.\nSi le préset est utilisé, l'offset ne sera pas pris en compte.\nLaissez l'entity id vide si la gestion de la présence est non utilisée.",
         "data": {
           "presence_sensor_entity_id": "Capteur de présence entity id (true si quelqu'un est présent)",
-          "no_presence_preset": "Preset à utiliser si personne n'est présent",
-          "no_presence_offset": "Offset de température à utiliser si personne n'est présent"
+          "eco_away_temp": "Température en preset Eco en cas d'absence",
+          "comfort_away_temp": "Température en preset Comfort en cas d'absence",
+          "boost_away_temp": "Température en preset Boost en cas d'absence"
         }
       }
     },
@@ -96,35 +89,26 @@
           "name": "Nom",
           "heater_entity_id": "Radiateur entity id",
           "temperature_sensor_entity_id": "Température sensor entity id",
+          "external_temperature_sensor_entity_id": "Temperature exterieure sensor entity id",
           "cycle_min": "Durée du cycle (minutes)",
-          "proportional_function": "Fonction de l'algorithm proportionnel à utiliser (linear est moins aggressive)"
-        }
-      },
-      "p": {
-        "title": "Proportional",
-        "description": "Attributs des algos Proportionnel",
-        "data": {
-          "proportional_bias": "Un biais à utiliser dans l'algorithm proportionnel"
+          "proportional_function": "Algorithm à utiliser (Seul TPI est disponible pour l'instant)"
         }
       },
       "tpi": {
         "title": "TPI",
         "description": "Attributs de l'algo Time Proportional Integral",
         "data": {
-          "external_temperature_sensor_entity_id": "Temperature exterieure sensor entity id",
-          "tpi_coefc": "coeff_c : Coefficient à utiliser pour le delta de température interne",
-          "tpi_coeft": "coeff_t : Coefficient à utiliser pour le delta de température externe"
+          "tpi_coef_int": "coeff_int : Coefficient à utiliser pour le delta de température interne",
+          "tpi_coef_ext": "coeff_ext : Coefficient à utiliser pour le delta de température externe"
         }
       },
       "presets": {
         "title": "Presets",
-        "description": "Pour chaque preset, donnez la température cible",
+        "description": "Pour chaque preset, donnez la température cible (0 pour ignorer le preset)",
         "data": {
           "eco_temp": "Température en preset Eco",
-          "away_temp": "Température en preset Away",
           "comfort_temp": "Température en preset Comfort",
-          "boost_temp": "Température en preset Boost",
-          "power_temp": "Température en preset Power (overpowering)"
+          "boost_temp": "Température en preset Boost"
         }
       },
       "window": {
@@ -151,7 +135,8 @@
         "data": {
           "power_sensor_entity_id": "Capteur de puissance totale (entity id)",
           "max_power_sensor_entity_id": "Capteur de puissance Max (entity id)",
-          "device_power": "Puissance de l'équipement"
+          "device_power": "Puissance de l'équipement",
+          "power_temp": "Température si délestaqe"
         }
       },
       "presence": {
@@ -159,8 +144,9 @@
         "description": "Donnez un capteur de présence (true si quelqu'un est présent).\nEnsuite spécifiez soit un preset à utiliser, soit un offset de température à appliquer lorsque personne n'est présent.\nSi le préset est utilisé, l'offset ne sera pas pris en compte.\nLaissez l'entity id vide si la gestion de la présence est non utilisée.",
         "data": {
           "presence_sensor_entity_id": "Capteur de présence entity id (true si quelqu'un est présent)",
-          "no_presence_preset": "Preset à utiliser si personne n'est présent",
-          "no_presence_offset": "Offset de température à utiliser si personne n'est présent"
+          "eco_away_temp": "Température en preset Eco en cas d'absence",
+          "comfort_away_temp": "Température en preset Comfort en cas d'absence",
+          "boost_away_temp": "Température en preset Boost en cas d'absence"
         }
       }
     },